Plate shear

BAYKAL HNC

Condition: new, Year of construction: 2022, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 15 m/min, overall weight: 7,400 kg, spindle speed (min.): 4,000 rpm, spindle speed (max.): 10 rpm, travel distance Y-axis: 1,500 mm, power: 22 kW (29.91 HP), DYAS Plate Drilling Center - DYAS PDC-1500 Number of Drilling Units 1 Vertical Motor Power 22 kW Spindle Torque 280 Nm Spindle Speed 10-4000 RPM Automatic Tool Changing (ATC) 16 Units Maximum material weight 760 kg Max. Max. Drilling Capacity (mm) Ø40 mm Cedpfxegbfaxs Afloaa

Condition: new, Year of construction: 2025, Swing cut guillotine shear Cutting length 3100mm Material thickness steel 10mm Knife for stainless steel Casdpfxjlac Dro Aflsa Touch control Cybelec backgauge 1000mm Cutting gap adjustable via control Delivery time 3 months

Condition: excellent (used), Year of construction: 2024, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: 2MAM022829, cooling capacity: 1,000 kW (1,359.62 HP), Cooling Capacity: 959 kW Type of Input Current: 3 Phase / 50 Hz / 400 V Type of Cooling: Air-cooled Overall Weight: 7,973 kg (Operating) / 7,597 kg (Rigging) Ambient Temperature (max.): 35°C Ambient Temperature (min.): 12.8°C (based on part load performance) Compressor Type: Screw, semi-hermetic, VSD controlled Total Power Consumption: 309.9 kW Noise Level: 74 dB(A) 10 m Refrigerant Type: R134a, total charge: 242 kg Water Flow Rate: 146.7 m³/h (40.76 L/s) Pressure Drop (Evaporator): 52.2 – 64.1 kPa COP (Full Load): 3.09 IPLV (Part Load): 5.12 Caedpfx Afjimz Uaelea Number of Fans: 14 units (7+7), with low sound kit Nameplate Available: Year of Manufacture: 2018

Condition: new, Year of construction: 2025, * 250 lt Net Volume * Dosing pump included. * Highly wear resistant P.U.Lining (90 Shore) * High performance three phase current drive motor. * Changeable valf for the wastewater decharging * Main swicth and emergency stop switch. Casdpfxsh I N Uds Afloa * Timer and working hours timer * Special construction of control panel(EU Standarts) included

Condition: used, Year of construction: 2008, total length: 3,800 mm, total width: 1,900 mm, total height: 1,700 mm, Weight: 4.500 kg Codpfswt Siksx Afloaa - Year: 2008 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 20725 - Drive system: CNC - Control system brand: Robosoft - Control system type: SP9 - Max. sheet thickness [mm]: 6 - Max. working width [mm]: 3000 - Backgauge depth [mm]: 1000 - Transport dimensions: 3800mm x 1900mm x 1700mm (l x w x h) - Transport weight [kg]: 4500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, Year of construction: 2025, * 60 lt Capacity * 2,2 kW High performance three phase current drive motor. * Adjustable speed control up to 200 rpm. * Control panel and dosing pump included. - The dosage pump automaticly puts the chemical to the bowl * Working hours timer * PU or INOX plate Cjdpfxoh Nnbcj Afleaa * Changeable valve for the wastewater decharging. * Inner bowl has canals and gaps for ensuring non stick wall.

Year of construction: 1997, condition: excellent (used), functionality: fully functional, machine/vehicle number: PP120/40, Hot Wall Pulsed Plasma Nitriding Furnace (tandem with 2 bases) Control system was refurbished in 2018 Furnace Model : Plateg PP120/40 Loading Dimensions Diameter : 1000 mm Height : 1250 mm Max. Load Weight : 1000 kg (gross) Plasma Power : 40 kVA Heaters Power : 3x13,5 kW, (3 zones) Electrical Connection : 400V 3 phase 50 Hz Cjdpfxswmfyve Aflsaa

Condition: new, Year of construction: 2025, table width: 1,500 mm, table length: 4,000 mm, pressing force: 600 t, stroke adjustment: 300 mm, warranty duration: 24 months, stroke length: 300 mm, Equipment: safety light barrier, STANDARD FEATURES: • Steel Construction Body • Pneumatic Clutch Brake • T-Slot Additional Extension Plate • 8 Guided Slide Rams • Adjustable Stroke on Single Connecting Rod • Slide Balancer Piston • Fully Automatic Fine Lubrication System Cedpfx Asvtxc Ssfloaa • PLC Control System • Piano-type Control Panel • Touchscreen LCD Display • Motor Reverse Function • Overload Hydraulic Safety Valve • Motorized Slide Adjustment Mechanism • Light Curtain Safety Barrier • Enclosed Gear Unit in Oil Bath • Dual-coil Safety Valve • Compliance with CE Standards • Production Range for C-Type Eccentric Press from 5 to 300 Tons • Production Range for D-Type Eccentric Press from 60 to 300 Tons • Production Range for H-Type from 150 to 2000 Tons • Country of Origin: Turkey • Warranty Period: 24 Months • Delivery Time: To be specified in the offer. TECHNICAL SPECIFICATIONS: CAPACITY: 600 TON BED (LOWER TABLE) USABLE DIMENSIONS: 1500 x 4000 mm UPPER TABLE USABLE DIMENSIONS: 1500 x 4000 mm FIXED STROKE LENGTH: 300 mm RATED TONNAGE: 10 mm SPEED (SPM): 20-30 MAXIMUM CLOSED DIE HEIGHT: 600 mm MINIMUM CLOSED DIE HEIGHT: 480 mm SIDE WINDOW DIMENSIONS: 1000 x 1000 mm ADJUSTMENT (SLIDE ADJUSTMENT): 120 mm NUMBER OF CONNECTING RODS: 2 units NUMBER OF ECCENTRIC SHAFTS (CRANKS): 2 units SAFETY VALVE: Hydraulic Safety Valve CONTROL PANEL ELECTRICAL COMPONENTS: SIEMENS - SCHNEIDER LUBRICATION SYSTEM: Automatic Lubrication DISPLAY – PLC – INVERTER: SIEMENS - PILZ SAFETY BARRIER: LEUZE OPERATION SYSTEM: Pneumatic Clutch and Brake Combination DIE MEMORY: 99 programs INSTALLATION TYPE: Floor Mounted BODY TYPE: Monoblock MOTOR POWER: 65 kW – IE3 MOTOR SPEED (RPM): 1450 APPROXIMATE MACHINE DIMENSIONS (LxWxH): 6500 x 5300 x 2500 mm APPROXIMATE WEIGHT: 103,000 kg As a manufacturer, technical specifications can be tailored to your requirements.

Condition: new, Year of construction: 2025, functionality: fully functional, total length: 1,370 mm, total width: 1,370 mm, total height: 1,020 mm, overall weight: 360 kg, input voltage: 380 V, warranty duration: 24 months, nominal power: 1.9 kW (2.58 HP), power: 1.9 kW (2.58 HP), workpiece width (max.): 240 mm, workpiece length (max.): 240 mm, ZDV Series - Circular Type Dryers For drying after deburring and polishing Corn granule is used. Various volumes in the range of 125lt - 1650lt Includes seperating system- Resistance heated Drying for all kinds of metal and non-metal materials Caodpfel Sm N Tjx Aflja Suitable for automation system Optional accessories Dryer machines are used to dry the wet surfaces of the parts after the process in surface finishing machines where deburring, polishing, etc. are performed. At the same time, dryer machines help to prevent corrosion of the parts Corn cobs are used in dryer machines. Hot corn cobs absorb water from the surface of the parts during process. The dryer machines have a heating system with resistance. By the help of heating system, the drying speed increases and it saves time and energy. On the machine, there is a material loading point in order to transfer wet parts to the machine easily and a discharge slider which can take out the parts after drying easily. During drying process, the parts and corn cobs move through the ramp in the bowl to the self-discharge way. Activating the slider is enough to take out the dried parts. Thanks to ergonomically designedchassis height and springs, staff can work with high efficiency. Increased resistance against vibrations, rigid and reinforced support construction; adjustable insulators flexibly mounted to absorb vibrations are some of the distinctive design features of the machine chassis. Electrical panels with CE Certificate designed in accordance with EU standards are used. There are main switch and emergency stop switch. The working time controller and time clock are included in the standard equipment. Three-phase electrical connection is used. It can work integrated with automation systems with PLC software. Dust absorbing system is available as an option. The dimensions of the dryer machines are designed to work integrated with the previous processes surface finishing machines. Therefore, the products from the first process are able to be transferred to the material loading point of the dryer automatically.

Condition: new, MGH is Baykal’s Hydraulic Swing-Beam Shearing Machine, engineered for reliable and efficient straight-line cutting of sheet metal. It is ideal for general-purpose shearing applications where simplicity, durability, and low maintenance are essential. MGH series is well-suited for fabrication shops, small-to-medium metal workshops, and industrial manufacturers. Cedpfx Afjwnalvjleaa