Band Saw - Vertical

BERA BS

Condition: new, Year of construction: 2026, For professional and precise glue supply in dowel holes and back side grooves. Short introduction: • Always the same and right glue amount • No afterwards cleaning of the workpieces of too much glue is necessary • Easiest and minimal cleaning (1x week) of the gluing system (through cleaning program) Hnedpfx Aodxz Tpolbor • Glue cost savings • Ergonomic and light glue gun compared to squeezy glue bottles • Faster and more precise working compared to squeezy glue bottles

Condition: new, Year of construction: 2024, Working width: 600 mm Working height: 150 mm Units: 4 brush units separately adjustable 1st unit, rotor group: group of 5 oscillating rotor brushes, Ø 115, each with a 3 kW motor 2nd unit, rotor group: group of 5 oscillating rotor brushes, Ø 115, each with one 3 kW motor 3rd unit, brush: Scotch Brite Hard / diameter 220mm, Vario drive 4th unit, brush: Scotch Brite Hard / diameter 220mm, Vario drive Hodpfxjug Ty Hs Albenr Height adjustment: electric Height display: digital Control: touchscreen Feed speed: 4 - 12 m/min Motor power feed: 0.37 kW Machine length: Machine width: Weight:

Condition: used, HIGH SPEED DOWEL CROSS-CUT AND CHAMFERING MACHINE LOSER MOD. AA220 - Range of working diameter: 6 - 18 mm - Capacity: about 7,500 - 15,000 dowels/hour Hnedpfxjqpdkce Alber

Year of construction: 2004, condition: ready for operation (used), Max. working width: 1000mm, feed rate: 5-20m/min, height: 2200mm, length: 4000mm, weight: 3.3t, with documentation, was maintained regularly. Hnodoi E Trpjpfx Alber

Condition: good (used), Swivel Spindle Milling Machine, Table Milling Machine, Bench Milling Machine -Spindle adjustment: height and angle -Swivel: -3° to 45° -Drive: 4.5/5.5 kW -Speed: 3000/4500/6000/9000/12000 rpm Hnsdpfx Aljh Nvyzjber -Feed apparatus Holz-Her 3 rolls -Useful shaft length: 100 mm -Spindle: Ø 30 mm -Max. Milling cutter: Ø 220 mm -Dimensions: 1540/1100/H1520 mm -Weight: 962 kg

Year of construction: 2004, condition: excellent (used), Four-side planer Hnedpohlp D Nsfx Albor -max. planing width 23cm -max planing height 16cm -2 pulling rollers in the table -chromed table - smooth regulation of the feed speed -2 pulleys from the top in front of the lower head, additionally a roller apparatus for short elements - 4 spindles: lower 5.5kW, right 5.5kW, left 5.5kW, upper 7.5kw The machine is in very good condition, little used, with spiral heads on the bottom right and left, with a Terssa knife head on the top.

Condition: excellent (used), belt driven Flow rate 14500 m3/h Negative pressure 3091 Pa Motor power 22 kW Speed ​​2340 rpm Suction DM 500 mm Outlet DM 400 x 500 mm Hnjdpfx Aoh Tfqhjlbor Dimensions L x W x H = 1800 x 1300 x 1250 mm Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: new, Year of construction: 2026, CORMAK PT310 Planer Thicknesser The CORMAK PT310 planer thicknesser is an advanced woodworking machine combining the functions of a surface planer and a thickness planer in one robust construction. It stands out with exceptional stability, high working power, and solutions designed to improve accuracy and operator comfort. It is a reliable tool for professionals who expect efficiency, durability, and repeatable precision when working with both hard and soft wood. Main advantages of the machine Powerful motor S6: 4.2 kW (S1: 3.0 kW) – one of the most powerful units in its class, ensuring stable performance even under heavy loads. Stable construction with a weight of 250 kg – rigid cast iron tables and additional rubber feet minimize vibration and improve machining accuracy. Quick change between operating modes – fast conversion from surface planer to thickness planer by lifting the tables and repositioning the chip extraction cover. High operating comfort – low noise emission and precise material guidance ensure comfortable and safe operation. Efficient dust extraction system – Ø120 mm extraction connection enables effective chip removal, especially during intensive use. Design and technology The PT310 is built on a massive frame with ground cast iron working tables, ensuring long service life and excellent rigidity. The main control elements, including the thickness planer table height adjustment wheel, are ergonomically positioned on the right side of the machine. The tilting fence with a clear scale allows precise adjustment from 90° to 45°. Thanks to the solid guiding column of the thickness planer table, the machine provides repeatable accuracy across the entire working width. Precision and working efficiency The Ø75 mm cutter shaft equipped with three HSS knives measuring 310 × 25 × 3 mm rotates at 5500 rpm, allowing perfectly smooth surface finishing. The maximum planing width is 310 mm, while the thicknessing height range is 5–225 mm. The 6 m/min feed speed enables efficient processing of larger workpieces. The maximum cutting depth in surface planing mode reaches 4 mm, significantly reducing material preparation time. Applications Carpentry and furniture workshops – for everyday efficient processing of solid wood and glued panels. Production of structural elements – ideal for leveling and calibrating construction components, stairs, frames, and moldings. Technical schools and training workshops Standard equipment Three HSS knives, dimensions 310 × 25 × 3 mm Cutter head guard Cast iron surface planer tables Ø100 mm dust extraction outlet Feed switch and emergency STOP switch Polish-language operating manual (DTR) CE declaration of conformity Hnodsvxh Rvepfx Alber Technical specifications Cutter shaft diameter 75 mm Cutter shaft speed 5500 rpm Dust extraction outlet diameter 100 mm Tilting fence angle range 90–45° Number of knives / dimensions 3 / 310 × 25 × 3 mm Maximum surface planing width 310 mm Maximum thickness planing width 308 mm Maximum planing height 5–225 mm Maximum thickness planing cutting depth 2.5 mm Maximum surface planing cutting depth 4 mm Thickness planer feed speed 6 m/min Surface planer table dimensions (L × W) 1300 × 310 mm Gross weight 250 kg Motor speed 2800 rpm Motor power S1: 3.0 kW / S6: 4.2 kW Power supply 400 V, 5-pin socket, 16 A Operating manual (DTR) Included CE declaration Yes

Condition: good (used), Table milling machine, table milling machine -Table milling machine: with rigid spindle -Speeds: rpm -Motor power: kW Hsdpocl Svvsfx Albonr -Dimensions: 1000/1870/H1040 mm -Weight: 560 kg

Condition: used, functionality: fully functional, spindle bore: 65 mm, turning diameter over bed slide: 520 mm, Lead and feed screw lathe Manufacturer: Heidenreich & Harbeck, Model: VDF Technical data Brand: Heidenreich & Harbeck Model: VDF Year of manufacture: unknown Control: conventional Centre distance: 1,500 mm Swing over bed: 520 mm Spindle bore: 65 mm Dimensions: L 3.60 x W 1.20 x H 1.50 m Machine weight: approx. 4 t Equipment - 2-axis digital readout - 1,500 mm scale not included Hjdpfx Aloy A H Akjbenr All data without guarantee. A powered demonstration can be arranged at any time in our exhibition hall.