Hydraulic guillotine shear

Baykal HNC 8100/6

Condition: excellent (used), functionality: fully functional, TECHNICAL DETAILS General Information Manufacturer: Baykal Type of Machine: Hydraulic Plate Shear Model: HNC 8100/6 Working Area Working Width: 8,100 mm Sheet Thickness: max. 6 mm EQUIPMENT Motorized Back Gauge Guodez R Dwkspfx Ad Roi Automatic Shear Gap Adjustment Automatic Angle Adjustment Sheet Support Device

Condition: good (used), functionality: fully functional, Year of construction: 2015, Four-Roller Plate Rolling Machine Manufacturer: FACCIN Model: 4HEL 2122 Year: 2015 Technical Specifications Brand: FACCIN Model: 4HEL 2122 Year of manufacture: 2015 Working width: 2050 mm Roll geometry: Linear guides Top roll diameter: 225 mm Bottom roll diameter: 210 mm Side roll diameter: 165 mm Bending force against top roll: 100 t Motor power: 9 kW Dimensions (approx.): L 3.50 x W 1.20 x H 1.10 m Weight (approx.): 4,200 kg Performance Rolling capacity (full working width): 12 mm Pre-bending capacity (full working width): 8 mm From tube diameter: 1,125 mm With yield strength: 260 N/mm² Rolling capacity (full working width): 8 mm Pre-bending capacity (full working width): 6 mm From tube diameter: 295 mm With yield strength: 260 N/mm² Gsdpfx Adszguumj Reui Rolling capacity (full working width): 8 mm Pre-bending capacity (full working width): 6 mm From tube diameter: 1,125 mm With yield strength: 360 N/mm² Rolling capacity (full working width): 6.5 mm Pre-bending capacity (full working width): 5 mm From tube diameter: 295 mm With yield strength: 360 N/mm² Rolling capacity (half working width): 15 mm Pre-bending capacity (half working width): 10 mm From tube diameter: 1,125 mm With yield strength: 260 N/mm² Equipment - Double linear guide system for roller movement - Extra wide bearing blocks - MCS double bearing system for roll rotation - Extra heavy-duty, doubly supported drop end bearing - Electronic parallelism system (EPS) - Hardened rolls for maximum wear protection and reduced sheet damage - All rolls polished after heat treatment - SIEMENS S7 PLC touch control - Safety cable with emergency stop and CE certification - Water cooler for hydraulic unit All details without guarantee. A live demonstration under power is possible at any time in our showroom.

Condition: used, Year of construction: 1999, pressure 180 t chamfer lenght 3100 mm distance between columns 2550 mm throat 310 mm stroke 200 mm ajustment speed 80.0 mm/sec working feed 10.0 mm/sec return speed 58.0 mm/sec dayligth 385 mm table width 240 mm work height max. 885 / 1050 mm oil volume 180 ltr. total power requirement 15.0 kW weight of the machine ca. 9850 kg. range L-W-H 4200 x 1750 x 2450 mm from a maintenance workshop Godpfsxab Erex Ad Rjui well-maintained condition (!!) - in checked condition - machine video - ?v=o_t9BBMsNNs Equipment: - simple, conventional electro-hydraulic press brake * with torsion shaft for parallelism of the upper beam - electric back stop, with ball screws (X axis) * with 4x manually adjustable stop fingers * fine adjustment via handwheel at the front, with analog position display - electro-motor adjustment of the immersion depth (Y1 + Y2 axis) * with digital position display - swiveling operation, mounting side on the left - 1x set of upper tools - 1x rotatable MULTI V universal die block - 2x front / movable support arms - 1x freely movable 2-hand foot control - operating instructions (PDF)

Condition: used, machine/vehicle number: 007848, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, Hot Air Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 20 m/min Maximum panel thickness: 60 mm Gujdpfxowkrqpj Ad Rei Operating Units: 8 nr

Condition: new, maximum load weight: 1,438 kg, overall weight: 1,800 kg, axle configuration: 1 axle, loading space length: 3,530 mm, loading space width: 1,840 mm, loading space height: 420 mm, total width: 2,400 mm, total height: 640 mm, Year of construction: 2026, TEMARED Car Transport Trailer Type Car Flat 3518 1,800 kg Gross Vehicle Weight, Payload up to 1,418 kg Shock absorbers for 100 km/h approval? Tilting platform, center area with phenolic resin-coated plywood insert Important Safety Notice Dear customers, We must point out that fraudsters are copying our vehicle listings from our official website and eBay Classifieds, and are offering them on other fraudulent websites at significantly lower prices. Please note: Our advertisements are valid exclusively on the official platforms of our website and eBay Classifieds. Any reposting or listing on other portals is a scam and serves fraudulent purposes. To protect our vehicles from misuse, we do not publish all detailed information in our advertisements. Full information is available only through direct contact with us. If you are seriously interested, we kindly ask you to contact us directly by email or telephone. Thank you for your understanding. Available immediately! Financing available! Delivery possible for an extra charge! Brand new trailer 2 years MOT on first registration, 2 years manufacturer's warranty Specifications: Hot-dip galvanized bolted steel frame Side wall height Steel loading ramps Central floor area covered with phenolic resin-coated plywood 4 pairs of recessed lashing eyes in the floor Tilting platform operated by gas strut Bolted, adjustable wheel chocks Maintenance-free rubber-sprung KNOTT axle 1,800 kg 195/50 R13C tyres on steel rims Shock absorbers for 100 km/h approval Plastic mudguards Hot-dip galvanized V-drawbar KNOTT overrun brake with reverse function, handbrake Jockey wheel 12V lighting system, 13-pin plug Multifunctional lighting Front position lights White/red marker lights at rear 2 wheel chocks with holder Registration documents (registration certificate, COC, 100 km/h manufacturer certificate) The above-mentioned equipment is included in the price. Dimensions: Loading area: 353 x 184 cm (LxW) Deck height: 42 cm Overall length: 548 cm Overall width: 240 cm Overall height: 64 cm Gross weight: 1,800 kg Unladen weight: 382 kg Payload: up to 1,418 kg (depending on equipment) Axle load: 1,800 kg Drawbar load: 100 kg Options Available: Spare wheel with holder + EUR 180.00 Lifting crank + EUR 90.00 Trailer available immediately. Financing on request! Delivery possible for an extra charge! Visit us or call us. Offer price incl. 19% VAT. Inspection Mon-Fri 09:00 - 17:00 Saturday 09:00 - 12:00 Guedexcdlyepfx Ad Roi Offer and further information on request: Office Tel. Subject to prior sale and errors. The provisions of the order confirmation or purchase contract alone are binding. Detailed specification and pricing are available from our sales staff. Please contact us. Please observe the legal regulations regarding weight and speed restrictions.

Condition: good (used), The Bystronic glass cutting line for split band dimensions (Maximum 3300 x 2550 mm) Service/spare parts are provided by Hegla, who purchased Bystronic. 1 Bystronic KTR tilting table, Serial No. E9801016-1, o Tilts with built-in hydraulics, roller drive for automatic glass transport to the cutting table • 1 fully automatic float glass cutting table o Type: XYT 972, Serial No. E980016-2 o Can also be used for shaping, waste optimization, and PC Terra o Maximum dimensions 3300 x 2550 mm Gsdpfjt Et Icex Ad Rsui o Glass thicknesses 2-15 mm o With belt conveyor • 1 breaking table with breaker bars and air cushions o Serial No. E980016-4

Condition: used, Year of construction: 2014, workpiece weight (max.): 25,000 kg, total length: 10,000 mm, total height: 6,000 mm, total width: 10,000 mm, overall weight: 60,000 kg, DÖRRIES SCHARMANN VCE 3000 / 280 CNC Vertical Turning Machine Modernization: as part of the retrofit in 2014 to Siemens SINUMERIK 840D SL Working Area Table Diameter: 2,800 mm Gujdpjzmkzpjfx Ad Roi Max. Swing Diameter / Turning Diameter: 3,000 mm Max. Table Load: 25,000 kg Max. Turning Height: approx. 2,100 mm X-Axis Travel: ±1,550 mm Z-Axis Travel / RAM Stroke: 1,500 mm Main Drive and Spindles Main Drive: Siemens main motor Drive Power: 130 kW Max. Spindle Speed: 4,500 min⁻¹ Operating Mode: S6, 40% Equipment: 2 vertical spindles Tool Changer and Peripherals o    2 automatic tool changers o    Coolant system o    Chip conveyor o    Oil mist extraction o    2 separate hydraulic units Operating Hours: approx. 12,571 hours according to mechanical hour meter Rotation height max.: 2,100 mm Weight approx.: 60,000 kg Dimensions (LxWxH) approx.: 10000 x 10000 x 6000 mm Table diameter: 2,800 mm Control: Siemens SINUMERIK 840D SL Component weight max.: 25,000 kg Swing: 3,000 mm Year of construction: 2,014 Condition: good Terms of payment: 100% prepayment before pick-up Terms of delivery: EXW EX Works under power: No

Condition: used, pressure 50 t chamfer lenght 1500 mm distance between columns 1220 mm Control Cybelec DNC 1200 closing speed 95 mm/min working feed 1-10 mm/sec work stroke 156 mm overrun time 59 ms tracking travel 6 mm throat 200 mm Gedpfx Adsra Rrho Roui distance table - lower edge of ram 301 mm table width 160 mm table height 850 mm x-axis 550 mm travel R-axis +/- 50 Number of axles 3 (Y, X, R) St. weight ca. 3600 kg a lot of lower and upper tools incl. work light new control in 2003: Cybelec DNC 1200

Condition: used, Year of construction: 2007, Technical details: throat: 640 mm round bar steel: stanzen: Ø 26 x 20 mm Punching capacity: 70 t total power requirement: 5,5 kW weight of the machine ca.: 2,0 t dimension machine xH: 2,0 x 1,0 x 1,8 m hydraulic section steel shearing machine shearing station: -shear max. 300 x 20mm / 375 x 15mm -shear cutting max. 150 x 13mm -holding-down device adjustable in length to 630mm profile station: processing of round and square profiles; U-profiles; double T-beams and non-symmetrical angles Guedpfxeu Icmho Ad Rsi Angle/profile cutting -angle steel max. 90° shearing = 150 x 15mm and 45° shearing = 80 x 10mm -U-I profile = 130 x 65mm; T profile = 90 x 12mm -profile cutting max: round steel Ø 45mm and square steel 45mm -knife cutting edges fourfold Punching station: -Punching force 60to -throat 640mm -table WxD = 1000 x 600mm -punching max. Ø x thickness: Ø 26 x 20mm and Ø 57 x 9mm -slot punching D x W x D: 10 x 45 x 90mm -through hole in table Ø 40mm -Equipment: stop bar Al angle 100 x 80 x 1000mm Notching station: -Table W x D 430 x 380mm -notches: material thickness 10mm; width 45mm; depth 60 - 90mm; angle flange 100 x 10mm Punching: -Table 600 x 600mm -throat 625mm -bore max: Ø 57 x 12mm -working stroke 80mm; stroke rate 34 strokes/min; punching pressure 40to -stop angle 200 x 100mm L=600mm Notching station: -Table size 450 x 450mm -notching material thickness 13mm; width 52mm; depth V 90° 70 - 100mm; angle flange 100 x 13mm Please ask for accessories. Operation by foot switch Some accessories available. Please ask. *

Condition: good (used), Year of construction: 1979, functionality: fully functional, machine/vehicle number: 332046, travel distance X-axis: 8,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 2,200 mm, spindle speed (max.): 850 rpm, spindle speed (min.): 6 rpm, feed rate X-axis: 8 m/min, feed rate Y-axis: 6 m/min, feed rate Z-axis: 1 m/min, total width: 10,000 mm, total length: 14,000 mm, total height: 4,500 mm, spindle diameter: 160 mm, table load: 40,000 kg, table length: 3,000 mm, table width: 3,000 mm, workpiece weight (max.): 40,000 kg, overall weight: 71,000 kg, drill spindle length: 1,200 mm, year of last overhaul: 2002, power: 60 kW (81.58 HP), The machine is on stock and ready for use. A combination with 3x3 m TDV5 rotation table enables most demanding machining operations. Machine will be available for inspection under power. Gsdpeuplptsfx Ad Reui