Complete sawmill (stationary)

Boldrew HORIZONTAL BAND SAWING MACHINE A 1200 BI

Condition: used, Weinig Profimat 22 with 4 spindles. Left mobile tree with measurement sensor, for automatic shifting based on the width of parts entering processing. Dimensions and weight: Dim. 330*145*H160. Weight 1400 kg. (on pallet) Nedpfx Aoryb D Seg Tswh

Year of construction: 1978, condition: used, machine/vehicle number: 068242, Cup wheel diameter: 175 x 60 x 51 mm or 125 x 40 x 51 mm 2 grinding wheel speeds: 1450/2900 rpm Table size: AT-F 205 x 345 mm Njdpebx Elisfx Ag Tjwh Space required: 1070 x 650 x 1180 mm Drive motor: 500 V (with 380 V, 1/3 power loss), accordingly 0.6 kW

Condition: new, Year of construction: 2021, total length: 2,770 mm, Tugger Club Car Precedent Drive Electric Year built 2021 Nwsdsxpx Szepfx Ag Tjh

Condition: like new (used), Year of construction: 2000, operating hours: 25,000 h, travel distance X-axis: 10,300 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,800 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, position of the milling head: 2.5 x 2.5 °, spindle speed (max.): 3,000 rpm, spindle speed (min.): 60 rpm, table width: 3,300 mm, table length: 12,000 mm, mount diameter: 50 mm, total height: 48,750 mm, total width: 100,000 mm, total length: 212,000 mm, overall weight: 100,000 kg, Duplex milling are two machines located one opposite the other which can work seperately or as single machine, workpiece can be machined with 2 simultaneous spindles. Production increase of up to 50% in relation to conventional solutions, i.e. individual milling machines Improvements in part precision, by managing to do the machining of the part in one single setup, in most of the cases One sole operator can control the DUPLEX milling machines Nwsdorx Rxtjpfx Ag Teh Reduced space and investment requirement comparing with two single machines Fast investment amortization due to the high productivity Duplex solution admits different configurations: single working area, pendulum working areas For machining excavator arms / boom like, CAT, Caterpillar, Komatsu, Hitachi, Hyundai, Doosan, Case, Bobcat, JCB, Kobelco, Liebherr, Kubota, Takeuchi, Volvo X-Axis: 10300mm Y-Axis: 2000mm Z-Axis: 1800mm Table Length: 12000mm Table Width: 3300mm Table load: 100000 Power on spindle: 22/30kW Spindle speeds: 60 - 3000Rpm Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 10000mm/min. Feed rate Y-Axis: 10000mm/min. Feed rate Z-Axis: 10000mm/min. Millinghead auto-index:2.5 x 2.5° Working hours: 25000H Length: 21200mm Width: 10000mm Height: 4875mm Weight: 100000kg

Condition: used, Year of construction: 2000, functionality: fully functional, Trimming line consisting of: centering table H42 (factory-overhauled EWD 2000), chipper canter FZ 3 (factory-overhauled EWD 2000), converted to servo cylinder; infeed BNK with square timber centering, BNK 200/6, year of manufacture 2000; board separator ASV, year of manufacture 2000; hydraulic unit; central lubrication. Without electrical control equipment. Dismantled, chipper canter and BNK stored in the hall. Nedpfsx Tpzdox Ag Towh

Condition: used, TECHNICAL DETAILS - Number of axes : 10 - Number of spindles : 2 MAIN SPINDLE Nwjdpfjuhhp Sex Ag Toh - Max. bar diameter : 16 [mm] - Max. machining length : 184 [mm] - Spindle speeds : 10.000 [rpm] - C axis indexing precision : 0.1 [°] COUNTER-SPINDLE - Max. bar diameter : 16 [mm] - Spindle speeds : 10.000 [rpm] - C axis indexing precision : 0.1 [°] GUIDE BUSH HOLDER 1 - Number of positions : 5 - Number of motorized positions : 3 - Live tools speed : 8.000 [rpm] GUIDE BUSH HOLDER 2 - Number of positions : 5 - Number of motorized positions : 3 - Live tools speed : 8.000 [rpm] END ATTACHMENT - Number of positions : 4 - Number of motorized positions : 4 - Live tools speed : 8.000 [rpm] SECONDARY OPERATION - Number of positions : 6 - Number of motorized positions : 3 - Live tools speed : 8.000 [rpm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 14 [kVA] MACHINE HOURS - Number of working hours : 54.035 [h] EQUIPMENT - CNC : Fanuc PNC DECO - Rotating tool motor on : S2, S3, S5,S6 - Rotating guide bush - Parts catcher - Coolant tank * with high-pressure pump - Bar loader : IEMCA GENIUS 118 / 32LL - Cooling unit : MARKSA CSW 200 - Fire extinguisher * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer. - Number of turning tool holders : 3

Condition: new, Year of construction: 2026, type of input current: AC, input voltage: 400 V, overall weight: 66 kg, Our electric chainsaw with 5 kW is ideally suited for sawing stacks of firewood in conjunction with our sawing buck. By sawing entire bundles of firewood, a significant amount of manual labor is eliminated! Nwedpfxsfnrx Tj Ag Tsh In a one-person operation, up to 1 cubic meter of wood can be processed within a few minutes, and approximately 5 cubic meters per hour. The average time per cut is 1.5 minutes.

Condition: new, diameter 150 mm workpiece length 1300 mm work piece width 800 mm max. dia. of grinding wheel 150 mm turning speed range 0 - 2830 U/min work height max. 945 mm milling-head swivable +/- 180° engine output 1.5 kW weight of the machine ca. 230 kg. dimensions of the machine ca. 1435 x 1100 x 1510 mm The "Easy T" is the cost-effective alternative to the conventional ones grinding and deburring machines. His head consisting of a grinding wheel and a flap brush, can be swiveled by 180°. Thus, a faster Switching between the aggregates possible. Due to the weight-bearing arm the head can be easily moved over the workpiece. The result is one even edge rounding. The pad also prevents slipping of the smallest components. Furnishing : - Deburring and rounding of laser-cut or stamped sheet metal parts - Grinding head, consisting of a grinding wheel & a flap brush, can be swiveled by 180° - Working area 800 x 1300 mm - Weighted arm for easy pivoting - non-slip table pad - Ergonomic operation of the machine with the help of push buttons "On/Off" - Grinding head with infinitely variable speed via frequency converter Nedpfoxab Hpsx Ag Tjwh - Handle for ergonomic handling

Condition: good (used), Year of construction: 2003, Automatic hydraulic gluing press Kallesoe Type LV 7821 press is used for gluing wooden elements, e.g. tabletops with maximum dimensions of 7800 mm x 2100 mm, the factor which accelerates gluing is warm water supplied to the press shelf and being in continuous circulation (it can be supplied from CO or heated by heaters mounted on the press) Heating power of the press 72kW Maximum capacity of the press up to 2000 m2 / 7.5h Nwedpforqzgkex Ag Tsh Glue applicator with feeder for Kallesoe press Type KL40 - used to automatically apply glue to each lamella and transfer directly to the press LV7821

Condition: new, Year of construction: 2025, functionality: fully functional, SCHORR Log Splitter HS-22PE PRO – 22 Tons Splitting Force -- 22 t splitting force – effortless splitting of hardwood and large logs -- Heavy-duty construction (340 kg) – robust hydraulics and stable steel frame -- Combination drive: PTO and 400V electric motor – flexible use in the forest or on the farm -- Splitting length up to 110 cm – ideal for long log sections -- Practical log lifter – lifts heavy logs and functions as a safety guard -- Retractable cylinder (1.99 m) – easy to transport and space-saving storage -- 3-point hitch (Cat. I & II) – transport directly on the tractor -- Two-handed operation and safety features – maximum work safety -- Mobile thanks to wheels and transport wheel Performance and Flexibility The HS-22PE impresses with powerful hydraulics and reliable continuous operation. Thanks to PTO and 400V electric motor, you have the choice: mobile operation on the tractor or quiet, emission-free operation on the farm. Comfort and Efficiency -- Log lifter for handling heavy timber – no strenuous manual lifting -- Automatic or manual return for fast or precise working -- Two speeds – rapid approach, powerful splitting Robust Construction With high-strength steel, durable hydraulic components, and stable footing, the HS-22PE is built for tough use. The large transport wheels make moving easy, even on uneven terrain. Technical Data Manufacturer (Short Name): SCHORR -- Model designation: HS-22PE -- Splitting force: 22 tons Nwodpfxow Smphe Ag Teh -- Own weight: 340 kg -- Drive: Electric (400V 5.5 kW, 16A) or PTO (540 rpm) Basic Dimensions -- Overall length: 1300 mm -- Overall width: 1450 mm -- Overall height: 2470 mm -- Hydraulic cylinder diameter: 11.5 cm -- Piston rod diameter: 6 cm -- Splitting wedge length: 22 cm -- Max. / Min. splitting diameter: 40 cm / 8 cm -- Distance between wedge & ground: 16 cm Speed -- Cylinder speed PTO: Advance 5.5 s / Return 9.5 s -- Cylinder speed electric motor: Advance 7.5 s / Return 14.5 s Service and Delivery -- Spare parts always in stock -- Delivery or collection in 48465 Schüttorf possible (by appointment only) -- Financing and leasing available on request We are happy to offer you personal advice on the SCHORR HS-22PE PRO.