CNC INFOTEC Machining center Model: 2515

CNC INFOTEC Bearbeitungszentrum Modell: 2515

Condition: good (used), Year of construction: 1994, CNC Spiral bending machine, capacity 50cm3, min-max diam of coil 500-3.500mm. Hnodjiu Acpjpfx Addog

Condition: good (used), Year of construction: 1982, functionality: fully functional, type of input current: three-phase, MCS Jigger High Temperature 144ºC. Hodpofqmx Tjfx Addjng Type COMBY-JIGGER JP70. Year 1982. It underwent a complete renovation in 2002 Pressure: 3kg/cm2 Capacity: 9170 l Roller width 2,000 mm. Diameter of fabric 1100 mm. Diameter of rollers 324 mm. Additives tank.

Year of construction: 2011, condition: reconditioned (used), Boschert tool grinding machine EASY SHARP Equipped for Trumpf tooling system (Amada system optional) Machine for punching tool maintenance with cooling system and especially powerful motor, therefore also suitable for use with diamond grinding wheels. Used machine is currently being overhauled Equipment for Trumpf tooling system up to size III Accessories: Tool holder for punch flat and whisper Die holders for size I, II and III New corundum grinding wheel Dressing diamond Cooling system and machine base revised Technical data: Grinding wheel diameter 175 mm height adjustment 150 mm working area 400 x 150 mm motor power 2,2 kW Motor speed 2825 rpm Hjdpfxsid I T Is Addjng Optional adapter for Amada system available Pictures similar

Condition: excellent (used), Year of manufacture: 1991 Model: ITPS III Serial number: ITPS 80C 25 P1C226 Maximum pressing force: 1800 kN Working stroke: 115 mm Hnjdpfx Adjwq Dpqodjg Power supply: 415 V, 50 Hz, 3 phases Rated current: 119 A Installed power: 18.5 kW Machine weight: 4940 kg Inventory number: 9.14 Control: Delem DA-65R The machine starts up, but the control unit does not respond to commands. The previous owner replaced the original AMADA control with a DELEM unit.

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 5831, travel distance X-axis: 7,500 mm, travel distance Y-axis: 6,200 mm, travel distance Z-axis: 2,000 mm, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 80 m/min, rapid traverse Z-axis: 60 m/min, feed length X-axis: 7,500 mm, feed length Y-axis: 6,200 mm, feed length Z-axis: 2,000 mm, feed rate X-axis: 80 m/min, feed rate Y-axis: 80 m/min, feed rate Z-axis: 60 m/min, nominal power (apparent): 150 kVA, torque: 45 Nm, controller manufacturer: Fanuc, workpiece length (max.): 7,500 mm, workpiece width (max.): 6,200 mm, workpiece height (max.): 2,000 mm, workpiece diameter (max.): 6,200 mm, workpiece weight (max.): 50,000 kg, total height: 5,500 mm, total length: 12,800 mm, total width: 8,900 mm, table width: 6,200 mm, table length: 7,500 mm, table load: 50,000 kg, spindle speed (min.): 24,000 rpm, spindle speed (max.): 28,000 rpm, coolant supply: 8 bar, spindle motor power: 28,000 W, number of spindles: 1, number of slots in tool magazine: 32, input voltage: 380 V, type of input current: AC, operating speed: 80,000 mm/s, Equipment: documentation/manual, rotational speed infinitely variable, Table Dimension 6,840 x 4,400mm. Axis Travel 'X'=7,500mm, 'Y'=6,200mm, 'Z'=2,000mm, 'B'=±110°, 'C'=±300°. Rapid Traverse 'XY'=85m/min, 'Z'=45m/min, 'BC'=9,000°/min. Maximum Spindle Speed 24,000rpm (28 kW Motor). Spindle Taper HSK 63F. 16 x 2 Position Tool Racks. S/No. 5831 (2011). Hsdpju I Nzrjfx Addjng

Condition: refurbished (used), Year of construction: 2010, load capacity: 200 kg, arm reach: 2,400 mm, As PLC Merkezi, we can conduct custom engineering projects with our industrial robots in our stock like this example. We can help you with: - Welding - Cutting Hodpjq Dpxdofx Addeng - Machine Feeding - Palletising - Depalletising - Marble Processing - Apgant Machine Feeding and Metal Bending - And many other projects Brand: KUKA Model: KR200-3 Comp Condition: Refurbished with 1 year of warranty Version: V5.6.12 Year: 2010 Control Cabin: KRC2 ed 05 Rated Payload: 200kg Access Distance: 2400mm Included: Manipulator + Control Cabin + All Wiring Sets + Teach Pendant +1 Hertz Spindle Motor (New) + Delta Spindle (Set with the Mechanical System) + Tool Changer Table Not Included: 7th Axis, Engineering Design and Consultancy Shipping: NOT included in the price Payment: 100% payment before collection

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Hnjdpfxsflk Awe Addog Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: new, Year of construction: 2024, == Exhibition machine == ALZMETALL column drilling machine ALZSTAR 40 SV with coolant unit B (option 25) (consisting of separate tank (33l), pump with motor protection switch, complete fitting) and LED machine light Standard equipment: Mushroom pushbutton, reversing switch (for clockwise and anticlockwise rotation), motor protection switch Infinitely variable speed adjustment, digital speed display, feed overload protection, protection class IP54, connection plug Spindle protection with electrical fuse Technical data: Drilling capacity steel E335 (St 60) 40 mm Thread cutting: Steel E335 (St 60) M 24 Cast iron EN-GJL-200 (GG20) M 30 Short spindle MK 3 Spindle stroke 120 mm Projection 293 mm Column diameter 115 mm Machine table, usable support 514 x 360 mm T-slots, number x width x distance 2 x 14 x 224 mm Spindle-to-table distance min./max. 117/701 mm Feed rate 0.10 + 0.20 mm/rev Machine height without options approx. 1840 mm Net weight approx. 285 kg Drive stepless Motor 1500 / 3000 rpm Power 1.45 / 1.9 kW Hnedpfod Hy Elex Addog Spindle speed 160-2250 rpm

Condition: excellent (used), Year of construction: 2006, Technical Specifications: Press Brake: Model: AMADA HDS 1030 NT Working Length: 3100 mm Folding Width: 2700 mm Press Force: 100 t CNC Control: AMADA AMNC PC 3D-graphic 15-inch TFT Color Screen Controlled Axes: 7 Drive: Servo-Hydraulic Installation Height: 500 mm Motorized Adjustable Backgauge: 600 mm Thrust: 415 mm Hsdpfxowmw Acj Addong Stroke: 200 mm Working Height: 960 mm Motor Power: 9 kW Dimensions (Length x Width x Height): approx. 4300 x 2300 x 2950 mm Weight: approx. 8 tons Loading and Unloading Robot: Model: ASTRO-MP 20 Max. Capacity: 20 kg Number of Controlled Axes: 6 CNC control: AMADA AMNC II Drive: AC servo motor Bending robot: Model: ASTRO-100 NT CNC control: AMADA AMNC II Max. capacity: 20 kg Number of controlled axes: 5 Length of linear axis: 3080 mm Max. cutting size for sheet metal: 800 x 1000 mm Max. cutting size for profiles: 300 x 1800 mm Drive: AC servo motor The seller is not liable for typing or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Year of construction: 1992, condition: used, Plate heat exchanger for milk processing Hjdpfsh Eulgsx Addsng