SECOND-HAND BAND SAW

Centauro CO 800

Condition: used, Motor 4.0 kW Roller diameter: 800 mm Max. cutting height: 440 mm Max. cutting width: 785 mm Table height: 970 mm Table dimensions: 1170 x 800 mm Blade width: 40 x 7/10 mm Blade length: 5630 mm Extraction port diameter: 120 mm Dimensions: 1625 x 940 x 2516 mm Weight: 650 kg Stock location: Nattheim Iodpfjwayzbjx Aggsba

Condition: used, Year of construction: 2024, DOWEL HOLE DRILLING MACHINE GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW, complete in standard design with: - Fully automatic electronic control with pulse operation via foot valve for clamping-drilling-releasing, electric intermittent operation. - Automatic retraction of the drilling unit after reaching the set drilling depth. - Automatic extension of the drilling hole depth when drilling on the end face. This eliminates the need to adjust the drilling hole depth from flat-face to end-face drilling (+10 mm, e.g. for a dowel length of 35 mm, drilling depth on the flat face 14 mm and drilling depth on the end face 24 mm). - 1 drilling bar with 21 spindles, pitch 32 mm, motor 1.5 kW (drilling feed 0-70 mm), incl. 21 quick-change chucks (Ganner system) for easy changing of the drill bits. - Easy pivoting of the drilling unit from 0° to 90°, supported by gas cylinders. - 1 clamping support movable in the Y-axis with 3 pneumatic clamping cylinders, for workpiece height up to max. 80 mm. Ideal stop system consisting of: - 1 stop rail 1800 mm for drilling shelves (aluminum profile 40x40 mm) with 3 stop blocks, with quick-change system, easily interchangeable from right to left stop side for drilling shelves in carcass structures in mirrored fashion, also suitable for row drilling in the 32 system. - Side stops and position settings, as well as the position of the drilling height above the support table, are adjusted by means of mechanical digital counters. - Side stops can be easily pivoted away, for the shortest possible conversion from carcass to frame and row drilling. - Clamping arms for the clamping support designed for row drilling positions up to max. 300 mm. - Ideal three-stage tool system. - 1 set of drill bits for dowels: - 5 carbide dowel drill bits, Ø 8x77 mm, right-hand - 4 carbide dowel drill bits, Ø 8x77 mm, left-hand Basic machine DOWEL HOLE DRILLING MACHINE GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW, complete in standard design with: - Fully automatic electronic control with pulse operation via foot valve for clamping-drilling-releasing, electric intermittent operation. - Automatic retraction of the drilling unit after reaching the set drilling depth. - Automatic extension of the drilling hole depth when drilling on the end face. This eliminates the need to adjust the drilling hole depth from flat-face to end-face drilling (+10 mm, e.g. for a dowel length of 35 mm, drilling depth on the flat face 14 mm and drilling depth on the end face 24 mm). - 1 drilling bar with 21 spindles, pitch 32 mm, motor 1.5 kW (drilling feed 0-70 mm), incl. 21 quick-change chucks (Ganner system) for easy changing of the drill bits. - Easy pivoting of the drilling unit from 0° to 90°, supported by gas cylinders. - 1 clamping support movable in the Y-axis with 3 pneumatic clamping cylinders, for workpiece height up to max. 80 mm. - Ideal stop system consisting of: - 1 stop rail 1800 mm for drilling shelves (aluminum profile 40x40 mm) with 3 stop blocks, with quick-change system, easily interchangeable from right to left stop side for drilling shelves in carcass structures in mirrored fashion, also suitable for row drilling in the 32 system. - Side stops and position settings, as well as the position of the drilling height above the support table, are adjusted by means of mechanical digital counters. - Side stops can be easily pivoted away, for the shortest possible conversion from carcass to frame and row drilling. - Clamping arms for the clamping support des Ibedpfxjxnlflj Aggea

Condition: good (used), Code: 0347 Brand: CENTAURO Model: CO 800 - CE Standard Band saw with covered wheel for cutting wood materials, joinery, furniture, furnishings, window frames, plastics, aluminum, composite materials and various - CE Standard Technical data: Cast iron flywheel diameter mm 800 Max cutting height mm 520 Height of table from floor mm 960 Table dimensions mm 1170 x 800 Max blade length mm 5670 Motor Hp 5,5 Tilting work table Telescopic blade guard N° 2 suction inlets diameter 120 mm Ibsdeyxmm Ispfx Aggja Overall dimensions: mm 1550 x 850 x 2500 h Weight kg 630

Condition: excellent (used), Saw wheel diameter 800 mm Max. Cutting height 520 mm Max. Cutting width 780 mm Table height from floor 970 mm Iedpfjtrdk Djx Aggeba Table dimensions 1170×800 mm Max. min. belt length 5670/5540 mm Max. Belt width 45 x 0.7 mm

Condition: used, Year of construction: 1999, saw blade diameter 275 mm capacity 90 degrees: round 80 mm capacity 90 degrees: square 70 mm capacity 90 degrees: flat 100 x 60 mm capacity 45 degrees: round 70 mm capacity 45 degrees: square 60 mm capacity 60 degrees: flat 80 x 50 mm clamping range 110 mm turning speeds 45 / 90 U/min total power requirement 0,5 kW weight of the machine ca. 0,07 t Ibsdpfx Asl R Nnnjggsa dimensions of the machine ca. 900 x 700 x 1600 m Manual cold circular saw with: - Machine base - Support rail 1500mm

Condition: new, Year of construction: 2023, Power (KVA): 650 Ibsdpfx Agjwpgh Hjgja

Year of construction: 2010, condition: good (used), 2250mm pallet nailing line Semi-automatic nailing table Isdpfxepy H Ero Aggoba Turner + (optional marker) Stacker (3000mm maximum) Transfer

Condition: good (used), Swivel Spindle Milling Machine, Table Milling Machine, Bench Milling Machine -Spindle adjustment: height and angle -Swivel: -3° to 45° Ibedpfoh Nvyzsx Aggsa -Drive: 4.5/5.5 kW -Speed: 3000/4500/6000/9000/12000 rpm -Feed apparatus Holz-Her 3 rolls -Useful shaft length: 100 mm -Spindle: Ø 30 mm -Max. Milling cutter: Ø 220 mm -Dimensions: 1540/1100/H1520 mm -Weight: 962 kg

Condition: like new (used), Year of construction: 2023, operating hours: 2 h, Deutz TCD 4.1 L4 Deutz TCD 4.1 L4 EU Stage V / U.S. Tier 4 – EPA (115 kW) Charge air and water cooler Electronic direct injection / common rail Ijdpfx Ajyh A Iisggjba Extended idle automation with engine shut-off function ECO and Power mode Temperature-controlled fan drive with reversible fan Spatially separated high-performance cooling system Cooling system with temperature-controlled fan drive Reversible fan for hydraulic oil cooler Jump-start terminals on upper carriage Maintenance flaps, gas-spring assisted with closing aid Automatic central lubrication system, grease reservoir refillable from the ground Rear-view camera Side camera LED lighting package (equipment) LED lighting package (cabin) Stabilizer blade on the oscillating axle side, width 3m, with integrated cylinder protection Travel direction detection and steering direction reversal Electric steering lock for rigid axle All-wheel drive and all-wheel steering Dual-circuit brake system Powershift transmission Twin pneumatic tires, without intermediate rings 10.00-20 16PR (Trelleborg T900) Wireless tire pressure monitoring Automatic oscillating axle lock Front and roof protection grilles for timber handling machines Rigid cabin system (viewing height 4.00 m) Cabin privacy glazing (side and rear window) Single-pane safety glass Sliding window in cabin door Clear glass roof window Windscreen wiper-washer system (front) Low-frequency suspended comfort driver's seat incl. seat heating and seat ventilation with synchronized armrests / joysticks Joystick steering Automatic climate control Multifunction display Document clip Reach at stick pin: 13m at grab tip: 10.7m Near-field extension for loading stick Level monitoring for coolant and hydraulic oil Attachment filter system Pipe rupture valves for lift cylinder Pipe rupture valves for stick cylinder Basic overload warning system Quick-release coupling on loading stick Wood grab available on request: 1 or 1.25 m³

Condition: new, Year of construction: 2026, CORMAK PT310 Planer Thicknesser The CORMAK PT310 planer thicknesser is an advanced woodworking machine combining the functions of a surface planer and a thickness planer in one robust construction. It stands out with exceptional stability, high working power, and solutions designed to improve accuracy and operator comfort. It is a reliable tool for professionals who expect efficiency, durability, and repeatable precision when working with both hard and soft wood. Main advantages of the machine Powerful motor S6: 4.2 kW (S1: 3.0 kW) – one of the most powerful units in its class, ensuring stable performance even under heavy loads. Stable construction with a weight of 250 kg – rigid cast iron tables and additional rubber feet minimize vibration and improve machining accuracy. Quick change between operating modes – fast conversion from surface planer to thickness planer by lifting the tables and repositioning the chip extraction cover. High operating comfort – low noise emission and precise material guidance ensure comfortable and safe operation. Efficient dust extraction system – Ø120 mm extraction connection enables effective chip removal, especially during intensive use. Design and technology The PT310 is built on a massive frame with ground cast iron working tables, ensuring long service life and excellent rigidity. The main control elements, including the thickness planer table height adjustment wheel, are ergonomically positioned on the right side of the machine. Ibedpovxh Rvjfx Aggsa The tilting fence with a clear scale allows precise adjustment from 90° to 45°. Thanks to the solid guiding column of the thickness planer table, the machine provides repeatable accuracy across the entire working width. Precision and working efficiency The Ø75 mm cutter shaft equipped with three HSS knives measuring 310 × 25 × 3 mm rotates at 5500 rpm, allowing perfectly smooth surface finishing. The maximum planing width is 310 mm, while the thicknessing height range is 5–225 mm. The 6 m/min feed speed enables efficient processing of larger workpieces. The maximum cutting depth in surface planing mode reaches 4 mm, significantly reducing material preparation time. Applications Carpentry and furniture workshops – for everyday efficient processing of solid wood and glued panels. Production of structural elements – ideal for leveling and calibrating construction components, stairs, frames, and moldings. Technical schools and training workshops Standard equipment Three HSS knives, dimensions 310 × 25 × 3 mm Cutter head guard Cast iron surface planer tables Ø100 mm dust extraction outlet Feed switch and emergency STOP switch Polish-language operating manual (DTR) CE declaration of conformity Technical specifications Cutter shaft diameter 75 mm Cutter shaft speed 5500 rpm Dust extraction outlet diameter 100 mm Tilting fence angle range 90–45° Number of knives / dimensions 3 / 310 × 25 × 3 mm Maximum surface planing width 310 mm Maximum thickness planing width 308 mm Maximum planing height 5–225 mm Maximum thickness planing cutting depth 2.5 mm Maximum surface planing cutting depth 4 mm Thickness planer feed speed 6 m/min Surface planer table dimensions (L × W) 1300 × 310 mm Gross weight 250 kg Motor speed 2800 rpm Motor power S1: 3.0 kW / S6: 4.2 kW Power supply 400 V, 5-pin socket, 16 A Operating manual (DTR) Included CE declaration Yes