Surface grinding machine

BÜTFERING SPW209RT

Condition: used, Tool presetter EZSET EZ400 Dcsdpsuhb Stefx Aa Nod

Condition: like new (used), Year of construction: 2017, TRUMPF TruDisk 5001 (6C) * MFD 2017, as-new condition * laser power: 5 kW * wavelength: 1030 nm Dodsqfguaspfx Aa Nocd * beam quality: 4 mm mrad * beam switch for 4 fiber exits, min. fiber diameter: 100 µm * fiber connector: LLK-D * option: field bus interface & IIO3-card * 2 identical lasers available

Condition: good (used), functionality: fully functional, Year of construction: 2006, laser power: 4,000 W, AVAILABLE AT SHORT NOTICE: TRUMPF Trumatic L 3030 - 4 kw - Year 2006 TECHNICAL DATA: Make: TRUMPF Type: L 3030 - 4 kw Year of manufacture: 2006 Working area: 3,000 x 1,500 x 115 mm Control: Siemens Sinumerik 840 D Laser power: 4,000 watts Max. Sheet thickness mild steel: 20 mm Max. Sheet thickness stainless steel: 15 mm Max. Sheet thickness aluminum: 10 mm Operating hours: NC Machine regularly serviced by TRUMPF! Transmitter tube: new 2024 TASC laser control: new 2022 Driver stage: replaced 2018 Magnetic bearing electronics: new 2016 STANDARD EQUIPMENT: - Closed machine frame with integrated laser unit Laser unit: TLF 2000 high-frequency excited CO2 laser, maintenance-free turboradial blower, mirror telescope, cooling unit, logbook function - Automatic pallet changer - Longitudinal conveyor belt for small parts/waste - Drives: maintenance-free three-phase servomotors - Cutting head quick-change device - Laser cutting head with 5" lens and laser cutting head with 7.5" lens - Programmable cutting gas pressure setting - APC capacitive height control and process control - AutoLas Plus automatic focus position adjustment - Laser power control - Position laser diode - HI-LAS high-pressure cutting - Fast processing with SprintLas - ContourLas for the production of small holes - PMS plasma sensor technology - Automatic sheet edge detection - Programmable power cycles - Microweld - Automatic switch-off - Work area lighting - Sinumerik 840D control system: open control system on PC basis, simple operation, online help, integrated e-shop, diagnostic functions, maintenance logbook, technology data, teleservice - Workshop programming ToPs 100 lite - Safety: multi-beam light barriers, beam guidance fully encapsulated and ventilated, monitoring system, multi-chamber extraction and compact dust extractor, protective cabin - 3.5" floppy disk drive - TFT color screen - Electrical equipment: Voltage 400 V / 50 Hz - Paint finish: Standard RAL 9002/5010 Dcedpfxeuthz Ts Aa Nod EXTENDED EQUIPMENT: - TLF 4000 laser incl. lens monitoring sensors - PCS Process Control System

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, type of input current: AC, input voltage: 400 V, working width: 1,100 mm, overall weight: 1,300 kg, workpiece width (max.): 600 mm, compressed air connection: 6 bar, sheet thickness (max.): 40 mm, number of previous owners: 1, height adjustment type: electric, table length: 3,000 mm, table height: 850 mm, table width: 600 mm, warranty duration: 3 months, Operating mode: dry Dsdsw U A Dmopfx Aa Nocd Application description: Deburring of steel and stainless steel components Year of manufacture: 2007 Standards: CE, EU Machinery Directive 98/37/EC, VDE Units of measurement: mm, bar Operating manual: 1x manual included Paintwork: RAL 9002 white (textured), outfeed table RAL 5010 gentian blue Planetary head station with 3 units: Planetary head design with 6 tools per unit, each driven by a 1.3 kW motor; speed controlled by frequency converter, 100–300 rpm; disc station with electric height adjustment. Technical data: Working width: 1100 mm Table height adjustment: 0.55 kW motor Planetary head adjustment drive: 0.18 kW Feed drive: 1.3 kW (Lenze Motec) Conveyor belt dimensions: 1100 x 3000 mm (high wear-resistant design) Workpiece thickness: 0.8 – 40 mm Constant working height: 850 mm Compressed air connection: 6–7 bar Operating voltage: 3x400 Volt/N/PE/50 Hz Control voltage: 24 Volt DC Infinitely variable feed rate: 0.5–5 m/min, frequency controlled; automatic workpiece thickness adjustment with start switch (Joucomatic); 400 mm outfeed table with integrated brush for conveyor drive (0.25 kW), DC brake Height adjustment gearbox, vacuum blower, aggregate locking, belts renewed – machine is fully operational and in very good technical condition. Adjusted according to manufacturer’s specifications/standards. Sale includes a 3-month mechanical functional warranty from date of delivery.

Condition: excellent (used), Year of construction: 2016, For sale: Prima Power BCe Smart 2220 (2016) panel bending machine. Main advantages: Servo-electric technology – up to 60% lower energy consumption and up to 70% lower maintenance costs High bending quality and precision Compact layout, operator-friendly design Semi-automatic operation, manual sheet loading/unloading Equipped with a safety system: laser scanners, light curtains Technical specifications: Max. bending length: 2250 mm Max. sheet length: 2850 mm Max. sheet width: 1500 mm Max. panel diagonal: 3000 mm Max. bending height: 204 mm Bending force: 32 t (320 kN) Pressing force: 52 t (510 kN) Processable steel thickness: up to 3.0 mm Minimum thickness: 0.5 mm Average power consumption: 4.0 kWh Additional equipment and features: Dcjdpfxsxfiw Te Aa Ned Software: Master BendCam 2D, Tulus HMI Tool library, visual simulation of the bending process Remote diagnostics, user-friendly control interface Lowerable work surfaces – convenient parts handling Year: 2016 Condition: Used, well-maintained, connected, can be seen in operation. If you have any further questions, we will be happy to answer them.

Condition: excellent (used), Year of construction: 2018, laser wavelength: 1,030 nm, power: 5 kW (6.80 HP), Manufacturer: Trumpf Type: TruDisk 5001(6C) Dcjdsr Izwmjpfx Aa Nod Year of manufacture: 2018 Laser power: 5 kW Wavelength: 1030 nm Beam quality:

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 21,572 h, machine/vehicle number: A3231E0369, control type: CNC control, degree of automation: automatic, controller manufacturer: Siemens, controller model: Sinumerik 840D SL, laser type: fiber laser, laser source manufacturer: TRUMPF, laser source model: TruDisk 12001, laser power: 12,000 W, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 50 mm, sheet thickness stainless steel (max.): 50 mm, sheet thickness aluminum (max.): 40 mm, table length: 3,000 mm, table width: 1,500 mm, working length: 3,000 mm, working width: 1,500 mm, positioning speed: 140 m/min, type of cooling: water, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, nozzle changer, safety light barrier, TRUMPF TruLaser 5030 fiber (L76), 12 kW (2022). Dcsdpfx Aaoyddbre Ned High-spec 2D fiber laser cutting machine with 3000 x 1500 mm working area and Siemens Sinumerik control. Key technical data Manufacturer: TRUMPF Model/Type: TruLaser 5030 fiber (L76) Year: 2022 Working area: 3000 x 1500 mm Laser power: 12,000 W Control: Sinumerik 840D SL Max. sheet thickness: Steel 50 mm / Stainless 50 mm / Aluminium 40 mm Max. speed: 140 m/min Configuration / equipment (highlights) Box frame; longitudinal conveyor belt; gantry drive with linear direct drives Process cooler for machine and laser (water/air); work area illumination; pilot laser Spraying equipment; automatic nozzle cleaning; closed beam guidance via laser light cable (LLK); machine status light Cutting unit: protective glass with online monitoring; Dynamic Focus Control; automatic nozzle centering; adaptive lens system Functions/packages: AdjustLine, BrightLine Fiber, ControlLine, FastLine, FlyLine, FocusLine, NitroLine, PierceLine; fusion cut performance; high-speed package; copper & brass cutting packages Safety: CE marking; light barriers; enclosed protective housing; electrical rolling roof Dust extraction: compact / multi-chamber compact dust extractor (as configured) Connectivity: USB, RJ45 network; Central Link; Online Update Manager Pallet changer: automatic pallet changer in longitudinal direction Laser source: external solid-state laser TruDisk 12001 incl. Smart Beam Control Smart Nozzle Automation (nozzle changer + automatic nozzle inspection) Additional equipment: gas prefilters; wide transverse conveyor belt with tipping container (right side); cleaning brush Installation: mezzanine version (steel structure not included) Automation preparation: LiftMaster Compact preparation; LiftMaster Compact 1530 (AL34) available at additional cost Condition & availability Condition: used Available for collection: May 2026 (subject to decommissioning schedule). Viewing/cut test: by appointment (if still under power prior to removal). Commercial / logistics Ex-works (EXW). Buyer to arrange transport, machine will be decommissioned by authorised Trumpf engineers and loaded ono your transport. Export packing and documentation support can be provided if required. Enquiries Please contact for a full specification pack, serial details, hours (laser-on / control-on), service history, tooling/spares list, and video/cut sample requirements.

Condition: ready for operation (used), Year of construction: 2014, Bystronic Bytrans Extended 3015 Dcjdpfx Aasv Ra T Ts Njd

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 55,771 h, laser hours: 35,157 h, laser power: 3,200 W, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness aluminum (max.): 8 mm, table length: 3,000 mm, table width: 1,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 150 mm, positioning speed: 140 m/min, positioning accuracy: 0.02 mm, year of last overhaul: 2024, feed length X-axis: 3,000 mm, feed length Y-axis: 1,500 mm, feed length Z-axis: 150 mm, Equipment: cooling unit, documentation/manual, safety light barrier, The laser is in operation, can be inspected and tested. Regularly serviced in good technical condition. Mirrors completely replaced in 2024. Djdpfx Aaov Hxbbs Nscd

Condition: good (used), functionality: fully functional, Year of construction: 2018, operating hours: 7,238 h, Technical Data Press Force: 360 kN Bending Length: 1020 mm Useful Installation Height: 295 mm Clear Column Distance: 932 mm Throat Depth: 150 mm Working Height¹: 1150 mm Backgauge Axis Travel Values Y-axis Stroke: 120 mm X-axis Travel: 235 mm (max. backgauge area) X-direction: 500 mm R-axis Travel: 75 mm Control Basic Configuration: Windows XPe, PC-based control, Pentium M 1.1 GHz, 15" Connection Values Electrical Connection approx.: 6 kVA Dimensions and Weights Required Floor Space (length × width): 1805 × 1330 mm Height: 2380 mm Weight: 2600 kg Standard Equipment of the TruBend 7036 Machine Stable Machine Frame: Welded construction, stress-relieved heat-treated for both standing and seated operation, includes two side columns, table, and crossbeam. Press Beam: Stress-relieved heat-treated, deformation-optimized. Upper Drive: Highly dynamic, electromechanical direct drive (torque motor), max. working speed of 25 mm/s (depending on selected die width and operating cycle). Inductive Length Measuring System with Temperature Compensation Control Cabinet Air Conditioning Ergonomic Machine Design Backgauge System 3-Axis Rear Backgauge System (one gauge finger): Highly dynamic, safety 3-axis rear backgauge system. Rack-and-pinion drive, CNC-controlled X, R, and Z axes freely programmable, providing a highly adjustable gauging depth and height for maximum precision. Fiberglass gauge finger with hardened metal stop. Dodpfx Aaoyfxfnj Njcd Tool Clamping Upper Tool Clamping: Enables quick and precise tool change—vertical and horizontal; fixed, self-centering. Lower Tool Clamping: Individual V-dies are placed on a special plate. Clamping: by hand, hardened clamping bar and retainer bar. Safety Safety Devices: Safety ensured by emergency stop push button, 2-button foot pedal for both standing and seated operations, laterally sliding protective doors, as well as rear and side safety guards. The side safety guards are made of transparent, impact-resistant plastic. Control TRUMPF TASC 6000: The TRUMPF TASC6000 control system is based on Windows XPe OS, with 1.1 GHz Pentium M and 15" touchscreen, USB interface, and 1 GB RAM. Optional Equipment Levels Backgauge System 6-Axis Rear Backgauge System (2 gauge fingers) Tool Clamping Tool clamping for AMADA US-Style upper tools (manual) Safety BendGuard (with block laser): Optoelectronic safety device enabling fast and safe bending. Permitted press beam speed in foot mode: 220 mm/s Control Graphical Workplace Programming