CNC Wood Machining Centre

BIESSE Rover PLAST A FT 1536

Condition: like new (used), functionality: fully functional, power: 4 kW (5.44 HP), fuel type: electric, color: silver, overall weight: 2,460 kg, mast type: telescopic, Year of construction: 2022, operating hours: 21 h, machine/vehicle number: 0943, Small, compact, and maneuverable: these are the key advantages of our 2.5-ton electric mobile crane. However, there is no doubt that it is capable of handling “big” tasks, as the crane delivers full performance with a maximum lifting capacity of 2,500 kilograms. Lrsdpfx Aew S Ii Nsbvei The 2.5-ton electric mobile crane comes standard with non-marking tires that do not leave chalk residues. The crane's 2 kW electric motor offers precise control and, thanks to a powerful 24 V, 420 Ah battery, can operate for up to 8 hours without needing to be recharged. The telescopic boom extends proportionally and can be further extended with a jib on request. JMG MC 25S - Capacity 2,500 kg - Net weight 2,460 kg - Width 900 mm - Height 1,600 mm - Drive Electric - Power output 4 kW - Tires Solideal Magnum - Hydraulic winch - Telescopic boom - Counterweights - Battery 24 V 420 Ah - Automatic braking system - Front-wheel drive - 2 gear stages - Radio remote control - Manual boom extension - Electronic load monitoring - Boom angle +60° / -15° - Ground clearance 70 mm - Tires - front 18 x 7-8 - Tires - rear 15 x 4.5-8 - Operating manual - Electric motors - Insulation class H

Condition: new, Best price Ljdpsdnxydofx Abvjri 4499 Eur (EXW Jonava, Lithuania) Dimension of sliding table- 2200x375mm Gross cut capacity- 1500mm Width of cut between saw blade and rip fence - 1140mm Saw blade diameter - 400mm Height of cut (90°) - 115mm Height of cut (45°)- 105mm Speed of main saw spindle - 4500/6000rpm Main spindle diameter - 30mm Tilting saw blade - 0-45º Saws lifting, up and down, electrical control. Main motor - 5,5 kW Scoring saw blade diameter - 120mm Speed of scoring saw blade - 7000-8000rpm Scoring saw diameter - 20mm Scoring motor - 1,1 kW Weight: 700 kg * Using the blade 400mm, the smaller should be removed. Reduced saw blade should be used with not more than 350 mm main shield.

Condition: good (used), Plant: REWA Chamber Filter Press used Type: 470-15-25K-HP Design: side rail guided Filter plate format: 470x470 mm Number of plates: 15 Filter plates: PP Lrodpjqakbrjfx Abvei Filter cloths: optionally available in coordination with the medium Press capacity: approx. 57 dm3 Filter pressure: approx. 15 bar Material of parts in contact with the product: Flange, feed-throughs stainless steel, PP or rubberized Material of parts not in contact with the product: Stainless steel Purchase or hire: Inspections of the systems by arrangement at our factory. Other: We can supply you with used equipment ready for operation or refurbished according to your wishes and requirements. Would you like to rent or buy this system? Please contact us, we are at your disposal.

Condition: new, Year of construction: 2022, New machine Year of manufacture: 2022 Standard Equipment: - Electrically powered height and tilt adjustment (0–46°) with automatic correction of cutting height during tilting - Eye-level, swiveling control panel - Double roller carriage, carriage length 3,000 mm - Manually adjustable rip fence with scale, including manual fine adjustment, max cutting width 1,000 mm - Crosscut fence with fixed 90° position, manually adjustable via scale up to 3,200 mm - Max saw blade projection: 150 mm - Max saw blade diameter: 450 mm - Drive power: 4 kW (5.5 HP) at 4,000 rpm - AKE main saw blade clamping system - Working height: 91 cm Motor 5.5 kW (7.5 HP) with VARIO F45: - Stepless speed control from 2,000–6,000 rpm - Precise speed adjustment to the material increases cutting quality and blade service life Extended Cutting Height for Single-Side Tilting: - This option enables single-side tilting with a large extraction hood for max blade Ø 550 mm and a blade projection of up to 204 mm - In combination with a scoring unit: max blade Ø 500 mm / max cutting height 179 mm - Only available in conjunction with at least 5.5 kW (7.5 HP) drive power Lredpew I Uxcjfx Abvji 2-axis Scoring Unit for Tilting: - With motorized height and lateral adjustment, programmable scoring blade height with quick lowering and raising - Drive motor 0.75 kW (1 HP), 8,200 rpm - Retrofitting only possible on machines prepared for the scoring unit LED Lighting: - Highly energy-efficient LED technology for clear marking of the scoring area The Altendorf double roller carriage is renowned for its smooth operation and precision run. It can be locked steplessly in any position. The large double rollers, precision-manufactured from hardened steel, ensure the upper carriage remains absolutely accurate in conjunction with the lower carriage on the hard-chromed guide bars. This running quality is maintained even after decades of heavy use and exposure to dirt. The carriage construction features a highly rigid, torsion-resistant multi-chamber design. The table surface is finely planed and anodized. A hard-chromed round bar in the upper carriage serves as both the mount for the cross-slide and the interface for various accessories. The entire unit is low-maintenance and does not require lubrication. On/Off Switch on Double Roller Carriage: - The on/off switch on the double roller carriage is always within easy reach. With four buttons, both the main saw blade and the scorer can be switched on and off, saving time and increasing safety. Angle/Mitre Fence, Crosscutting up to 3,500 mm: - This Altendorf-patented fence with integrated length compensation makes it easier to cut angles and mitres precisely in a single operation. In both positions, the swivel angle is steplessly adjustable by up to 49° and displayed on a scale. The play-free and robust stop flaps can easily be moved and adjusted as a single flap over the entire area up to max. 3,500 mm.

Condition: excellent (used), Year of construction: 1995, Max. panel width 4400 mm Max. panel length 4300 mm Main saw blade projection 110 mm No of Grippers 8 Front Loading Beam Panel Saws Max. saw blade projection 110 mm Front support tables Ledpfx Absmt Hhwovori no. tables 4 Control system NC 410 Safety standard CE mark Total installed power 20 KW

Condition: excellent (used), Weinig four-sided planer max planing width 230mm max planing height 120mm 5 heads, bottom-5,5KW; left and right-11KW, top-11KW, bottom-5,5KW feed - 4KW fully adjustable heads Lredpfx Ajrigxyobvei electrically adjustable up and down and planing width 40mm spindles feed on gimbal rollers, with smooth adjustment WEINIG brand solid planer, length of the machine 415cm machine checked in original condition

Condition: used, machine/vehicle number: 007289, X axis working area: 3200 mm Y axis working area: 900 mm Main Electrospindle power: 4.5 KW Lodpfx Ajwukyqsbvjri Number of controlled axes: 3 axes Total number of drilling spindles: 16

Condition: used, Year of construction: 2015, Numerical Control NC 1000 Software Biesse Works Working field in X axis 4300 mm Working field in Y axis 2205 mm FT nesting full plane worktable Automatic loading system with side lifting table Automatic labeling machine for barcode printing Automatic printing and application system of adhesive labels N ° 1 vertical electrospindle, with automatic tool change, HSK F63 Blade unit integrated in the drilling head on X axis - diam. 120 mm Blade unit integrated in the drilling head on Y axis - diam. 120 mm Automatic tool change system with 8 positions - positioned on the machine operating head Automatic tool change system with 21 positions - positioned on the rear of the machine with chain BH 20 boring head with independent spindles arranged as follows: - N ° 8 vertical in X axis - N ° 8 vertical in Y axis - N ° 4 horizontal in X axis - N ° 4 horizontal in Y axis Automatic unloading system with motorized belt Front protection and safety system with carpets and perimeter nets Automatic lubrication system Air conditioning system for the electrical panel Vacuum pumps Lrsdpfxswt Snyj Abvji

Condition: used, Technical details: turning diameter over bed: 560 mm turning diameter over support: 280 mm turning length: 2000 mm centre height: 280 mm centre distance: 1600 mm spindle bore of work spindle: 65 mm range of revolution per miute: 9...1800 / 24 step U/min longitudinal feeds:: 0,025-0,09 mm/U cross feed: 0,012-0,045 mm/U tailstock quill adjustment:: 225 mm tailstock taper MT: MK5 total power requirement: 18 kW weight of the machine ca.: 3,8 t Lredpfx Aewa I Shobvoi dimension machine xH: 3,7 x 1,6 x 2,05 m Three-jaw chuck D=320mm Top slide rotatable 45 degrees right and left *

Condition: used, • Load capacity 350 kg • 6 vacuum suction cups, 250 mm diameter, adjustable • Vacuum lifter can rotate 90° and tilt 90° • Suction cups with guide tube and electric trolley • 4 units available, brand new and unused • Immediately available IV: + Design Standards 1. The construction of the unit strictly complies with European CE standard EN13155:2016, American ASME (Mechanical Engineering Association) B30-20-2006, and German UVVI8 regulations. The key design parameters exceed the requirements of the aforementioned standards. 2. Safety factor: The main structure features a factor of 4.0, vacuum safety level is 65%, and the standard safety level is 85%, which is 20% above the standard safety requirement. V+ Equipment Inspection and Standards 1. General Check that all materials are complete, inspect if the equipment exterior is painted or scratched, check for damage to the suction cups and pipes. 2. Pre-shipment Inspection © Equipment suction test © Equipment pressure holding test Ljdpfxsxnvq Ej Abvsri © Alarm system test © Various control components • Price on request