Used Lowboy semi-trailers / low loaders for sale (222)

Condition: used, overall weight: 48,000 kg, maximum load weight: 38,300 kg, axle configuration: 3 axles, first registration: 06/2022, next inspection (TÜV): 07/2024, total width: 2,540 mm, Equipment: ABS, Extract from the equipment. Complete equipment on request. * Loading area in extendable design * JOST saddle supports (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) * BPW axles and suspension, 2 axles rigid, 1 axle with self-steering * Air suspension with lifting and lowering valve * Tires 235/75 R 17.5 3PMSF Dksb Etwvjvl N Rdskel * Braking system in accordance with EU regulations with EBS-E (2S2M) * 2 inch kingpin * A galvanized steel front wall, approx. 400 mm high * Galvanized extensions, extendable by approx. 230 mm on each side * Aluminum side walls that can be plugged onto the gooseneck * 1 galvanized tool box, integrated in the beveled gooseneck * 3 pairs of WADER container pockets in the loading area for a 20' (30') or a 40' container * 6 pairs of stake pockets in the outer frame of the loading area * Lift axle on the front axle with control by TEBS E * A pair of one-piece aluminum ramps approx. 2,500 x 600 mm, ramps with spring lifting mechanism, manually movable, maximum load per pair: 24,000 kg (+360 kg) * 2 LED reversing lights mounted on the rear panel * 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear * Load gauge for determining the axle loads including load diagram * HRM metallization (High Resistance Metallization) * Single-color paintwork in RAL 3002 carmine red

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, Year of construction: 2025, Equipment: ABS, Wiese 3-axle forklift transporter in mega design Fifth wheel height 960 mm Dob Etovw Hl Aowvkekl * Construction in curtainsider design with side sliding tarpaulins and sliding roof * Curtainsider construction height at the side 2810/3120 mm from loading area to 1 lower edge of outer beam * Chassis length approx. 13620 mm * Wheelbase: approx. 8000 mm * Support winch position approx. 2300 from kingpin * Driving height unloaded approx. 1110/800 (top edge of floor) with fifth wheel height 960 mm unloaded * E-bike holder in winch design for 1 E-bike * Pair of lashing eyes (cast rings) with crossbar at the top (5t per lashing ring with 4mm AuRa) * Pallet stop bar * 24 ton telescopic support winch SAF * Last axle as trailing steering axle * First axle as lift axle * Axle spacing approx. 1310/1310 mm * Air suspension with lifting and lowering device * Twin tires 205/65 R 17.5 * Interior LED light on the rear pillar top left + right * Roof system can be locked at 2 driving heights using a locking system * Lifting roof can be raised approx. 400 mm * LED work lights * Floor: Certificate for tested forklift axle load 9.0t according to DIN EN 283 1 (screen-printed floor across) * Chassis painted in RAL 9005 jet black * The trailer is prefabricated. The rear ramp design can still be freely selected. Either as a stretch ramp or as a heavy-duty tail lift The complete construction description is available on request We are happy to provide you with further information

Condition: used, overall weight: 45,000 kg, empty load weight: 12,900 kg, maximum load weight: 25,560 kg, axle configuration: 2 axles, first registration: 05/2018, tire size: 245/70 R17,5, Equipment: ABS, | DOLL 2-axle low bed | Iron loading ramps | Removable gooseneck with hydraulic support, | 2 axles steered with radio remote control | Rear air suspension adjustable left and right, | Length/width: 13500mm / 2550mm | Extendable to 19,162 mm 6m | Widenable to 3000mm | Tires: 245/70 R17.5 twin tires, | Own weight: 12,900kg, Gross vehicle weight: 45,000 kg | NL: 25560kg | Fifth wheel height 135cm | Good condition | Errors, input and advance sales excepted. Dkjb Ejwh Trvstwvksl

Condition: used, overall weight: 36,000 kg, maximum load weight: 26,240 kg, axle configuration: 2 axles, loading space length: 10,819 mm, first registration: 10/2008, Equipment: ABS, Manufacturer B-XL Model 4.5 m. 2 axle extension Year 2008 Condition Good Serial Number WKVDAS00200021091 Ref. nr. 7721 Reg. date: 27-10-2008 Dksb Etwsvl Dkrjvkjl Drum brake: ? ABS: ? Rear axles: SAF Suspension: Air Tire Size: 245 / 70R17,5 Cover% left 40 - 40% Total weight: 36000 kg. Net weight: 9760 kg. Steering rearaxle:?

Condition: used, overall weight: 34,500 kg, axle configuration: 2 axles, first registration: 08/1986, total width: 2,500 mm, !! NO TÜV AUTHORIZATION !! Total length of low loader: 15.5 m Dsb Eov Tg I Aotwvkskl "Errors, typographical errors, and prior sale reserved"

Condition: used, overall weight: 54,500 kg, maximum load weight: 45,260 kg, axle configuration: 3 axles, loading space length: 16,470 mm, loading space width: 2,550 mm, loading space height: 855 mm, first registration: 05/2022, next inspection (TÜV): 02/2026, Year of construction: 2022, total width: 2,550 mm, total height: 855 mm, Equipment: ABS, 3-axle GOLDHOFER Stepstar telescopic low loader First registered May 2022, first owner Dkebjwdkkbo Etwvksl German registration Mileage only 72,656 km Fifth wheel height approx. 1,200 mm Fifth wheel load up to max. 18,500 kg Second screw-in position for the kingpin, also suitable for 6x4 tractors Permissible gross vehicle weight (technical) 54,500 kg Unladen weight only 9,240 kg Gooseneck length 4,100 mm Lowbed length 9,300 mm + telescope 3,000 mm = 12,300 mm Loading height 855 mm (-60/+140 mm) Second loading height 895 mm (-100/+100 mm) Vehicle width 2,550 mm Excavator trough (LxWxH) 3850 x 760 x 310 mm Wheelbase 2 x 1410 mm Single-piece loading ramps, load capacity 38,000 kg, length 3000 mm, width 800 mm, larch flooring, hydraulically foldable and laterally adjustable, operated via cable remote control, 24-volt electric hydraulics Sloped rear of the vehicle 8° to a length of 550 mm Slide design for easy installation and removal of the ramps Mechanical spring-supported comfort downpipe sockets at the rear of the vehicle Frame refined with corrosion-inhibiting zinc dust primer + cavity sealing BPW axles ECO Max drum brakes 1st axle LIFT AXLE 3rd axle self-steering KNORR Trailer EBS with RSS driving stability control KNORR Trailer Information Module 13-wheel tires 245/70 R 17.5 All LED lighting, 1 pair of additional reversing lights at the rear Gooseneck load securing: 3 pairs of 5000 kg lashing rings 1 pair of stake pocket bars on the rear gooseneck 1 pair of stake pocket bars on the front gooseneck for positive locking Load securing lowbed: 1 pair of 10,000 kg lashing points in the center of the loading area behind the gooseneck 1 pair of 10,000 kg lashing points in the center of the rear area 8 pairs of 10,000 kg lashing points in the outer frame 7 pairs of stake pockets in the outer frame Accessories: Aluminum plug-in side walls, 400 mm high Steel front wall, 400 mm high Extra-wide package with 2 pairs of warning signs and plug-in rotating beacon + 2 pairs of adapters for extending the warning signs to 4500 mm RENT is the new BUYING, with us also available immediately for RENTAL or full-service LEASING-----

Condition: new, overall weight: 102,000 kg, maximum load weight: 85,949 kg, axle configuration: > 3 axles, total width: 2,850 mm, Equipment: ABS, Excerpt from the equipment list. Complete equipment available upon request. Gooseneck * Hydraulically raise/lower and retractable gooseneck. Length ± 3,650 mm * 2 pairs of lashing rings, foldable outwards (LC 5,000 daN) * 2 pairs of lashing rings on the gooseneck (LC 10,600 daN) * 1 pair of lashing rings on the middle section of the gooseneck (LC 10,600 daN) 2-axle front chassis * 2-axle compact front chassis: Hook attachments at the front and rear. Length: approx. 2,200 mm, chassis width: approx. 2,850 mm * 1 pair of lashing rings at the front (LC 10,600 daN) * 1 pair of lashing rings at the rear, on the hook receptacle (LC 16,000 daN) Excavator Bridge BB-A (2+4) * Telescopic excavator bridge BB-A with drive-over bridge hooks at the front and with bolt-and-link coupling at the rear * Base width: approx. 2,850 mm * Length: approx. 6,650 mm * Beam height: approx. 400 mm * Beam width: approx. 1,350 mm * Loading height approx. 550 mm with ground clearance approx. 150 mm * 5 pairs of hanging lashing rings (LC 10,600 daN) 4-axle rear-mounted chassis * Mechanical bolt-and-link coupling for attaching a lowbed at the front * Rear end cross member * Chassis width: approx. 2,850 mm * Chassis length: approx. 5,480 mm * 2 pairs of retractable lashing rings (LC 10,000 daN) * 1 pair of retractable lashing rings (LC 5,000 daN) * 3 pairs of 2-ton lashing points for tensioning straps * 3 pairs of lashing rings horizontally mounted in the chassis (LC 10,600 daN) Steering * Front and rear steering controlled via pushbuttons using a wired remote control, with axle alignment control (without installation in the tractor unit) Paintwork * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure the best corrosion protection * Final coating with two coats of 2K topcoat, solid color in RAL 3002 Carmine Red according to RAL system 841GL Pendulum axle, 2-axle front chassis Deb Etjuvbdtswvkekl * Pendulum axle, all axles hydromechanically steered. Technical axle load: 12,000 kg each * Hydraulic axle compensation Tires, front chassis * 8x at manufacturer's discretion (M+S) 285/70 R19.5 Pendulum axle, 4-axle rear chassis * Pendulum axle, all axles hydromechanically steered. Technical axle load: 12,000 kg each * Hydraulic axle compensation Rear chassis tires * 16x at manufacturer's discretion (M+S) 285/70 R19.5 load index 150/148J Accessories included * Yellow-red air couplings on the galvanized front connection strip * Steel bulkhead ± 400 mm high * Truck hydraulic connection with flow regulator (40 l/min), including boom for suspending the supply lines. The tractor unit's tank must hold at least 80 l with MAX Trailer couplings * 3.5 kingpins * BEKA-MAX central lubrication system for a gooseneck with standard NLGI-2 grease * Aluminum side walls and rear wall, ± 400 mm high, anodized, attachable to the gooseneck * BEKA-MAX central lubrication system for a 2-axle chassis with NLGI-2 grease * Foldable extensions with steel mattresses, adjustable in width from ± 2,850 mm to ± 3,250 mm * Rear chassis with trough * One locking point every ± 500 mm on the extension with mechanical locking * BEKA-MAX central lubrication system for a 4-axle chassis with NLGI-2 grease Including special accessories * Two stainless steel tool boxes (855 x 340 x 390 mm) on the left and right gooseneck * Single-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery. Power: 9.5 kW (12.9 hp) at 3,000 rpm. Emissions standard: EU Stage V.

Condition: used, overall weight: 100,000 kg, axle configuration: > 3 axles, first registration: 01/1995, Year of construction: 1995, * ??Gooseneck only?? Dob Etwvjwfmlqjkjkl * Was on a Scheuerle low-loader with 6 axles * Year of manufacture: 1995 * More pictures and videos via WhatsApp * Information without guarantee and subject to prior sale.

Condition: used, maximum load weight: 43,500 kg, axle configuration: 3 axles, first registration: 09/2009, * Faymonville STBZ-3VA low-bed trailer * First registered in 2009 * Weight: 20,500 kg * 3-axle steered trailer Dkobswhhy Ij Etwvkjl * Hydraulic suspension * Radio remote control: lifting, lowering, steering, gooseneck tilting * Central lubrication front and rear * Extensions up to 3 m * Ramps * Loading length in bed: 7.30 m, extendable by 4 m * Loading height: 35 cm * Total length from the pivot point: 14.46 m * Pivot points in 40 and 50 mm * Operation via hydraulics on the truck and via NATO socket * Payload: with 4-axle tractor unit at 12 t axle load: approx. 43,000 kg * Payload: with 3-axle tractor unit at 12 t axle load: approx. 32,500 kg * Rear coupling point for the installation of extension beams up to 30 meters in bed

Condition: used, overall weight: 36,000 kg, empty load weight: 9,963 kg, axle configuration: 3 axles, first registration: 06/2017, suspension: air, tire size: 385/65 R22,5, Equipment: ABS, | Schmitz SBC S3B refrigerated trailer | Meat conveyors | Schmitz aggregate | 8581h on diesel | Pallet box | Lift axle | Schmitz axles with disc brakes | Spare wheel holder, toolbox | Subject to errors and advance sale Dob Etwewgprcsvkokl

Condition: used, overall weight: 48,000 kg, empty load weight: 14,100 kg, maximum load weight: 33,900 kg, axle configuration: > 3 axles, first registration: 12/1999, suspension: air, color: green, tire size: 235/75 17,5, Year of construction: 1999, tire condition: 50 %, front tire size: 235/75 17,5, rear tire size: 235/75 17,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Vehicle number for inquiries: 68575 Nooteboom, Euro * Year of manufacture: 1999 * ABS, anti-lock braking system * Air suspension * Total weight: 48,000 kg * Empty weight: 14,100 kg * Payload: 33,900 kg * Axle manufacturer: SAF% * Tire condition 1st axle: 50% -- 50% - Tire size: 235/75 R17.5 * Tire condition 2nd axle: 40% -- 40% - Tire size: 235/75 R17.5 * Tire condition 3rd axle: 50% -- 50% - Tire size: 235/75 R17.5 * Manufacturer ES-GE * 3 axle hydraulically forced steering * Telescopic up to 9950mm * Telescopic extension defective * Loading area 10990mm Subject to errors and prior sale. You can find more pictures and 360 degree pictures on our homepage. Our extensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast, uncomplicated financing * Application for all (export) documents * Ordering export license plates / customs license plates * Vehicle preparation: new tarpaulins, labels, paintwork, etc. * Professional loading / load securing * TÜV inspections, registration service * Transfer of commercial vehicles Ask our trained specialists, we will be happy to advise you. Reference no. for inquiries: 68575 Nooteboom, European norm * Year of manufacture: 1999 * ABS, anti-lock braking system * Pneumatic suspension * Total weight: 48,000 kg * Empty weight: 14,100 kg * Payload: 33,900 kg * Axle manufacturer: SAF% * Tire condition 1. Axles: 50% -- 50% - Tire size: 235/75 R17.5 Djb Esv E A Ivstwvkokl * Tire condition 2. Axles: 40% -- 40% - Tire size: 235/75 R17.5 * Tire condition 3. Axles: 50% -- 50% - Tire size: 235/75 R17.5 * Manufacturer ES-GE * 3 axle hydraulically steered * telescopic up to 9950mm * Telescopic extension defective * Loading area 10990mm Subject to errors and prior sale.You can find more pictures and 360 degree images on our homepage. Our comprehensive service includes, for example: * Purchase/sale/rental of utility vehicles *Quick uncomplicated financing * Applications for all (export) documentation * Ordering export license plate * Vehicle preparation: new tarpaulins, lettering, varnishing etc. * Professional loading / load securing * TüV approvals, approval service * Transfer of utility vehicles Ask our trained staff, we will gladly advise you.

Condition: used, overall weight: 48,000 kg, maximum load weight: 38,000 kg, axle configuration: 3 axles, loading space length: 12,630 mm, loading space width: 2,550 mm, loading space height: 870 mm, first registration: 08/2022, next inspection (TÜV): 04/2026, Year of construction: 2022, total width: 2,550 mm, total height: 870 mm, Equipment: ABS, 3-axle semi-low loader HUMBAUR HTS30K with excavator boom trough First registered August 2022, like new condition Dimensions (L x W x H) 12,630 x 2,540 x 870 mm Drive-on angle approx. 10° Lowbed length 8,680 mm Highbed length 3,500 mm Fifth wheel height approx. 1,200 mm Unladen weight 10,370 kg Kingpin adjustable by 340 mm for 2+3 axle tractors Single-piece galvanized ramps with rubber coating, length 3,150 mm, width 750 mm Ramps hydraulically foldable and movable (dual-circuit hydraulics required from the tractor) 5 pairs of stake pockets and ramp rails Extra-wide package with quadruple warning signs, with folding outriggers and spruce planks Steel toolbox under the left loading area for storing the planks Hydraulic rear support Load securing: 5 pairs of 10-ton lashing rings in the low bed 5 pairs of 6-ton lashing rings in the outer frame, bolted 3 pairs of 6-ton lashing rings in the high bed 6 pairs of 2-ton lashing rings above the outer frame wheel cutout 3 pairs of 3-ton lashing rings in the low bed outer frame Dksbowdkkhs Etwvksl Chassis frame hot-dip galvanized, visible sides painted SAF axles with drum brakes 1st axle: LIFT AXLE 3rd axle: SELF-STEERING WABCO Trailer EBS WABCO Smartboard 12 tires: 235/75 R 17.5, tread depth 80% RENTING is the new BUYING, also available from us as a RENT or Full-Service LEASE immediately-----

Condition: used, overall weight: 48,000 kg, maximum load weight: 36,210 kg, axle configuration: 3 axles, first registration: 09/2023, next inspection (TÜV): 10/2025, total width: 2,540 mm, Equipment: ABS, Extract from the equipment. Complete equipment on request. Gooseneck * with bevelled corners at the front approx. 45° and with rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading area * in extendable version with rear bevel approx. 1,000 mm x 8° * Can be raised and lowered hydraulically after the gooseneck, length approx. 2,800 mm * 6 pairs of lashing rings that can be folded outwards (LC 5,000 daN) * 2 pairs of lashing rings that can be folded outwards (LC 10,000 daN) * 1 pair of lashing rings that can be folded inwards on the central support at the front (LC 10,000 daN) * Cutouts in the outer frame of the loading area for hanging tensioning straps (LC 2000 daN) * Grating flooring C40/4 (point load approx. 2.3 t on an area of approx. 20 x 20 cm) * Checkered sheet covering above the axles Two-part steel ramps * A pair of galvanized two-part steel ramps, approx. 2,750 + 1,400 x 800 mm, with grating covering C40/4 (point load approx. 2.2 t on an area of approx. 20 x 20 cm) * Ramp with hydraulically foldable and unfoldable ramp sections * Hydraulic lifting mechanism, hydraulically movable * Maximum load per pair: approx. 40,000 kg * In accordance with Regulation 1230/2012/EU, ramps with a length of less than 300 mm in the driving position do not have to be taken into account in the vehicle length of 16,500 mm Axles * BPW axles and Suspension * 2 axles rigid, 1 axle with self-steering * Technical axle load: 12,000 kg each * Electro-magnetic reversing lock can be activated via reverse gear and manually Air suspension * with lifting and lowering valve Tires * 235/75 R 17.5 Seat supports * JOST seat supports (mechanical) with 2-speed gearbox for approx. 24 t lifting load (approx. 50 t test load) Brake system * in accordance with EU regulations with EBS-E (2S2M) * without connecting lines to the tractor unit Paintwork * First-class and long-lasting corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer * A high-quality 2-component (2K) top coat in a single color in RAL 3002 carmine red * Rear section metallized and painted in RAL 9010 (pure white) Steel construction * made of high-strength fine-grain steel * Steel qualities: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Electrical system * in accordance with EU regulations Lighting Dkeb Etjvzi E Hswvksl * 24 volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX on the front connection panel with sockets 24N, 24S & 15-pin. * Connection according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Accessories included * 2 inch kingpin * A galvanized steel bulkhead, approx. 400 mm high * A spare wheel holder in front of the bulkhead * Yellow-red air couplings on the galvanized connection strip at the front * 4 brake shoes with holder on the bulkhead * Galvanized folding supports under the slope of the loading area * A bracket for a rotating beacon at the rear of the trailer * Grating in the slope of the gooseneck C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) * Grating in the slope of the loading area C40/4 (point load approx. 3.4 t on an area of approx. 20 x 20 cm) * Cover plates to bridge the free space between ramps and loading area * A painted layer of sand on the checker plates, above the kingpin and the loading area as anti-slip protection * Yellow reflective tape in accordance with EU regulations on the side and rear of the trailer * Elec

Condition: used, overall weight: 49,000 kg, axle configuration: 3 axles, loading space length: 12,780 mm, loading space width: 2,540 mm, first registration: 06/2014, next inspection (TÜV): 11/2024, total width: 2,540 mm, Equipment: ABS, For vehicle inquiries, please contact Mr. Seidel (tel. +49 22 88 22 88). Faymonville Multimax F-S43-1AAF Low Loader---- * TÜV 11/2024 * Hydraulic lifting deck * Hydraulic ramps * Remote control cable winch * Work lights Deb Etwjv D Sk Dsvkjkl * SAF axles * 3 axles * Gross vehicle weight: 49,000 kg (technical 55,000 kg) * Unladen weight: 11,700 kg * Payload: 37,300 kg (technical 43,300 kg) * Loading space dimensions: L = 9,140 mm + 2,680 mm on the gooseneck W = 2,540 mm * Lifting deck: L = 2,980 mm * Tire tread: 1st axle 6-8 mm, 2nd axle 6-7 mm, 3rd axle 5-10 mm On request We will be happy to provide you with a leasing or financing offer. Mr. Seidel (Tel. ) will be happy to assist you. Further information can be found on our website. !!! Errors, changes, and prior sale excepted!!!

Condition: used, overall weight: 51,000 kg, maximum load weight: 33,650 kg, axle configuration: > 3 axles, loading space length: 16,450 mm, loading space width: 2,550 mm, first registration: 08/2013, next inspection (TÜV): 10/2025, total width: 2,550 mm, total height: 2,500 mm, Equipment: ABS, 4-axle low-bed semi-trailer with lowering unit, gooseneck hydraulically retractable, trailer extendable by 5,400 to 23,700 mm total length, can be widened to 3,000 mm, foldable extensions, loading area with lowering unit: 18,050 mm, low bed 7,700+5400 mm, high bed 4,500 mm, gooseneck: 4,250 mm, 14 x heavy-duty lashing rings per side, 12 x stake pockets per side, central lubrication system, NATO external start socket, Duo-Matic brake connection, tow coupling, extendable warning signs, ABS, EBS, GIGANT axle(s), all axles hydraulically forced steered, remote control for re-steering the wheels, drum brake system, air suspension with lifting and lowering device, vehicle can be covered with advertising and/or labeled be Our offer is generally without a new TÜV inspection. If a new TÜV inspection is required, we will be happy to make you an offer from our partner workshops! The vehicle can be covered with advertising and/or labeled. Our general delivery and payment terms apply. We would be happy to make you a financing or leasing offer for this object. Please contact us! Djb Etwvjvravdjkskl

Condition: used, overall weight: 39,000 kg, empty load weight: 10,229 kg, maximum load weight: 25,771 kg, axle configuration: 3 axles, first registration: 05/2018, suspension: air, tire size: 385/65 R22,5, Equipment: ABS, | Austrian Schmitz SKO24 refrigerated trailer | with meat conveyors | ThermoKing SLX300 refrigeration unit | pallet box | Schmitz axles with disc brakes | spare wheel holder, toolbox | customs seal | approx. 9,360h mileage | Subject to errors and prior sale. Sale to businesses only. Debswgprie Etwvkokl

Condition: used, overall weight: 38,000 kg, maximum load weight: 25,550 kg, axle configuration: 2 axles, first registration: 11/2024, next inspection (TÜV): 11/2025, total width: 2,540 mm, Equipment: ABS, Extract from the equipment. Complete equipment on request. Gooseneck * hydraulically raised/lowered and removable Low bed * Low bed designed as an extendable tank bridge in a low construction Chassis * Rear chassis in short version with excavator trough * BPW axles and suspension, all axles hydro-mechanically forced steered * Air suspension with raising and lowering valve * Axle tool * Tires 235/75 R 17.5 twin tires. Load index 143/141J (144/144F) * WABCO brand brake system * EBS-E in accordance with EU regulations Accessories * Steel bulkhead, pluggable, approx. 400 mm high * 3 kW electro-hydraulic unit for controlling the hydraulic processes * 2 inch kingpin * The outer supports of the low bed are provided with a painted layer of sand as a slip protection * 2nd driving height for upper driving position, max. ± 50 mm from the normal driving position * Steering can be operated from the front and rear using a cable remote control via push buttons * 2 axle load gauges mounted on the left side * Hydraulic connections from the gooseneck to the low bed with multi-coupling * Hanging rail for loose aluminum ramps at the front of the loading area between the low bed claws Djbevxc R Dj Etwvkokl * Removable loading floor with approx. 30 mm thick hardwood covering, can be inserted between the outer supports * Foldable Widenings, by approx. 230 mm per side * Widening planks, loose, framed in steel * 5 pairs of stake pockets on the outside of the outer supports of the loading area * Central lubrication system with 2 pumps, brand BEKAMAX, with normal grease according to NLGI-2 * Preparation for screw-on container positioning for 1x 20' or 1x 40' * Aluminum side walls that can be folded on the gooseneck and plug-in aluminum rear wall * Complete HRM metallization (High Resistance Metallization) * Single-color paintwork in RAL 3002 carmine red

Condition: used, overall weight: 31,000 kg, maximum load weight: 24,590 kg, axle configuration: 2 axles, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 700 mm, first registration: 06/2010, total width: 2,550 mm, total height: 2,750 mm, Equipment: ABS, ABS, EBS, BPW EcoPlus axle(s), last axle steered, TRIDEC steering, disc brake system, air suspension with lifting and lowering device, lift axle, screen-printed floor, 6 x stake pocket rail(s) in the middle of the loading area, continuous lashing holes in the outer frame, 2x storage box, vehicle can be covered with advertising and/or labeled Dkeb Etwsvnnd Iovksl Our offer is generally without a new TÜV inspection. If a new TÜV inspection is required, we would be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or labeled. Our general delivery and payment terms apply. We would be happy to make you a financing or leasing offer for this object. Please contact us!

Condition: used, overall weight: 33,000 kg, empty load weight: 8,195 kg, maximum load weight: 24,805 kg, axle configuration: 3 axles, loading space height: 265 mm, first registration: 04/2015, suspension: air, tire size: 385/65 R22,5, total length: 2,450 mm, total width: 4,000 mm, Equipment: ABS, | Schmitz Multitemp refrigerated trailer | Lift axle | Schmitz axles with disc brakes | Toolbox | Spare wheel holder | Carrier MT 1950 refrigeration unit | Tires: 385/65 R22.5 | Diesel hours 13591 | Subject to errors, input errors and advance sales. Dob Etowgfpqjwvkekl

Condition: used, overall weight: 58,000 kg, maximum load weight: 44,980 kg, axle configuration: > 3 axles, first registration: 09/2024, next inspection (TÜV): 09/2025, total width: 2,550 mm, Equipment: ABS, Extract from the equipment. Complete equipment on request. Chassis, cranked * Special steel frame made of high-strength fine-grain steel, electrically welded at the connection points, well-dimensioned outer frame * 4-axle arrangement. Wheel cover over the axles with spray mist suppression * All steel parts sandblasted * Side impact protection made of anodized aluminum mounted * Increased point load approx. 30,000 kg on approx. 4,000 mm * Special construction in the cranking area? for the greatest possible low bed length in conjunction with AluLeg drop supports instead of telescopic support winches, max. rear swing radius of the tractor unit approx. 2,100 mm Special structure with rear stanchion extension * Self-supporting aluminum roof belt / profile approx. 120 x 100 mm, sliding roof with plastic flaps * Rear stanchions can be extended to approx. 4,200 mm * Three sliding stanchions per side with rubber strain relief Dkeb Eolthgujtwvksl * Additional center stanchion locks in the roof belt and parking position, using a pull rope and spring latch * Lifting roof mechanically height-adjustable Lifting roof height approx. 400 mm can be operated on both sides or one side, without opening the opposite side or the doors * Additional height adjustment of approx. 480 mm in approx. 40 mm intervals with height adjustment in the stanchions * Front cover on the front wall for driving under tarpaulin up to a total height of approx. 4,400 mm * Four rows of stackable side approx. 150 mm aluminum slats, 450 mm pockets at the bottom, 4 rows of individual pockets above * Only 3 rows of insert slats in the loft bed. Intermediate spacing evenly distributed Floor * approx. 27 mm specially waterproof glued beech screen-printed panels, rough surface * Sheet steel in the wheel arch area * Can be driven over by a forklift truck in accordance with DIN? Standard * Outer frame flush with surface Brakes * WABCO compressed air brake system with EBS in accordance with EC standard 71/320 EEC including PREV (parking release safety valve) * Spring brake cylinder as parking brake * Wabco Smart Board with odometer and aggregate load display Axles * 4 x 10,000 kg SAF/Sauer with drum brakes in low-loader design * Air suspension with lifting and lowering device, total stroke approx. 230 mm * Third and fourth axle as friction-steered trailing axle with electrical and mechanical lock Twin tires * 235/75 R 17.5, -16-fold, including e-wheel holder. without electric wheel Paint finish * Chassis in RAL 3002 red, single color * Center stanchions, axles KTL coated black * Corner stanchions in hot-dip galvanized version * Plastic parts black * Hot-dip galvanized parts unpainted * Rims in factory silver * Body in RAL color single color Special equipment incl. * Air suspension in ECAS version, operated on the trailer * Extra-wide signage at the front and rear in galvanized, continuously telescopic version with attached marker lights including plug-in bases for rotating beacons (small signs) * Sliding roof frame unlocking also from the outside * 4 stanchion adapters for special outer frame profile, for locking the center stanchions as desired * PVC sliding tarpaulins, color similar to: RAL 9006 silver * Roof tarpaulin translucent, in extra-wide and extra-high versions, flat hooks, tarpaulin folds, closures with pawl /OCS * telescopic plug-in base on the rear left for rotating beacon including light * external frame for machine transport with approx. 64 lashing positions in 2,000 kg, 3,000 kg and 10,0

Condition: used, overall weight: 36,000 kg, empty load weight: 9,839 kg, axle configuration: 3 axles, first registration: 03/2016, suspension: air, tire size: 385/65 R22,5, Equipment: ABS, | Schmitz SBC S3B refrigerated trailer | Meat conveyors | Thermo King SLXe300 refrigeration unit | 4314h on diesel | Pallet box | Schmitz axles with disc brakes | Spare wheel holder, toolbox | Subject to errors and advance sale Dksb Ejwfr Htotwvksl

Condition: new, overall weight: 48,000 kg, maximum load weight: 35,610 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, Extract from the equipment. Complete equipment on request. Gooseneck * Gooseneck in SNT design to optimize the loading area length * Length approx. 3,700 mm * Gooseneck at the rear with bevel approx. 1,000 mm x 6° * Technical fifth wheel load 18,000 kg For tractor units: 4 x 2 and 6 x 2 Loading area * Telescopic loading area, length approx. 9,600 mm, with bevel at the rear approx. 900 mm x 6° * Loading area after the gooseneck can be raised and lowered hydraulically, length approx. 3,000 mm, load capacity up to approx. 9,000 kg * Pneumatic locking with conical bolt and reinforced locking positions * The supply lines are protected in the extendable support and adapt to the respective loading area length Ramps * Type: DR-10-900-4920-GR-HV-AXS * A pair of two-part AXS steel ramps with a length of approx. 4,920 mm and a width of approx. 900 mm * Open grating surface * Hydraulically foldable ramp tips * Ramps can be moved individually hydraulically by approx. 235 mm outwards and approx. 365 mm inwards * Maximum load and ramp angle according to technical data sheet: C470319 Maximum gradient angle with lowered loading area: approx. 9° Axles and suspension * BPW axles and suspension, 1st and 2nd axle rigid, 3rd axle self-steering * Technical axle load: 12,000 kg * Electro-magnetic reversing lock can be activated via reverse gear and manually * Air suspension with raising and lowering valve Braking system * WABCO EBS-E braking system in accordance with EU regulations. Without connection cable to the tractor unit Tires * 235/75 R 17.5 3PMSF twin tires, load index 143/141J (144/144F) Accessories included * Grating and sheet metal floor approx. 5 mm as additional reinforcement on the slope of the loading area * Flashing lights on the outside of the ramp tips with switch next to the ramp controls * Ramp secured in driving position using a quick release Dkob Etwjvmalnsvksl * Painted sand coating on the outer frame of the ramp and on the ramp tip * Mechanical seat supports with 2-speed gearbox and crank. JOST Module B - static test load = 50,000 kg * Continuous grating with approx. 5 mm sheet metal underlay as additional reinforcement, designed for point loading - on the lifting bed - on the loading area * Painted sand coating on the cover plates of the gooseneck and in the transition areas between the neck and lifting bed, between the lifting bed and loading area and between the loading area and ramps * Locking of the loading area with conical welded locking profiles, one locking point every 500 mm on the first 3,000 mm extension, then one every 1,000 mm * For tractor units with superstructures for container exchange systems or with hydraulic supports at the rear, please contact our company * Long holes for hanging and movable bridging elements: - on the fixed part behind the gooseneck - on the loading area at the front * All supply lines (electrical cables, ABS/EBS cables, brake lines, hydraulic lines, etc.) between the According to EU guidelines, the tractor unit and the semi-trailer low loader are part of the scope of delivery of the tractor unit and are not included in the scope of delivery of the vehicle manufactured by us * Cut-outs in the outer frame of the loading area and the lifting bed for attaching tensioning straps (LC 2,000 daN) * 11 pairs of recessed lashing rings lying in the outer frame of the loading area, foldable outwards (LC 10,000 daN) * 3 pairs in the outer frame of the lifting bed * 8 pairs

Condition: used, overall weight: 36,000 kg, empty load weight: 9,839 kg, axle configuration: 3 axles, first registration: 03/2016, suspension: air, tire size: 385/65 R22,5, Equipment: ABS, | Schmitz SBC S3B refrigerated trailer | Meat conveyors | Thermo King SLXe300 refrigeration unit | 4451h on diesel | Pallet box | Schmitz axles with disc brakes | Spare wheel holder, toolbox | Subject to errors and advance sale Dobewfr Hyo Etwvkokl

Condition: used, overall weight: 59,000 kg, maximum load weight: 40,180 kg, axle configuration: 3 axles, first registration: 09/2024, next inspection (TÜV): 09/2025, total width: 2,750 mm, Equipment: ABS, Excerpt from the furnishings. Full furnishings available upon request. * Hydraulically raise/lower gooseneck and retractable * Low bed with extendable external supports * Rear chassis with continuous prism excavator trough, approx. 1,450/900 x 505 mm * PENDULUM AXLE, all axles hydromechanically steered Dkjb Etewcu Smjwvkol * Hydraulic axle compensation * Braking system in accordance with EU regulations with EBS-E (2S2M) * Preparation for bolt-on container positioning for 1x 20' or 1x 40' container on the external supports * 3.5 inch kingpins * One galvanized steel bulkhead, approx. 400 mm high * Front and rear steering via cable remote control * Electro-hydraulic power unit * Load gauge for determining axle loads including load diagram * 2 pairs of bolt-on container brackets on the external supports 1x 20' or 1x 40' container * Aluminum side walls and rear wall on the gooseneck * Hydraulic connections from the gooseneck to the lowbed with multi-coupling * 7 pairs of stake pockets in the outer frame of the loading area * One stainless steel toolbox, approx. 1,350 x 400 x 400 mm, on the gooseneck * Foldable extensions, approx. 230 mm per side * Central lubrication system with 2 BEKAMAX (Pico) pumps * 6 pairs of threaded blocks between the lashing rings under the top chord on the outer beam for mounting RUD VLBG-4 screw-on rings * HRM metallization (High Resistance Metallization) * Paint finish in solid color RAL 3002 carmine red

Condition: used, overall weight: 48,000 kg, maximum load weight: 37,050 kg, axle configuration: 3 axles, first registration: 06/2022, next inspection (TÜV): 02/2026, total width: 2,540 mm, Equipment: ABS, Excerpt from the furnishings. Full furnishings available upon request. Gooseneck Gooseneck with beveled corners at the front approx. 45° and a rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading area Loading area behind the gooseneck can be raised and lowered hydraulically, length approx. 2,800 mm, with a rear bevel approx. 1,000 mm x 8° * 6 pairs of lashing rings that fold outwards (LC 5,000 daN) * 2 pairs of lashing rings that fold outwards (LC 10,000 daN) * 1 pair of lashing rings that fold inwards on the front central beam (LC 10,000 daN) * Cutouts in the outer frame of the loading area for attaching tensioning straps (LC 2,000 daN) * Grating C40/4 (point load approx. 2.3 t on an area of approx. 20 x 20 cm), checkered plate decking over the axles Two-part steel ramps * One pair of galvanized two-part steel ramps, approx. 2,750 + 1,400 x 800 mm, with C40/4 grating decking (point load approx. 2.2 t on an area of approx. 20 x 20 cm) * Ramp with hydraulically extendable and retractable ramp sections * Hydraulic lifting mechanism, hydraulically adjustable, maximum load per pair: approx. 40,000 kg Axles * BPW axles and suspension * 2 rigid axles, 1 self-steering axle * Technical axle load: 12,000 kg each * Electromagnetic reversing lock, activated via reverse gear and manually * Air suspension with lifting and lowering valve * Axle tool Tires * 235/75 R 17.5 3PMSF tires Seatposts * JOST seatposts (mechanical) with 2-speed transmission for a lifting capacity of approx. 24 t (approx. 50 t test load) Braking system * Braking system in accordance with EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Paintwork * First-class and long-lasting corrosion protection of the standard shot-blasted welded frame guaranteed by a two-component (2K) zinc dust primer * A high-quality two-component (2K) topcoat in a single color in RAL 3002 carmine red * Rear section metallized and painted in RAL 9010 (pure white) Steel construction * Steel construction made of high-strength fine-grain steel * Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Electrical system * Electrical system in accordance with EU regulations * Lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX on the front connection panel with sockets 24N, 24S & 15-pin connection according to ISO. 24N ISO-1185 24S ISO-3731, 15-pin ISO-12098 Accessories included * 2-inch kingpin * One galvanized steel bulkhead, approx. 400 mm high * One spare tire holder in front of the bulkhead * Yellow-red air couplings on the galvanized connecting strip at the front * 4 wheel chocks with brackets on the bulkhead * Galvanized folding supports under the sloped loading area * A bracket for a rotating beacon at the rear of the trailer * Grating in the sloped gooseneck C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) * Grating in the sloped loading area C40/4 (point load approx. 3.4 t on an area of approx. 20 x 20 cm) Deb Etwvswbx Enskekl * Cover plates for bridging the Clearance between ramps and loading area * A sand coating is applied to the checkered plates, above the kingpin, and on the loading area to prevent slipping. * Yellow reflective tape in accordance with EU regulations on the sides and rear of the trailer. * Electro-hydraulic unit located under the rear loading area. * A bracket for the warning signs, including a power socket, is provided on the gooseneck and