Universal Milling Machine

CORMAK MFM320

Condition: reconditioned (used), Year of construction: 2002, functionality: fully functional, grinding length: 600 mm, grinding width: 400 mm, grinding height: 400 mm, grinding wheel diameter: 300 mm, table load: 400 kg, grinding wheel width: 50 mm, overall weight: 3,600 kg, ELB Perfekt 6, year of manufacture 2002, grinding area 600 x 400 mm, grinding wheel 300 x 50 mm, 4 kW spindle power, automatic grinding cycle, roughing, finishing, spark-out, lifting, dresser mounted on spindle head with compensation. The machine has been professionally overhauled by us and now meets the geometry of a new machine. The grinding spindle has new bearings. Accessories: electro-permanent magnetic clamping plate 600 x 400 mm, water tank with paper filter unit. All functions have been tested and the machine can be demonstrated under power at our facility. We are also happy to handle on-site installation and training, as well as future servicing. Financing/leasing is available; we will be pleased to provide an offer! Lsdjxdalfepfx Amnjaa

Condition: new, 4th axis incl. control for: Milling, grinding, testing/measuring; engraving IDEAL also for "machines in training" Lasdpsrxcu Sjfx Amnsa Technical data: Center height: 110 mm Spindle nose: HSK 63 taper, outer ø 70 mm 0/-0.005 mm Clamping torque: 250 Nm Concentricity and axial run-out: 0.006 (optional: 0.003 mm or 0.002 mm) Max. transport load: (limited by motor) without support: 40 kg (only if turntable is bolted down) with support: 80 kg Total weight, approx.: 25 kg Version: - Stepper motor - motor-dependent, backlash-free toothed belt drive including correct pre-tensioning - With automatic spindle clamping with 6 bar compressed air - Fully sealed to IP 67 - Sensor system with LEDs, data logger and microprocessor, e.g. for status monitoring and display - Service display - Data history for root cause analysis - Remote diagnosis - Axis signals 'Limit+ / Limit -' (e.g. for swivel axis) - Data output via USB slot - Alignment sliding blocks 14h6, 1 pair - Alignment sliding blocks 18h6, 1 pair Cable set 3m: - All cables and hoses routed in quality protective conduit - Pre-assembled, all cables shielded in accordance with regulations, incl. matching plugs Accessories / options: - ControlTablet - quality tablet with Mutlitouch, Windows 11Pro; software pre-installed - QuickControl software - "professional" range of functions; smallest display unit-0.0001°; 2 outputs, 6 inputs - QuickConnect - Direct cable connection to the machine control unit

Condition: used, spindle diameter 90 mm x-travel 700 mm y-travel 500 mm Control Heidenhain Lodsxwzg Repfx Amneaa bore capacity in steel 40 mm spindle taper MK 4 bore spindle stroke 170 mm spindle turning speed - stepless 10-2.000 U/min ll diameter 230 mm table dimensions 900 x 770 mm vertical travel of crossrail-slide 630 mm boring spindle 6 Stück/ 0.02-0.20 U/min distance between columns 900 mm Passage between spindle and table 815 mm spindle drive 4 PS total power requirement 380 V weight of the machine ca. 3,9 t In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: good (used), Year of construction: 1982, travel distance X-axis: 900 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 45 rpm, quill stroke: 80 mm, quill diameter: 100 mm, total height: 2,000 mm, total width: 1,900 mm, total length: 2,000 mm, table width: 350 mm, table length: 1,250 mm, table load: 400 kg, overall weight: 2,100 kg, Universal Milling Machine, gear type, swiveling and tilting head, feed range X/Y/Z 900/270/450 mm, table size 1250x350 mm, motor 7,5 KW, 12 speeds 45-2000 rpm., ISO 40, quill travel 80 mm, digital readout on 3 axis, automatic and rapid feeds, horizontal milling device, coolant system, dimensions 1900x2000x2000 mm, weight ca. 2100 kg; accessoires into cabinet Lsdeyly Drspfx Amnsaa

Condition: used, Year of construction: 2009, Control: Heidenhain TNC 320 Table Clamping surface: 1200 x 450 mm T-slots: 6 x 18 H7 mm Max. load: 400 kg Feeds Longitudinal travel: 650 mm Cross travel: 510 mm Vertical travel: 475 mm Feed: stepless Rapid traverse X, Y: 4000 mm/min Rapid traverse Z: 1500 mm/min Feed motor AC (Z): 3.0 (10.5) Nm Spindle Speed range, stepless: 55 – 3000 rpm Spindle taper: ISO 40 Spindle gearbox: frequency controlled, 2-stage Spindle motor: 7.5 kW Swiveling head: 0 - 140° Dimensions Length: 2200 mm Lajdox H Iyrspfx Amnea Width: 1800 mm Height: 2000 mm Weight Net weight: 2100 kg Gross weight: 2300 kg

Condition: not inspected (used), Year of construction: 1968, functionality: unexamined, machine/vehicle number: 70013, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 32 rpm, controller manufacturer: HEIDENHAIN, No minimum price – guaranteed sale to the highest bidder! Bidding obligates you to collect the item within the specified period between 08.04.26 and 16.04.26! TECHNICAL DETAILS X-axis travel: 400 mm Y-axis travel: 300 mm Z-axis travel: 300 mm Spindle speed range: 32 to 1600 rpm Table dimensions: 590 x 430 mm Jaw width: 160 mm MACHINE DETAILS Laodpeyk Ufnofx Amnea Control system manufacturer: HEIDENHAIN Dimensions & Weight Dimensions (L x W x H): 2500 x 2000 x 1800 mm Machine weight: 1500 kg EQUIPMENT Three-axis digital readout Workshop drawer cabinet with matching accessories External reference: 14

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, controller model: PHILIPS, jaw width: 125 mm, Equipment: documentation/manual, No reserve price – guaranteed sale to the highest bidder! Bidding is binding and requires timely collection between 08.04.26 and 16.04.26! TECHNICAL DETAILS Travel X-axis: 400 mm Travel Y-axis: 400 mm Travel Z-axis: 300 mm Table dimensions: 550 x 280 mm Jaw width: 125 mm Tool holder: SK 40 MACHINE DETAILS Control: PHILIPS Operating voltage: 380 V Frequency: 50 Hz Control voltage: 220 V Rated current: 50 A Dimensions & weight L x W x H: 3000 x 2000 x 1800 mm Ledjyk Thujpfx Amneaa Machine weight: 1500 kg EQUIPMENT Table with 4 T-slots Mounted vise Documentation External reference: 12