Portal vacuum press

BESSLER HOLZFRAESE Portal Vakuumpresse 4021

Year of construction: 2013, condition: good (used), functionality: fully functional, For coating / lamination of curved and contoured workpieces Dkjdpfx Abex Dayioujh Press frame internal dimensions: 2,880 x 1,280 mm Vacuum pump: 25 m³ with vacuum buffer tank Movable on castors Tilting press table Vacuum pump motor: 0.75 kW Vacuum regulator with digital display

Year of construction: 2018, condition: excellent (used), functionality: fully functional, Wemhöner VARIOPRESS Vacuum Membrane Press Basic 1000 S Technical Specifications: Heating platen size (mm): 2850 x 1550 Electric heating platen design: Aluminum, top heating platen Total pressing force (kN): 2400 Max. chamber pressure (bar): 6 Dkjdpfx Aov Np H Hebueh Max. operating temperature: 180 degrees Celsius Max. batch or workpiece size (mm): approx. 2460 x 1180 Thermoplastic film in roll form: Film width: approx. 1430 mm Film thickness (mm): approx. 0.25 - 1 Pressure chamber height (mm): max. up to 180 Connected loads: Installed power (kW): approx. 46 Required air pressure (bar): approx. 8

Condition: new, Year of construction: 2025, working table size: 3000 mm x 1500 mm emergency stop switch: no operational vacuum: -0,85 bar vacuum pump output: 40 m³/h pump capacity: 1,5 kW noise level: 70 Db heating system temperatur: max. 200 °C heating system: 16 kW machine length: 3100 mm machine width: 1650 mm machine height: 1100 mm Dksdpfxji Hplks Abush weight: 850 kg

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Vacuum membrane press ARTEX VPS - 300 350x150 Dkedpfx Ajtp Td Tjbueh TECHNICAL DATA - dimensions of working table length/width 3500x1500mm - working temperature ±40-60°C - maximum temperature ±80°C - additional heating with air - power of heaters - 3×1,5kW 4,5kW - power of vacuum pump 0,75kW - capacity of vacuum pump 25m3/h - noise level 67dB - dimensions L/W/H 3900x1800x1400mm - weight about 550kg

Condition: reconditioned (used), Year of construction: 1993, functionality: fully functional, machine/vehicle number: 869/9-302, Connected load 380V 21A Djdeiamufopfx Abuskh Edge magazine gluing station 1906 printing unit 1914 Crosscut saw unit 1976 Milling unit rounding 1943 Rounding scraper 1927 Buffing unit 1944 Control panel top Suction nozzle D=100 mm operating instructions no exchange unit for flush milling

Condition: used, Year of construction: 2011, Base Machine M800 X5 TV 1 WORKING RANGE X: 5,020 mm Y: 1,830 mm Z: 675 mm Clearance Height: 300 mm (from 50 mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic construction made from thick-walled steel. It is reinforced across the entire machine bed with welded components, providing exceptional stability. The table design, with its large base, is the key to ensuring lasting precision and stability. The machine’s layout enables the operator to achieve optimal workflow with minimal space requirements. The mobile gantry is built as a solid monoblock. It is positioned in the X direction on prismatic, ground guides with recirculating ball carriages. The machining unit is mounted on this mobile support carriage, also on prismatic, ground guides and recirculating ball carriages. AXIS MOVEMENT All axes travel on prismatic linear guides with large cross-section and recirculating ball shoes with a wide contact surface, which ensures optimal sliding, even at high speeds and accelerations. The precise and fast positioning of the movable gantry (X-axis) is achieved via helical rack and pinion. Large cross-section recirculating ball screws ensure accurate positioning of the machining unit along the movable gantry (Y and Z axes). The perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors. Max. axis speeds: · X-axis = 90 m/min · Y-axis = 90 m/min · Z-axis = 30 m/min Safety device with bumper and light barrier 1 Bumpers with sensors are fitted to the movable upright, and a light barrier system is installed at the front of the machine. If the operator enters the active zone, the X-axis travel speed is reduced to a lower value of 25 m/min without stopping the machine. This system allows parts to be loaded during pendulum operation without the limitation of access areas, as seen with pressure mat systems. This prevents unwanted interruptions in the machining cycle and offers greater freedom of movement around the worktable. CE certification for the safety system 1 Safety protection fence 1 Side and rear protection fence Automatic central lubrication controlled via CNC 1 The lubrication of the X, Y, and Z axes is controlled by the CNC; intervals are regulated automatically, without manual intervention. Central extraction connector 1 All individual extraction connections of the machining units are collected into a central extraction port. Inside the port, there are various slider valves controlled by the NC. This reduces the required extraction air volume. Chip conveyor 1 Maxi – 5-axis electrospindle 11 kW HSK-63 “Prisma K 1 5-axis electrospindle, 11 kW at 20,000 rpm S1 (100% duty cycle) Speed: max. 20,000 rpm Rotation direction: left/right Liquid cooling Tool interface HSK 63F Inverter 18 kW, stepless, smooth power delivery Max. rotation B-axis = 200° (+-100°) C-axis = 650° Thanks to the non-orthogonal axes, it is possible to perform complex horizontal positioning in a small workspace. This enables the machining of complex geometries without the risk of collision. Dsdpfxjxy Tmno Abuskh

Year of construction: 1988, condition: used, - working length max. (mm): 3100 - profile height max. (mm): 200 Dksdpfskx Hpaex Abujh

Year of construction: 2025, condition: new, Dimensions (L/W/H) 2920x980x1450 mm Dksdpfx Abovz Hzrjuoh Weight 1500 kg Total power requirement 11,5 kw

Condition: ready for operation (used), Year of construction: 2015, General Data Measurements width 1800 Measurements depth 3450 mm Measurements height 950 mm Table Table load 200 kg This BARTH VMPH 3013 laminating press was manufactured in 2015. It features dimensions of 3450 x 1800 x 950 mm and a clamping area of 3000 x 1320 mm. The vacuum table supports up to 200 kg with a maximum vacuum pressure of -0.95 bar. It operates on 400 VAC/50 Hz with a connected load of 12 kVA. Consider the opportunity to buy this BARTH VMPH 3013 laminating press. Contact us for more information about this machine. Dkedex Nr Ufepfx Abuoh Application Types Pressing / Laminating

Condition: good (used), Year of construction: 2012, functionality: fully functional, TECHNICAL DETAILS Area of application: bottling of water without CO₂ Installation location: mineral water factory in France Performance and capacity Max. performance: 32,000 bottles per hour Bottle size: 1.5 l Suitable mouth: 29/25 Capping system Capping machine: Zalkin Number of closing elements: 18 Dedpfev Iqpasx Abuokh Capping holder: pick-and-place system Capping feed: yes Enclosure: yes Working direction Operating direction: clockwise (left to right)