HSD PE 106 MODULE

BIESSE

Condition: used, Year of construction: 2013, power: 17.1 kW (23.25 HP), number of axes: 4, working width: 1,320 mm, milling spindle speed (max.): 24,000 rpm, working length: 2,500 mm, TECHNICAL DETAILS Working area, X-axis: 2,500 mm Working area, Y-axis: 1,320 mm Travel, Y-axis: 1,900 mm Max. panel thickness: 170 mm Work table: Cantilever and rail table Number of controlled axes: 4 Travel speed, X-axis: 80 m/min Travel speed, Y-axis: 80 m/min Travel speed, Z-axis: 20 m/min Drilling unit Number of drilling units: 1 Position of drilling unit: top Vertical drilling spindles: 10 Horizontal drilling spindles, X-direction: 4 Horizontal drilling spindles, Y-direction: 2 Total number of drilling spindles: 16 Milling spindle Number of milling spindles: 1 Position of milling spindle: top Controlled axes: 4 Automatic tool changer: yes Motor power: 13 kW Speed: 24,000 rpm Grooving unit Number of grooving units: 1 Position of grooving unit: top Design: fixed, for grooving in the X-direction Max. tool diameter: 120 mm Motor power: 1.7 kW Speed: 7,500 rpm Number of tool magazines: 2 Tool magazine, rear: 12 slots Tool magazine, side: 10 slots Total number of tool change slots: 22 MACHINE DETAILS Machine programming software: BiesseWorks Gksdpfx Aqezmtlkjija Number of vacuum pumps: 1 Suction capacity per pump: 90 m³/h Total connected load: 17.1 kW EQUIPMENT CE marking Protective structure for machining units with safety sensors Safety system: front safety mats 4 consoles with suction cups for workpiece clamping 1 drilling unit, top 1 milling spindle, top 1 fixed grooving unit, top, for grooves in the X-direction 1 rear tool magazine with 12 slots 1 side tool magazine with 10 slots 1 vacuum pump Front safety mats The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8359

Condition: ready for operation (used), Year of construction: 2008, Edgebander manufactured in 2008. This BIESSE Edge Stream B1 features a comprehensive set of tools including a PU-gluing machine, pre-milling unit, edge trimmer, and fine milling unit. It also includes rounding and edge scraper units, along with swaying brushes and an edge heater. If you are looking to get high-quality edging capabilities, consider the BIESSE Edge Stream B1 machine we have for sale. Contact us for further details. • Liquid spray unit (ADZ) • Pre-milling unit (RT) • PU gluing unit (SP10, Nordson) • Edge trimmer (IT90) • Balance tool trimmer (RS10) • Fine milling unit (RF40) • Rounding unit (AR60) Gjdpozuhd Refx Aqiska • Edge scraper (RB40) • Glue scraper unit (RC20) • Swaying brushes • Edge heater (PH10)

Condition: ready for operation (used), Year of construction: 2016, overall weight: 1,870 kg, Edgebander manufactured in 2016. This BIESSE Akron 1440 A features a pre-milling unit, multifunction milling units, flat trimming, and a corner rounding unit. It also includes automatic glue application, motorized adjustment of units, and a touchscreen control for ease of use. If you are looking to get high-quality edgebanding capabilities, consider the BIESSE Akron 1440 A machine we have for sale. Contact us for further details. Technical Data: • Model: BIESSE Akron 1440 A • Year: 2016 • Working hours: approx. 4,200 h • Power: 13 kW • Power supply: 380 V, 50 Hz, 3 / N / PE • Full-load current: 24 A • Air pressure requirement: 7 bar • Weight: approx. 1,870 kgWorking Capacity: • Feed speed: 8 / 12 / 15 / 18 m/min • Workpiece thickness: 10–60 mm • Edge thickness: coil 0.4–3 mm, strip up to 12 mm • Edge height: 14–64 mm • Minimum panel length: 140 mm • Minimum panel width: 50 mmInstalled Units / Equipment: • Automatic glue application unit • Pre-milling unit • Multifunction milling units R1 + R2 • Flat trimming unit • Corner rounding unit (Rondomat) • Radius profile scrapers • Flat scrapers Gkjdpfozug Smex Aqiea • Polishing brushes • Cleaning liquid application unit • Motorized adjustment of units • Touchscreen control • IntelliSet system • FAST setting technology • ECO modeAdditional Information:The transport chain / output conveyor for finished panels is not included in the offer includes the machine only.Availability:The machine is currently in daily production and can be inspected under power. Inspection and testing are possible by prior appointment.Available for collection from the beginning of September 2026.

Condition: ready for operation (used), Year of construction: 2020, travel distance X-axis: 3,765 mm, travel distance Y-axis: 1,560 mm, travel distance Z-axis: 378 mm, number of axes: 3, spindle motor power: 13,200 W, spindle speed (max.): 24,000 rpm, This 5-axis BIESSE Rover PLAST A FT 1536 was manufactured in 2020, featuring a robust electro-welded base and high-precision movement systems. It boasts a main electrospindle power of 13.2 kW, a programmable rotation speed up to 24,000 RPM, and an 8-position revolver tool magazine. Ideal for intricate woodworking, it includes a 21.5" LCD monitor and Industry 4.0 integration. Consider the opportunity to buy this BIESSE Rover PLAST A FT 1536 CNC Wood Machining Centre. Contact us for more information. • Maximum piece clearance: 170 mm • Axis speeds: X 85 m/min, Y 60 m/min, Z 20 m/min • Base: Electro-welded closed-circuit structure with high-thickness steel plates • Axis drives: X with two independent brushless motors and helical rack & pinion; Z with preloaded ballscrew, ISO5 precision • Work table: Phenolic laminate with 30 mm grid vacuum system; vacuum steps every 150 mm; M8 threaded inserts for templates/fixtures • Main electrospindle: 13.2 kW (17.7 HP), HSK F63, air-cooled, 1,000–24,000 rpm • Tool magazine: 8-position revolver on Y-carriage; max tool diameter 110 mm; max tool weight 7.5 kg (32 kg total magazine) • Tool measurement: Digital presetter for tool length measurement up to 130 mm diameter • Control system: BH660 PC-based with Windows Real Time (WRT); CPU Intel Core i5 or better; 8 GB RAM; 128 GB SSD or better; 21.5" LCD monitor • Power supply: 380/400/415 V, 50/60 Hz Gjdpjzug N Sefx Aqiska • Automatic lubrication system for moving parts • Software: bSolid 3D CAD-CAM for design, simulation, and process management • Connectivity: Industry 4.0 integration via TCP/IP and OPC-UA Additional equipment • Vacuum pump: 250 m³/h, dry-running • Air conditioner for the electrical cabinet • Safety guarding: 2 m high protection nets and front vertical photocells

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 2,400 mm, travel distance Y-axis: 1,200 mm, number of axes: 3, overall weight: 1,700 kg, spindle speed (max.): 24,000 rpm, This 3-axis BIESSE ROVER J FT 1224 was manufactured in 2017, featuring a working area of 2400 mm by 1200 mm. It includes a CNC electrospindle with a maximum speed of 24,000 rpm, and a flat vacuum table ideal for routing, drilling, and panel machining. Consider the opportunity to buy this BIESSE ROVER J FT 1224 CNC Wood Machining Centre. Contact us for more information about this machine. • Axes: 3 CNC-controlled (X, Y, Z) • Capabilities: routing, drilling, pocketing, panel machining • Air supply: 7.5 bar • Suction air speed: 30 m/s Additional equipment • Flat vacuum table with suction cups Gjdjzug N Eepfx Aqioka

Condition: ready for operation (used), Year of construction: 2022, This BIESSE Selco WNT 630 panel saw was manufactured in 2022. It features a maximum cutting length of 3800 mm, saw blade projection of 108 mm, and a lift table capacity of 5 tons. Ideal for handling large panels up to 3660 x 2200 mm. If you are looking to get high-quality cutting capabilities, consider the BIESSE Selco WNT 630 machine we have for sale. Contact us for more information. • Working size: 3800 x 2200 mm • Max cutting length: 3800 mm • Saw blade projection: 108 mm • Max gripper opening: 100 mm • Min panel size: 1830 x 915 mm • Max panel size: 3660 x 2200 mm • Max packet height: 630 mm • Condition: Almost new, used only a few months Additional equipment • Back lift table: • Minimum panel thickness on lift table: 10 mm • Maximum lift: 985 mm • Lift table capacity: 5 t Godpszug E Hofx Aqioka

Year of construction: 2014, condition: ready for operation (used), spindle motor power: 4,000 W, spindle speed (max.): 15,000 rpm, number of axes: 3, This 3-axis BIESSE Skipper v31 was manufactured in 2014. It features a powerful 12 kW machine with a main spindle speed of 15,000 rpm. The machine is equipped with 16 drilling spindles (6 horizontal and 10 vertical) and a grooving blade, allowing for versatile drilling and milling capabilities. If you are looking to get high-quality wood boring capabilities, consider the BIESSE Skipper v31 machine we have for sale. Contact us for further details. • Quantity available: 2 units • Machining type: Drilling and milling • Drilling spindles: 16 total (10 vertical, 6 horizontal) + grooving blade • Maximum workpiece size: X 2500 mm, Y 900 mm • Axis travel speeds: X 25 m/min, Y 50 m/min, Z 25 m/min • Electrical/power: 12 kW installed power; 415 VAC; 21 A Gsdpfxjzug Die Aqioka

Condition: ready for operation (used), Year of construction: 2021, total width: 5,851 mm, travel distance X-axis: 3,140 mm, travel distance Y-axis: 1,260 mm, travel distance Z-axis: 245 mm, overall weight: 3,000 kg, controller manufacturer: BIESSE, controller model: HH660 PC-based control, spindle motor power: 13,200 W, product length (max.): 7,116 mm, spindle speed (max.): 24,000 rpm, number of axes: 4, This 4-axis BIESSE Rover A 1232 was manufactured in 2021. It features a working area of 3140 mm in the X-axis, 1260 mm in the Y-axis, and a Z-axis travel of 245 mm. The machine is equipped with an electrospindle power of 13.2 kW and a maximum tool diameter of 113 mm. If you are looking to get high-quality CNC routing capabilities, consider the BIESSE Rover A 1232 machine we have for sale. Contact us for further details. • Power supply voltage 400 VAC • Full load current 31.7 A • Number of power supply phases 3 • Installed power 18.66 kW • Frequency 50 Hz Gkjdpfx Aqjzugwpjiea • Short circuit protection rating 10 kA RMS Sym • Working area X 3140 mm • Working area Y 1260 mm • Working area Z 245 mm • Max panel thickness: depends on vacuum module height (H74 / H29) and tooling • Workpiece support length 1200 mm • Vacuum pump capacity 90 m³/h • Vacuum pump capacity 108 m³/h at 60 Hz • Vacuum system dry pump • Electrospindle power 13.2 kW • Electrospindle speed 12000 to 15000 rpm S1 • Electrospindle speed 12000 to 24000 rpm programmable • Tool holder HSK F63 • Rotation clockwise and counterclockwise • Two separate magazines installed: • 8-position tool magazine (rear / Y-axis area) • 13-position tool magazine (main X-axis unit) • Maximum tool diameter 113 mm • Maximum tool length 110 mm • Maximum tool weight 7.5 kg • Maximum total magazine weight 32 kg • Vacuum system:Configurable vacuum pump system. Available configurations include:– 2 × 90 m³/h– 2 × 100 m³/h– 1 × 250 m³/h

Condition: ready for operation (used), Year of construction: 2006, table width: 1,520 mm, table length: 6,200 mm, travel distance X-axis: 6,821 mm, travel distance Y-axis: 1,963 mm, travel distance Z-axis: 663 mm, controller manufacturer: BIESSE, controller model: XP600 PC-based control with Windows XP WRT, spindle motor power: 9,000 W, spindle speed (max.): 22,000 rpm, number of slots in tool magazine: 22, number of axes: 5, This 5-axis BIESSE Rover C 9.65 was manufactured in 2006. It features a working area of 6200 mm in X and up to 1935 mm in Y, with a Z-axis travel of 663 mm. The machine is equipped with a powerful 8 kW spindle and a tool changer with 22 positions. If you are looking to get high-quality CNC routing capabilities, consider the BIESSE Rover C 9.65 machine we have for sale. Contact us for further details. Gjdezugvropfx Aqijka • Drive system X-axis: rack and pinion • Drive system Y-axis: ball screw • Drive system Z-axis: ball screw • Guide system: linear guides with recirculating ball bearing blocks • Motors: brushless motors with digital drives • Programming formats: DXF and CID3 • Main spindle type: 5 interpolating axes machining unit • Spindle power S1: 8 kW at 12000 rpm • Spindle power S6: 9 kW at 12000 rpm • Maximum spindle speed: 22000 rpm • Tool interface: HSK F63 • C-axis rotation: 360° continuous • C-axis speed: 13.5 rpm • B-axis rotation: ±100° (positioning) / ±98° (interpolation) • B-axis speed: 13.5 rpm • Z-axis feed speed: 30 m/min • Vacuum system: multi-zone vacuum with connections on both sides • Vacuum pump capacity: 250 m³/h (50 Hz) / 300 m³/h (60 Hz) • Worktable: ATS system with modular supports • Number of workpiece supports: 10 • Number of module carriers: 40 • Module size: 132 x 132 x H41.5 mm • Vacuum module size: 132 x 146 x H74 mm / 132 x 54 x H74 mm • Total module height: 115.5 mm • Clamping system: vacuum and pneumatic (Uniclamp optional) • Clamping force Uniclamp: 220 kg at 7 bar • Minimum workpiece length (Uniclamp): 140 mm • Drilling unit: BH 42 L • Vertical drilling spindles: 29 • Horizontal drilling spindles: 6 (double output) • Grooving saw diameter: 120 mm • Drilling spindle speed: up to 6000 rpm • Tool changer: chain type • Tool changer capacity: 22 positions • Tool spacing: 180 mm • Max tool diameter (full load): 175 mm • Max tool diameter (single): 250 mm • Max tool length: 268 mm • Max tool weight: 7.5 kg • Total tool weight: 100 kg • Pick-up tool changer: 1 position • Max tool weight pick-up: 8 kg • Electrical supply: 380/400/415 V 50/60 Hz • Inverter for spindle: up to 14 kW • Cooling system: liquid cooling unit for electrospindles (1600 W) • Lubrication system: automatic centralized lubrication • Safety system: CE compliant with safety mats, guards and emergency stops • Chip removal: integrated chip conveyorIn 2023, the machine received a new 5-axis spindle head HS552 A HD 0S2 + ES360 F63 9 kW

Condition: used, Year of construction: 2011, total height: 2,550 mm, total length: 5,600 mm, total width: 2,250 mm, Colour: Green Empty weight: 2.500 kg - Year: 2011 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 65352 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 3 - Type milling table: Flat table - Tool holder: ISO30 - Material clamp system: Pneumatic - Drilling unit present: Yes - └ Motor power [kW]: 1.7 - └ Vertical drilling spindles [pcs.]: 10 - Tool changer positions [pcs.]: 12 - System/software: BiesseWorks - Safety feature: Safety mat - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Busch - └ Type: MM1322AVM - └ Capacity [m³/h]: 360 - └ Connection diameter [mm]: 60 - └ Vacuum pressure [bar]: 0 - └ Oil free: Yes - Tools included: Yes - Table length [mm]: 3750 - Table width [mm]: 1560 - Working range X [mm]: 3765 - Working range Y [mm]: 1585 - Z-axis working range [mm]: 170 - Z-axis maximum stroke [mm]: 324 - Installed length [mm]: 6465 - Installed width [mm]: 4794 - Installed height [mm]: 2550 - Transport dimensions: 5600mm x 2250mm x 2550mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Gksdpfszuazusx Aqiea Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets