Hydr. pressbrake
BAYKAL APH 2604x60

Name: BAYKAL APH 2604x60
Brand: BAYKAL
Availability: InStock

Year of construction

2004

Condition

Used

Location

Ahaus

Show map

Machine data

Machine type:: Hydr. pressbrake

Manufacturer:: BAYKAL

Model:: APH 2604x60

Year of construction:: 2004

Condition:: used

Price & Location

Location:: Ahaus

Call

Details about the offer

Listing ID:: A19922895

Reference number:: 1125-9308435

Update:: 05.09.2025

Description

pressure 60.0 t
chamfer lenght 2600 mm
distance between columns 2050 mm
column arm 310 mm
working feed 10.0 mm/sec
return speed 61.0 mm/sec
stroke 100 - 140 mm
dayligth 450 mm
table height 860 mm
oil volume 100 ltr.
Control ELGO P8822
operating pressure max. 200 bar
Number of working hours ca. 2.370 h
voltage 380 V
total power requirement 5.5 kW
weight of the machine ca. 5000 kg.
range L-W-H 3000 x 1850 x 2050 mm
good / well-maintained condition (!!)
with only approx. 2,370 operating hours
current new price approx. 60.000 euros
special price on request

in checked conditions - machine video -
?v=PsUeM3O5wAM

Equipment:
- NC electro-hydraulic press brake
- with ELGO NC control unit "P8822"
* Input of target/actual values ??for back stop
* Input of target/actual values ??for depth adjustment `
* swiveling operation, front left
* manual mode selectable
- NC controlled axes: Y1 + Y2 + X
Duedpew U U Ttjfx Abuen
- NC electro-motorized back stop, on ball screws
* with 4x manually adjustable stop fingers
* adjustment in R+Z axis (manual)
- Upper tool holder SYSTEM A (AMADA), with upper wedge crowning
* 1x split set of upper tools
* clamping jaws with clamping lever (quick clamp)
- 1x universally rotatable MULTI V die block
- 2x side-hinged doors (protective device)
- 1x rear sliding door (protective device)
- 2x front stable support arms
- 1x freely movable foot control (on rollers - movable)
- Operating instructions (PDF)

Seller

Registered since: 2011

778 listings online

Call

Send inquiry

Telephone & Fax

+49 5939 ... show

Fax:

These listings may also fit your interest.

Listing

Tata

1,725 km

Hydr. pressbrake
AmadaITS2 80 25

Call

Condition: excellent (used), functionality: fully functional, Year of construction: 1994, pressing force: 80 t, Equipment: safety light barrier, Brand: Amada Type: ITS 80-25 Year of manufacture: 1994 Pressing force: 80t Bending length: 2500mm Throughput: 400mm Stroke: 100mm Power: 9.5kW Overall dimensions: 3010*2230*2230mm Weight: 4950kg Duedjvncifopfx Abujn

See details

Listing

Zuchwil

1,186 km

Polishing machine
IMM72780

Call

Condition: excellent (used), IMM 72780 Double-sided polishing machine Mint condition, the machine has hardly been used. TECHNICAL DATA Polishing wheel: 100 - 500 mm shafts: 35 mm Spindle speed: 1500 rpm Voltage: 400 V, 50 Hz Weight of basic machine: Approx. 400 kg Duedpfxsu Hanyj Abujn No responsibility is taken for the correctness, completeness and up-to-dateness of the information.

See details

Listing

Laser cutting machine Prima Power Palatino 1530

Korschenbroich

808 km

Laser cutting machine
Prima PowerPalatino 1530

Call

Listing

Mouscron

684 km

Press brake
LVDPPBL 135/30

Call

Condition: excellent (used), functionality: fully functional, Year of construction: 1999, Hydraulic press brake PPBL 135/30 Year of construction 1990 Dusdpow Hca Hefx Abusn Technical specifications Force 1350kN Working length 3050mm Distance between uprights 2250mm Stroke 110mm Distance table – ram 310mm Gap 200mm Width table 180mm Approach speed 100mm/s Working speed 8mm/s Return speed 65mm/s weight 6500 kg motor 7.5kW Voltage 3 x 380V Oil-tank 120L Options inlcuded; • Back gauge with 2 fingers • Range of back gauge 600mm • 2 front supports of 300mm • Table with center slot Tooling included with machine; • R10.180.78. 6x508mm • Multi-V M90 1x3050mm

See details

Listing

Automatic circular saw KASTO GKS 400 AU/1200 CNC

Wiesbaden

979 km

Automatic circular saw
KASTOGKS 400 AU/1200 CNC

Call

Year of construction: 1988, condition: used, machine/vehicle number: 103.071.3156.78192, disk of circular saw-Ø: 400 u. 425 mm cutting area at 90° round: 130 mm cutting area at 90° square: 120 x 120 mm cutting area in mitre at 45° round: 130 mm cutting area in mitre at 45° square: 110 x 110 mm Dsdpfx Abez N Amoueun cutting speeds: 11 u. 22 m/min forward feed speeds: 670 mm/min cutting length: m. automat. Vorschub bis 1200 mm electrical connection: 380 V, ca. 4 kVA V sawing drive: 1,6/2,5 kW space needed: 1800 x 3800 x 2000 mm weight: ca. 1800 kg

See details

Listing

Press Brake Darley 3.100 mm x 110 Ton Darley EHP 110 31/25

Lemmer

657 km

Press Brake Darley 3.100 mm x 110 Ton
DarleyEHP 110 31/25

Call

Condition: good (used), functionality: fully functional, working width: 3,100 mm, distance between stands: 2,550 mm, back gauge: 1,500 mm, pressing force: 110 t, Bending capacity: 110 Ton Bending length: 3.100 mm Distance between columns: 2.550 mm Back gauge: 1.500 mm Stroke length: 150 mm Throat: 250 mm Rapid approach speed: 100 mm/sec. Bending speed: 8 mm/sec. Return speed: 65 mm/sec. Controller: ESA Kvara S630 Touch Featured with: - Foot pedal - Various tool sets - Light screen security Merlino - Controls renewed in 2018 Country of origin: The Netherlands Djdpfewi N T Esx Abueun Motor power: 7,5 kW Machine LxWxH: 320 x 160 x 244 cm Machine weight: 8.700 kg

See details

Listing

Dinkelsbühl

1,170 km

Press brake
Dener AbkantpresseXL30220

Call

Condition: new, functionality: fully functional, Comparable to Durma, Baykal, Ermaksan, etc. Bending length 3020 mm Dusdsq D Dzlepfx Abuon Pressing force 220 t Approach speed 140 mm/s Bending speed max. 10 mm/s Return speed 130 mm/s Stroke 350 mm Installation height 600 mm Throat depth 450 mm X-axis travel 750 mm X-axis speed 300 mm/s R-axis travel 250 mm R-axis speed 100 mm/s Clear gap between frames 2555 mm Machine length 3730 mm Machine width 2290 mm Overall height 3055 mm Table height 820 mm Motor power 22 kW Oil tank 300 l Machine weight 11,500 kg (technical data may vary depending on equipment) Standard equipment: - 3 CNC axes (Y1, Y2, X) - Press beam double-guided, stable and precise - Robust backgauge, double-guided - Manual backgauge fingers, double-guided on linear rails - Movable front arms with height adjustment - Side and rear safety guards - Lower die adapter rail 60 mm - Manual upper tool clamping system (Promecam system) - Manual crowning - Foot switch with emergency stop - 380 V, 50-60 Hz, 3 phase - LED lighting Including the following options: - Delem DA 66T CNC controller - Fiessler AKAS 2M laser finger protection - FPSC Safety PLC (manual) - X-R axis with servo motors - CNC crowning for high bending accuracy - 2 additional backgauge fingers - Further bending lengths and capacities available with appropriate accessories! -

See details

Listing

Ahaus

779 km

Hydr. pressbrake
AMADAHFE 50-20

Call

Condition: used, Year of construction: 2001, pressure 50.0 t chamfer lenght 2090 mm distance between columns 1665 mm column arm 400 mm table width 60.0 mm ajustment speed 100 mm/sec working feed 10.0 mm/sec return speed 92.0 mm/sec stroke 200 mm table height 910 mm dayligth 470 mm Number of working hours 36.160 h total power requirement 6.0 KW weight of the machine ca. 4850 kg Duodpoxabutjfx Abujn range L-W-H 3458 x 2450 x 2450 mm with only approximately 36.160 operating hours (!!) - Inspected condition - Machine video - ?v=x8Z0h2_wA6s Equipment: - CNC electro-hydraulic press brake - CNC control type OPERATEUR 2 with 8 axes (X1+X2, Y1+Y2, R1+R2, Z1+Z2) * CNC-controlled backgauge adjustment (X-axis) * CNC-controlled vertical adjustment of the stop fingers (R1+R2) * CNC-controlled left-right adjustment of the stop fingers (Z1+Z2) * Hand control unit for manual axes movement * Pivoting control, front left - AMADA/PROMECAM quick clamping system for the upper tool * 1 split set of offset upper tools (UKB 10.512) - AMADA/PROMECAM bottom tool holder * 1x split set of 1-V dies (UKB 20.810) - Side guards (hinged doors) - Rear guards (hinged door) - CE marking - 1x freely movable double foot switch - Operating instructions (PDF)

See details

Listing

Germany

1,034 km

CNC Press Brake
AmadaAPX 100 30

Call

Year of construction: 1995, condition: ready for operation (used), A Promecam (Amada) APX 103 CNC press brake is available. Pressing force: 1000kN, working width: 3000mm, column distance: 2550mm, gap opening: 370mm, stroke: 100mm, column depth: 400mm, infeed speed: 70mm/s, bending speed: 9mm/s, return speed: 85mm/s, drive power: 10.5kW. Machine dimensions X/Y/Z: approx. 3500mm/2200mm/2300mm, weight: approx. 6400kg, control: Amada Operator, operating hours: 36261h. The press is still in operation, therefore the operating hours change continuously. Documentation available. On-site inspection is possible. Duodpfxjwm Nn Ro Abujn

See details

Listing