Guillotine shear

COLGAR CM 4005

Condition: good (used), Year of construction: 1998, operating hours: 28,500 h, functionality: fully functional, travel distance X-axis: 420 mm, travel distance Y-axis: 330 mm, travel distance Z-axis: 240 mm, spindle speed (max.): 5,000 rpm, VMC 300 Siemens 810D control SK40 Iiodpfswlpb Usx Apnsb 12 tool positions In good condition Fully functional

Condition: good (used), Year of construction: 1995, machine/vehicle number: 0540/98, functionality: fully functional, Manufacturing number: 0540/98. Year of manufacture: 1998 ,. Capacity: 400 tons. Stroke length: 300 mm. Stroke: 10-40 / min. Slide adjustment 300 mm. Installation height: 700 mm. The table measures 1600 x 1300 mm Net weight: 45 tons. Isdpfx Aoicbbzspnsib Gable opening: 1600 mm. Exterior dimensions 2 x 3 x 6 meters. Control system MEAB. Coil feeder / straightener iRON RNE 50B / 11. Decoiler iRON SA6000 max 700 mm.

Condition: good (used), Year of construction: 2006, 1 used 4-axis horizontal machining center Brand Haas Type EC 1600 Year of manufacture 2006 Travel ranges X-axis 1626 mm Y-axis 1270 mm Z-axis 813 mm Spindle centerline to table 304 mm Iijdpfx Apjv N Di Asnob Spindle SK 50 Max. rated power 22.4 kW Max. speed 7500 rpm Max. torque 460.0 Nm 700 rpm Table size Length 1626 mm Width 914 mm T-slot width 16.00 mm T-slot center-to-center distance 125 mm Number of T-slots in standard configuration: 7 Max. load capacity on table (evenly distributed) 4536 kg Integrated 4-axis (B-axis) Table 1626 mm x 813 mm mm Clamping surface diameter 762 mm Adjustability 360° Max. workpiece swing diameter 1270 mm Table load 4536.0 kg Max. rated power 3.7 kW Rotational torque (continuous) 2712 Nm Backlash 30 arc-sec Gear ratio 500:1 Braking torque 5423 Nm Minimum resolution 0.001° Indexing accuracy ± 30 arc-sec Repeatability 15 arc-sec Rapid traverse rate on B axis 36°/sec Max. feed rate for machining on B axis 36°/sec Spindle centerline to table 146 mm Max. feed rate for machining in x, y, and z axes 12.7 m/min Rapid traverse rate on X axis 15.2 m/min Rapid traverse rate on Y axis 15.2 m/min Rapid traverse at Z 15.2 m/min Axis motors 30-station tool changer Max. tool diameter (full) 102 mm Max. tool diameter (adjacent positions empty) 254 mm Max. tool length 508 mm Max. tool weight 13.6 kg Tool-to-tool (average) 8.00 s Chip-to-chip (average) 12.60 s General information Coolant tank capacity 360 L Dimensions Domestic pallet 488 cm x 366 cm x 346 cm Export crate 488 cm x 366 cm x 348 cm Weight 13608.0 kg

Condition: new, Year of construction: 2024, Bending force: 320 t Year of construction: New (delivery time 6-8 weeks) Control: DT 15 bending length: 3050 mm distance between the columns: 2600 mm Y Fast speed: 160 mm / s Y Working speed: 10 mm / s Y Retraction speed: 140 mm / s Motorized crowning table length: 630 mm table width: 154 mm table height: 900 mm stroke: 365 mm Projection: 410 mm 2 support arms 2 Backgauge fingers Travel speed X-axis: 250 mm / s R-axis working speed: (max.) 140mm / s R-axis travel: 250 mm Standard equipment: Y1, Y2, X (3-axis) Y1, Y2, X = 650 mm (double guide, aluminium) Software D-BEND for 3D bending simulation and alignment Ijdpfx Asfifg Hspnsib Manual crowning R axis, manual Backgauge with motor, linear guide and ball screw Backgauge with height adjustment (R-axis, manual) CE-die holding system (upper dies) Front support arms for sheets, sliding (with T-channel and stops) Hydraulic blocks and valves in special design, according to the worldwide applicable standards Electrical equipment, in accordance with the standards applicable worldwide Option: CE standard with manual fussler AKAS II M -FPSC-B-C (SAFETY PLC) CNC motorized crowning Y1, Y2, X, R (4 axes) CNC motorized crowning Engine power 37 kW Oil tank capacity 250 lt length 4300 mm Width 1820 mm Height 3230 mm Weight approx. 17250 kg

Condition: used, Year of construction: 2006, functionality: fully functional, travel distance X-axis: 1,060 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller model: Ultimax, total height: 2,800 mm, total length: 2,200 mm, total width: 2,400 mm, table width: 610 mm, table length: 1,270 mm, spindle motor power: 18,000 W, number of spindles: 1, number of slots in tool magazine: 24, Equipment: chip conveyor, documentation/manual, 3 axes Iedpfjwtdzrjx Apnoib Tool holder SK 40 Internal coolant 35 kVA approx. 7550 kg Comprehensive tool package available separately

Condition: as good as new (ex-display), Year of construction: 2008, machine/vehicle number: LSP 100T, Productions-Hydraulic press with H-column 100t with guidance Manufacturer: Stenhoj Denmark Year of construction: 2008 Pressure force max. 1,000 kN / 318bar Press cylinder, stroke length: 400mm Press table with T-slot 1,500x900mm above 1,500x1,050mm below Stand passage 1,700mm Condition as good as new, the machine was only used for test runs and has been in stock since then. All statements without guarantee. Without transport costs. Iijdpfog Rn Efjx Apnob

Condition: used, Year of construction: 2014, operating hours: 14,950 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Exclusive use in plastics processing – no heavy-duty machining, no steel, stainless steel, or titanium processing; resulting in reduced wear on the spindle, guides, ball screws, and rotary axes. Technical data: Control: Heidenhain iTNC 530 HSCI Travel distances: Iijdpsy Smm Uofx Apneb - X-axis travel: 600 mm - Y-axis travel: 500 mm - Z-axis travel: 500 mm Main spindle: - Speed range: 20 – 18,000 rpm NC rotary table: - Table clamping surface: 600 x 500 mm - Loading capacity: 400 kg - B-axis: -5° to +110° - C-axis: 360° Tool holder: HSK-A63 Chip conveyor: not shown, but available. Operating hours: approx. 50,320 h Spindle hours: approx. 14,950 h

Condition: excellent (used), MIKRON HPM 800 U is a 5‑axis machining center for precision, high accuracy and reliability. Table 630×440 mm, 5 T‑slots, table load 800 kg; travels X800 Y800 Z550 mm; A +91/‑121°, C 360°. HSK‑A63, spindle‑nose to table 600 mm; 115 tools, Ø max 80 mm (160 free), tool length 350 mm. Spindle 0–20000 t/min; feed 0–20000 mm/min; rapid 45 m/min; accel. 6 m/s; max feed force 6000 N; 3×400V 50Hz; 55 kW; weight ~15000 kg; size 3505×3100×2980 mm. Accessories: high‑pressure coolant, paper filtration, 2 pallets, touch probe, laser tool preset, chip conveyor. Suited to tight tolerances in automotive, aerospace, medical, watchmaking. Iedpeyxn E Sjfx Apneib

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 1114.3705-24, Used CNC Lathe Make: Boehringer Type: VDF 250Cm Year of Manufacture: 1997 VDF Boehringer 250C The machine has the following features: 1000mm turning length No tailstock Driven tools Special indexing chuck Siemens 840C control system The Boehringer VDF 250Cm is a CNC lathe designed for machining chucked parts. It is characterized by its robust construction and precise machining capabilities. Iodpfxewlap Ao Apnsib Technical Specifications (Model Year 1997) Working Area: Swing over Bed: 550 mm Swing over Cross Slide: 480 mm X-Axis Travel: 405 mm Z-Axis Travel: 1,099 mm Maximum Turning Length: 1,000 mm (None) Tailstock: Tool Turret: Number of Positions: 12 Tool Holder: VDI 50 DIN 69880 Live Tools: YES Spindle: Spindle Head Size: 8 DIN 55026 Spindle Bore: 103 mm Max. Chuck Diameter: 315 mm Max. Drive Power (50% Duty Cycle): 53 kW Max. Torque: 780 Nm Speed Range: 30–3,000 rpm Feeds: Automatic Feeds: 1–10,000 mm/min Rapid traverse speed: 10 m/min (X and Z axes) Max. feed force: 15 kN Dimensions and weight: Machine dimensions (L × W × H): approx. 5,400 × 3,200 × 2,400 mm Machine weight: approx. 11,000 kg Equipment: Pivoting control panel Hydraulic system from HYDROKRAFT Coolant system with 600 l tank, max. pump pressure 5.5 bar, flow rate 60 l/min, pump power 1.1 kW Chip conveyor with 325 l tank capacity, right-hand discharge 3-jaw power chuck Oil mist extraction Control cabinet with cooling unit and temperature controller from RITTAL Control system: SIEMENS SINUMERIK 840 C Variants and Differences There are various variants of the VDF 250 series, such as the VDF 250 CU, which can be equipped with different control systems (e.g., PHILIPS B2T) and technical specifications. Some models feature driven tools and a tailstock, while others are designed as pure chuck-type lathes without a tailstock. Conclusion The Boehringer VDF 250 Cm is a versatile CNC lathe characterized by its stability and precision. With its robust construction and extensive features, it is ideally suited for machining chucked parts in a variety of production environments.

Condition: ready for operation (used), Year of construction: 2008, Ernault Somua CNC Lathe 1400x8000 CNC system Fanuc 21i TB Maximum turning diameter: 1400 mm Maximum workpiece length: 8000 mm Iiodpfx Apsyly Nbonjb Maximum turning diameter over cross slide: 1100 mm Spindle diameter: 235 mm Maximum workpiece weight: 25,000 kg Motor power: 75 kW Video of the machine under power available!