Stamping- and forming machine

BIHLER GRM 80

Condition: used, Engine and transmission for GRM 80 – according to the previous owner, the transmission was overhauled and has not been used since. ATTENTION!! This offer includes only the engine and transmission! Gkedpfxszw I Hqe Akhsd

Year of construction: 1985, condition: reconditioned (used), Technical Details : Wire Dimeter range- 4-12mm Gscxckebw Run out table - 4m Speed -80' m/min. Reconstruction- 2022 Gsdpfjh In Thex Akhjkd

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, BIHLER Control System P-CNC 3E for BIHLER GRM 80E consist of: Gkodpfx Aotqdb Rokhod Control cabinet complete with SIEMENS SIMODRIVE SIEMENS Motor midel 1PH6137-4NB 40-Z

Condition: excellent (used), Year of construction: 1974, Equippment: 1 Gripper feeding system right hand side 1 Eccentricpress 90 kN 3 Standard-slide-units Gkodpfx Akspq H Upohsd 3 Narrow-slide-units Working range: Wire diameter range: 0,5 - 3,5 mm Stripmetal width: max. 32 mm Feeding length: max. 170 mm Output: max. 250/min.

Condition: ready for operation (used), Year of construction: 2008, - USED - 5-AXIS BRIDGE-TYPE VERTICAL MACHINING CENTRE     Gjdpfx Akswl R Ddjhokd X-AXIS TRAVEL: 1750 mm Y-AXIS TRAVEL: 1400 mm Z-AXIS TRAVEL: 600 mm RAPID FEEDS X-Y-Z: 35 m/min SPINDLE: 18000 rpm; 18,5-25 kW; HSK A63 TABLE SIZE: 1000 x 1200 mm MAX ADMITTED LOAD: 5000 Kg TOOL MAGAZINE: A CATENA ; 30 POS HEAD: A/B AXIS AUTOMATIC CONTROL UNIT: HEIDENHAIN iTNC 530 WEIGHT: 18000 Kg OVERALL DIMENSIONS: 6000 x 4000 x 3850 mm ACCESSORIES: SWARF CONVEYOR ; LASER TOOL SETTER ; PORTABLE HANDWHEEL

Condition: new, Year of construction: 2024, operating hours: 50 h, machine/vehicle number: 305, Available: February 2023 Control: Osai X-axis: approx. 3,100 mm Y-axis: approx. 2,100 mm Z-axis: approx. 1,000 mm A-axis: ± 115° C-axis: ± 360° Clamping table Clamping surface: approx. 3,100 x 2,100 x 213 mm Aluminum with T-slots across every 250 mm Max load: 1000kg distributed over the entire surface 2-axis milling head ST7 Spindle power: 10 kW Spindle speed: max. 24,000 min-1 Torque: 15.3 Nm Tool holder: HSK 63F Tool clamping: pneumatic Godjwwq Hcspfx Akhskd Blowing air / MMS: outside Drives linear axes Feed speed X and Y axes: up to 50 m/min Z-axis feed rate: up to 30 m/min Color Housing, portal, control cabinet: light gray Z-slider and milling head: orange Additional equipment - 15-way tool changer - Control in a separate, rollable desk

Condition: excellent (used), Year of construction: 1972, functionality: fully functional, press force: max. 1.250 to. daylight: max. 480 mm width: 585 mm Gkodpfxswuutbs Akhsd stroke: max. 355 mm weight: 9.000 Kg. Note: the press is been partly reconditioned by SACK & KIESSELBACH and the control system is been repalced.

Condition: new, Year of construction: 2026, Working area: 1500 – 3000 x 2100 – 12000 mm Z axis range: 500 – 1500 mm Godpjn Nv H Sjfx Akhjkd Linear bearing: Bosch Rexroth 35 Speed: X, Y up to 45 m/min; C, A up to6000 degrees/min Program resolution: 0,0005 mm Positioning accuracy: 0,01 mm Gate drive: double-sided master / slave with gate angle correction Electrospindles: 8 kW up to 36 kW Electrospindle inverter: yes Maximum revolutions of the electro-spindle: 24 000 rpm (option 6000, 40 000 50 000) Construction: Steel welded, ribbed, stress relieved, precision machined Table type vacuum, hybrid, steel, aluminum with M16 or M18 holes

Year of construction: 1995, condition: used, pressure 125 t stroke 10-80 mm Gedpfx Aelp U Nqskhjkd no. of strokes 240 Hub/min ram - range of adjustment 80 mm table surface area 850x600 mm ram surface 760x550 mm hole in the table 850x130 verstellbar mm table height 1100 mm tool hole in ram Ø 50 mm total power requirement kW weight of the machine ca. 13 t dimensions of the machine ca. BxTxH: 3000x2000x3300 mm

Condition: reconditioned (used), BSTA 110H, with BBV 202 /120 feeder Mechanically overhauled. CE-conversion possible. Gksdsizi Hmepfx Akhsd Contact us for details!