Wide belt sander

COSTA LEVIGATRICI K7CCCFF 1350

Condition: like new (used), Year of construction: 2011, DMC USK 1350 M3 wide-belt sander - Italian production - transverse aggregate so-called sergeant - year of production 2011 - electric and pneumatic ionizer TECHNICAL PARAMETERS: grinding width 1350 mm grinding height 4-170 mm minimum workpiece length 365 mm vacum table 1 aggregate: transverse tape, the so-called sergeant engine power 12 kW 2nd aggregate: rubber shaft hardness of 95 shore diameter 240 mm engine power 18.5 kW 3rd aggregate: rubber shaft hardness of 55 shore shaft diameter 300 mm engine power 15 kW 4 aggregate: pneumatic shoe engine power 15 kW 5 aggregate - cleaning brush - 2.2 kW 6 aggregate - blowing blowing on the tape pneumatic oscillation feed speed 2.5 - 18 m / min pneumatic straps tension electric height adjustment Bljdsgr Er Sepfx Aczsr spigots diameter 3 x 200 mm, 8 x 80 mm, 2 x 160 mm, 1 x 150 mm transport dimensions (length / width / height) 370/250/250 cm weight 5000 kg

Condition: good (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 437.0COLIBRI, power: 8 kW (10.88 HP), compressed air connection: 6 bar, input frequency: 50 Hz, input voltage: 380 V, operating pressure: 6 bar, workpiece width (max.): 630 mm, Well-maintained wide belt sander available Bsdpfjuh Sccox Aczelr 2 rollers for pre-sanding and fine sanding 2 feed speeds Electrically adjustable height with digital readout Sanding width: 630 mm 2 extraction ports Assistance with loading can be provided.

Year of construction: 1997, condition: good (used), - Working width (mm): 1300 - CSD system - Cross sanding unit - Longitudinal sanding unit - Shoe - Brush unit - Ionization Blodpfxsidi Ive Aczor

Condition: refurbished (used), Year of construction: 1988, functionality: fully functional, Löser centerless tube grinding machine - belt grinding machine - polishing machine - Cylindrical grinding machine Centerless tube grinding / polishing machine for workpieces with a minimum length of 1100mm. The machine was built in 1988 and was completely overhauled in 2012. The machine was converted for polishing and then only polished around 10,000 parts. The machine was no longer used after that. During the general overhaul, the motors, bearings and the entire control cabinet with the frequency converters were completely replaced. The machine can be used for both wet grinding and polishing. Wastewater treatment including pumps is not yet available. We can retrofit these for you free of charge according to customer requirements. The transport systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. Bljdpfspugwijx Aczjr The machine can process pipe diameters from 10mm to 160mm. The grinding motors / polishing motors have an output of 7,5kW per station. The system can be viewed by appointment in our warehouse in D-63128 Dietzenbach.

Condition: excellent (used), Year of construction: 2020, We offer: Deburring machine Manufacturer: Viet Type: SV3-4.3 RVXR Year of manufacture: 2020 Technical specifications and features: - Sanding belt change on the left side of the machine. - Tool set - Digital thickness display - Material too thick at the inlet - Electro-pneumatic oscillation control - Air filter with condensate separator and automatic drain - Maintenance-free pneumatics - Pneumatic lifting and lowering when switching the units on and off - Machine with head adjustment (fixed working height 900 mm) - Lifting system on 4 columns (spindle) with chain drive - Table extensions at the front and rear, each with 1 roller - Industry 4.0 (LAN) package with LAN connection to the network - Working width: 1350 mm - Machine with movable head - Centesimal lifting system with inverter - Useful working height 160 mm - LED lighting inside the machine - Electronic belt control for the longitudinal units Blodpfx Acev Hxrgszor - Calibration sanding unit with sanding roller diameter 190 mm, belt length 2620 mm - Electromechanical grit set - The speed of the sanding unit can be adjusted using the frequency converter The sanding belt can be adjusted. - V-Spin unit with 15 disc sanding system / diameter 80 mm The V-Spin unit consists of 15 disc brushes arranged in a row and moving in opposite directions. The combination of these two movements makes the V-Spin unit suitable for rounding sharp edges and removing slag or oxides. - 16 backing pads for V-Spin units, diameter 80 mm Scotchbrite + 80 grit abrasive - 16 backing pads for V-Spin units, diameter 80 mm Tampico + 80 grit abrasive - X-Spin unit / sanding system with 15 discs / diameter 123 mm The group consists of 5 rotating heads with 3 pads of rotating sanding brushes (diameter 123 mm) inserted inside each head. - Oscillating Scotch-Brite brush - Linear cleaning systems - Conveyor belt Feed speed 1.1 kW (1.5 HP) Speed 0.5-7 m/min Conveyor belt made of HYPALON rubber, heat- and oil-resistant, hardness 60 SH with a smooth surface - Belt cleaning fan for the conveyor belt including suction - IPC MONITOR 15" touchscreen control for operating the machine, up to a maximum of 10 processing units. The control manages the following processes: - Start sequence of the selected drive motors - Storage of 1,000 processing programs - Automatic positioning of the working thickness regulator - Acoustic and visual indicator when the machine starts up - Operating hour meter - Automatic control of the feed speed depending on the processing performance (expressed in square meters). This allows for a longer service life of the sanding belt based on the statistics. The machine is in very good condition and is used for 2 Euro pallets. New sanding belts included. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in technical data and information, as well as prior sale.

Condition: as good as new (ex-display), Year of construction: 2012, machine/vehicle number: 925625, Kuka unused stock item KUKA VKR210 R2700 Year of construction : 03/2012 load capacity 210 kg reach 2700mm weight 1412 kg Serial number :: 925625 With connection cable: X21/X31 (00-108-948) 25m and X20/X30 (00-104-744) 25m Control cabinet KRC2 ED05 Serial number: 93863 Weight: 203Kg Year of manufacture: 12/2012 Teach panel 00-107-264 VKRC2 used, fully functional / serial number: 0000562 Robot data: Repeatability: ± 0.06 mm Axis 1: ± 185º Axis 2: -140 ° / -5 ° Axis 3: -120 ° / 155 ° Axis 4: ± 350 ° Axis 5: ± 122.5 ° Bsdjrdh T Dspfx Aczelr Axis 6: ± 350 ° Movement speed of the robot in º / s Axis 1: 105 ° / s Axis 2: 107 ° / s Axis 3: 114 ° / s Axis 4: 136 ° / s Axis 5: 129 ° / s Axis 6: 206 ° / s

Year of construction: 2001, condition: excellent (used), I sell bottom grinder Costa A1 ACT 1150, year 2001. Cylinder configuration with soft electronic segmented pad. Working width 1150mm. Belts 1180x2620mm Press rollers for short work pieces. Fan for vacuum.included. Air blower for both units. Blsdpfx Acsgq U R Nszsr Total weight 2500 kg. 2 motors 7,5 kW and 15 kW total power 27 kW Very good condition, serviced machine. Available immediately.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, working width: 1,350 mm, Costa calibration machine Bedpfx Ajwmxh Tsczslr

Condition: excellent (used), COSTA LEVIGATORS Series S model SN 5-groups Bedpfxjr Iyvmo Aczolr first group electronic sectioned transverse belt second group 1 roller third group 1 roller fourth group electronic sectioned pad super finisher fifth group electronic sectioned transverse belt machine width 1350 vacuum inverter on all belt groups inverter on belt outfeed brush group blower group on outlet

Condition: good (used), Year of construction: 2004, I sell the 3-axis CNC working centre Biesse Rover 24L with beam table, year 2004. Configuration: 3-axis main spindle HSD recently full reconditioned / Water cooled RS1600 Tool magazine 7 positions ISO30 on working head 1 grooving saw X-direction Drilling head 14+4+2 spindles Useful working area 4500x1330mm. 2 working fields, 4 clamping areas Bljdeh Txlcspfx Aczor Automatic central system of lubrication. Total power 35kW XDNC 2.01 software controller with full instructions. Pump Becker 250/300 m3/h. 5,5KW. Additional vacuum outputs for raster works or connection of additional clamping devices. Good condition. Available immediately. Repair needed: Handles on beam table, rotation of the ISO30 magazine on working head