Used Dehumidifier for sale (57)

Condition: used, Compressed Air Refrigeration Dryer, KAESER Type TA 5 Serial No. 2143, Item No. 1.7917.2, Year of manufacture 2002 Throughput: 600 liters/min. Operating pressure: max. 16 bar Refrigerant: R134a Charge weight: 0.28 kg Compressed air connection thread: 3/4" Power consumption: 250 Watts Power supply: 230 Volts, 50 Hz, 2 Amps - Condensate drain: DN 6 mm Space requirement (L x W x H): 630 x 500 x 780 mm Weight: 70 kg Ncjdpfx Aoy Ra Dwohzot In good condition

Condition: excellent (used), Year of construction: 2009, The new cold-regenerating adsorption dryer from Parker Zander combines proven and reliable elements of adsorption technology and impresses with its clear design. Key features of the K-MT series adsorption dryers, such as: • one-piece adsorber profiles • separately controlled main and discharge valves in a leak-free design • compact check valve combination, guarantee continuous operational reliability and high availability. All K-MT series adsorption dryers feature: • self-cleaning screen trays on the wet side • high-quality desiccants During adsorption, the desiccant stores the moisture contained in the compressed air. Parker Zander uses exclusively highly active, high-capacity molecular sieve desiccant. This desiccant guarantees a long service life at high inlet temperatures or low pressure dew points. Regeneration takes place in the opposite direction to adsorption. A portion of the dried compressed air is depressurized to atmospheric pressure and passed through the desiccant bed to be regenerated. The moisture stored during adsorption is carried away with the partial flow of dry regeneration air. The regeneration air requirement of 14.3% for cold-regenerated adsorption dryers is based on: Operating pressure 7 bar Inlet temperature 35°C Pressure dew point -40°C for a cycle with: - 5 minutes of adsorption - 4 minutes of desorption - 1 minute of pressure build-up The Parker Zander 10-minute cycle, with 5 minutes of adsorption, includes 12 load cycles per hour. The standard 6-minute cycle, with 3 minutes of adsorption, requires 20 load cycles per hour and therefore inevitably 5.6% more regeneration. The Parker Zander 10-minute cycle saves energy costs with reduced wear. Multitronic, the control system with groundbreaking new functions and a new design, is perfectly tailored to the K-MT series of cold-regenerating adsorption dryers. It allows for highly effective adaptation of the adsorption dryer to even the most diverse operating conditions. From the continuously visible status to the pressure dew point control of the adsorption dryer, the benefits for the operator are readily apparent with Multitronic. Housed in a clear and easily accessible control cabinet, the Multitronic system offers: • user-friendly microprocessor control for all Parker Zander Heatless dryer systems • flexible cycle time settings. • Front-panel LEDs for individual functions such as: - Operation - Adsorption - Desorption • Selector switch I-0-2 for fixed cycles or variable cycles as synchronization with the compressor Optional features: • Direct pressure dew point measurement including digital display • A potential-free output for the pressure dew point limit • The ability to set the desired dew point in the range of -25°C to -40°C Technical specifications: K-MT 8 Capacity m³/h: 72 Ncodpfxoypb Duj Ahzst Connection: G ½ Pressure bar: 16 Weight kg: 77 Electrical connection watts: 50 Year of manufacture: 2009 Manufacturer's price: €8,880 "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de You can find more items – new and used – in our shop! International shipping costs on request!

Year of construction: 2011, condition: good (used), warehouse no.: 503260 type / device: dehumidifying dryer manufacturer: Amboss+Langbein type: Sektionaltrockner H150 year of construction: 2011 The sectional dryers from Amboss+Langbein can be used for energy-saving, stationary and mobile drying. Thanks to the modular system from Amboss+Langbein, the drying system adapts individually to operational requirements and can be implemented in the smallest of spaces. Also available with material station and vacuum system if required. The dryers work with dew point control and energy-saving heat exchangers. Depending on the production requirements, the air throughput is regulated between 140 and 400 m³/h by process control. Each drying boiler has an individual temperature control. A separate scanning of the material to be dried prevents over-drying and insufficient drying Drying due to excessive material removal. Properties: Fully insulated drying container made of V2A stainless steel Sectional multi-boiler system Each dryer boiler individual temperature control Ncodpfx Aox Eifkshzet Continuous drying Automatic air volume measurement Patented throughput recording and adapted drying Protection against overload and overdrying Dew point controlled (-60 °C tested) Process air control Batch drying Energy-saving heat exchanger Extreme drying of compressed air for electronic component manufacturing

Condition: like new (used), Year of construction: 2022, overall weight: 250 kg, BOGE DS 350 refrigerant air dryer Nsdpfx Ajxcb Edehzjct

Condition: new, Electric dehumidifier/construction dryer for commercial use. For drying rooms, dehumidifying cellars, etc. and for drying e.g. concrete, masonry, plaster, screed. Refrigeration unit with rotary piston compressor and capacitor motor 230 V, 50 Hz, 900 W, with electronic defrosting, for continuous operation. Very quiet operation. Dehumidification capacity max. 50 l/24 h, air volume max. 265 m3/h. Electronic control unit with illuminated large control panel and memory function. Electronic hygrostat. Air filter. Internal 7.7 l condensate container. In sturdy plastic housing with castors. In cardboard box. Dehumidification capacity: ≤ 50 l/24 h Nodpfetty Raex Ahzsct Air volume: ≤ 265 m³/h

Condition: new, Electric dehumidifier/construction dryer for commercial use. For drying rooms, dehumidifying cellars, etc. and for drying e.g. concrete, masonry, plaster, screed. Refrigeration unit with rotary piston compressor and capacitor motor 230 V, 50 Hz, 1200 W, with automatic hot gas defrosting system, for continuous operation. Very quiet operation. Dehumidification capacity max. 80 l/24 h, air volume max. 850 m3/h. Electronic control unit with illuminated 3"" display and memory function. Electronic hygrostat, operating hours counter, power consumption counter. Air filter. In a sturdy sheet steel housing on a mobile tubular steel frame with large wheels. In cardboard box. Condensate container not included (see accessories below!) Dehumidification capacity: ≤ 80l/24h Air volume: ≤ 850 m³/h Super offer: When you buy a REMS Secco 80 set, you will receive 1 REMS Detect W humidity measuring device free of charge. You save an additional 233.55 euros. The offer is valid until 31.12.2024 Njdouy Thmspfx Ahzsct

Condition: like new (used), Year of construction: 2012, Atlas Copco CD 70+ adsorption dehumidifier YOM 2012 Capacity: 4,200 l / min Pressure dew point: -40 ° C Pressure drop: 0.16 bar Maximum operating pressure: 14.5 bar Filter sizes: DD / PD 60 - DDp 60 Weight: 120 kg Dimensions: 550 (L) × 364 (W) × 1479 (H) mm Nodpfxoyzaams Ahzjct inlet air temperature: 35 ° C ambient temperature: 25 ° C operating pressure: 7 bar

Condition: new, ME-LINE - Air-Cooled Dehumidifiers are used for drying air of up to 100% relative humidity (RH) with temperatures from +45 ºC and above. EU-LINE - Air-Cooled Dehumidifiers are used for drying air of up to 100% relative humidity (RH) with temperatures from -30 ºC to +40 ºC. Rust is the adversary of freshly blasted steel; high air humidity combined with low steel temperatures creates ideal circumstances for moisture condensation onto the recently blasted surface. Condensation rust is a major cause of early coating failure. By lowering relative humidity, the Proton dehumidifiers are designed to give the best climatic conditions for blasting. Nodpfjkw Ukujx Ahzjct Climate conditions across the world vary considerably from chilly and humid in Western Europe, warm and humid in the Far East, to hot and humid in the Middle East. Various types of technology can be employed in the dehumidification process; certain dehumidification technologies are more successful than others in dealing with specific climatic conditions. Each Proton dehumidifier is built to the highest quality standards and comes with regional certification. The heart of the humidifier is a very efficient and robust metal silicate rotor. The rotor contains a vast number of air channels, running parallel to the shaft, which ensures a large internal surface for adsorbing water vapour. The rotor is not affected by over saturation. Therefore, the PROTON dehumidifier’s rotor can resist long time storage at high humidity without loosing capacity. The PROTON dehumidifiers have been developed especially for corrossion protection in connection with sandblasting and painting operations to protect materials and to avoid moisture problems, meeting the following conditions: •Avaliable in sizes from 1.000m³/h to 18.000m³/h dry air. •Avaliable in pre-cooled and after-cooled versions for warm climates. •Robust design with steelframe, eyebolts etc. •Vital parts can easily be maintained and exchanged. •Large air inlet grills and filters. •Can be built into containers for protection. •Adjustable dehumidifying capacity and outlet air temperature in 4Grades. •Outdoor and indoor use. •Dry air pressure up to 1200 Pa. Technical. Spec.: Dehumidifiers differs between 1.000m3/h - 18.000m3/h.PROTON Dehumidifiers decrease the Relative Humidity (RH) from 90% to %10-15. Dehumidifiers are capable to remove 100lt water per hour.

Condition: used, functionality: unexamined, For sale: Air Dryer Type FD 120 3x380/415V; 50Hz Serial no. 302210 Njdpoyutnpefx Ahzjct Net price: EUR 1,100 negotiable.

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, overall weight: 128 kg, ambient temperature (max.): 46 °C, pressure (max.): 13 bar, MACHINE DETAILS Weight: 128 kg Max. air pressure: 13 bar Ncodpfx Aheydnyxozst Max. ambient temperature: 46 °C

Year of construction: 2014, condition: like new (used), REFRIGERATION DRYER AIRPRESS APX 30 CAPACITY 3 M3/MIN, Ncjdpji Atudefx Ahzot YEAR OF PRODUCTION 2014 THE DEHUMIDIFIER IS FULLY FUNCTIONAL.

Condition: excellent (used), Year of construction: 2015, Refrigeration dryer BOGE DS 95 Nedpfx Ajk Nb T Dshzjct Capacity 9.5 m3/min year of manufacture 2015, THE DEHUMIDIFIER IS FULLY FUNCTIONAL.

Year of construction: 2021, condition: like new (used), For sale Food Dryer - Dehumidifier. Used a few times. Max. indoor temperature: 60 degrees Celsius. Nedpjibwb Tjfx Ahzjct Flow rate: 4500 m3/h Shell for products: 25 psc. Power required: 220V 50Hz More parameters in photos. If you have an questions on this, please do not hesitate to contact us.

Condition: used, Year of construction: 2010, TA 5 compressed air refrigeration dryer, with a volume flow of up to 0.60 m³/min. Refrigerant: R134a Additional title: Compressed air dehumidifier Volume flow: 600 l/min. Overpressure: 16 bar Power: 0,29 kW Current: 2,0 A Voltage: 230 V Nodpsw Tduwsfx Ahzoct Frequency: 50 Hz Position: free standing

Year of construction: 2003, operating hours: 20,000 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 20794, The system enables: * the removal of various types of pollutants, such as whole oils and/or emulsifiable oils, the technical data sheets for which must be checked before any order is placed in order to avoid incompatibility with the product used. In any case, systems operating with Soltene (Super-stabilised Tetrachloroethylene) must not be used with oils containing active sulphur or high percentages of chlorinated paraffins; the presence of such contaminants must be highlighted by the user in order to identify specific cleaning solutions. Ncsdpfxjy Udclj Ahzet • to clean any type of metal or different alloys (ferrous steels, stainless steel, brass, aluminium, copper, bronze, etc.) without them undergoing oxidation or colour changes. * Removal of “chips” from blind holes, carried out by immersion in the “Soltene” solvent combined with the action of high-pressure jets of the same solvent. * to carry out washing cycles with “Soltene” solvent in hot, cold and vapour phases in the pre-set sequences and timeframes, using pressure jets and/or immersion, depending on individual requirements. The parts are dried with hot air in a dehumidified environment. * to use fresh “Soltene” solvent in every wash cycle, which is essential for achieving consistent wash quality over time, regardless of the quantity and quality of the material being treated, as well as the quantity and quality of the contaminant removed from the material itself.

Condition: good (used), Year of construction: 2017, machine/vehicle number: API262376, overall weight: 279 kg, volume flow: 150.6 m³/h, pressure (max.): 12.75 bar, Equipment: refrigerant dryer, type plate available, We offer: ATLAS COPCO GA15VSDFF PLUS Technical data: YEAR: 2017 CAPACITY (kW): 15 Nodpfxjv Drrbs Ahzsct OUTPUT (m3/min): 2.51 CIS (bar): 12.75 HOURS (DOC/GENERAL): 25107 INVERTER: yes BUILT-IN DEHUMIDIFIER: yes

Condition: excellent (used), Year of construction: 2008, COMPRESSOR KAESER M122 9.5m3 10BAR DEHUMIDIFIER!! Mobile compressor KAESER M122 machine with built-in air dryer (aftercooler) after full service Technical data: capacity: 9.50 m3/min; working pressure; 10 Bar; year of manufacture 2008; engine; DEUTZ mileage 2715 h compressor fully functional, we provide service Below is a link to the video Ncjdpfx Ajq Nz A Rohzet

Condition: new, Airpress Aps 7,5KW oil compressor NEW COMPLETE. Screw compressor APS 10 Combi Dry X 10 bar 7.5 kW 920 l/min 500 L machine NEW HP / kW: 10 / 7.5 Number of compression stages: 1 Capacity at 10 bar (l/min): 920 Refrigerant: Air Drive: Direct Start-up: Y-∆ Tank capacity (l): 500 Dehumidifier: 230 V / 50 Hz / 1 Ph Length, Width, Height (mm): 1670 x 700 x 1660 Weight (kg): 380.00 Safety features: Safety button Display: Monochrome Sound level dB(A): 63 Air connection: 3/4" net price: 19500 zł Ncodpfx Ajq D Dcnohzot gross price: 23985 zł

Condition: new, Year of construction: 2026, A set containing THEOR 20 INVERTER screw compressor, N20S refrigeration air dryer. The screw compressor of the Polish brand CORMAK THEOR series is the most modern solutions used in pneumatics in combination with the use of high-quality materials and components. Low operating costs, ease of use, ergonomic and solid construction as well as high efficiency of the device guarantee effective and trouble-free operation. Additional double filtration on the dehumidifier! KIT INCLUDES: Ncedpfx Ahjmqlqdszst THEOR 20 COMPRESSOR with inverter (version equipped with inverter) REFRIGERATION AIR DRYER N20S The set does not include a tank! Possibility to buy additional cylinders THEOR 20 COMPACT technical parameters Compressor Engine power 15kW Dehumidifier Engine power 0.69kW General parameters Capacity at 6 bar 1800 lpm Capacity at 8 bar 1700 l/min Capacity at 10 bar 1600 l/min Departure G3/4" The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, overall weight: 4,500 kg, number of axes: 3, This 3-axis AGIE Challenge 2 eCut wire EDM machine was manufactured in 2006. It offers precision electrical discharge machining capabilities, ideal for detailed and intricate metal work. Consider the opportunity to buy this AGIE Challenge 2 eCut wire EDM machine. Contact us for more information about this machine. Additional equipment • Wire System: Wire diameter 0.1-0.33 mm, Wire speed 60-300 mm/s, Wire tension 0-25 N, Wire spool up to 25 kg, Threading system up to 250 mm height, nozzles 1 mm and 2 mm Machine Benefits Technical Machine Benefits • Max workpiece dimensions (wxdxh): 750 x 550 x 250 mm Ncodpfxsx D Sb Ee Ahzot • Axis travels u/v: ±70 mm • Positioning speeds: manual (x/y) 30°/100 mm, programmable (x/y) exc “a” 0. 9 m/min, cha/exc “d” 3 m/min, u/v/z 0. 6 m/min • Compressed air: Ø 7 mm, 6-8 bar, 5 m³/h, filtered, dehumidified, unlubricated • Cooling water: ≤ tune level -7°c, 20 l/min, 1. 5-3 bar Extra Information Machine still under power

Year of construction: 2015, condition: ready for operation (used), injection weight: 2,424 g, This Husky HPETL230E-RSE95D-95 was manufactured in 2015. It is an all-electric injection molding system with a maximum throughput of 390 kg/h PET and a max shot weight of 2424 g PET. The clamping unit is fully electric with a toggle drive, and it features an integrated control system for additional equipment. Consider the opportunity to buy this Husky HPETL230E-RSE95D-95 electrical injection moulding machine. Contact us for more information about this machine. Additional equipment Nodox D Hvwopfx Ahzsct • Mold Dehumidifier: Incl. hood, spare parts package, piping • Conveyor Belt: Two-sided preform filling system for cartons/grid boxes Machine Benefits Technical Machine Benefits • The package includes two machines along with additional components such as pellet silos, pellet feeder, discharge system for foreign bodies in pellets, dosing unit for color, and platform. Everything seen in the pictures is included. • Max throughput: 390 kg/h pet • Clamping unit: fully electric with toggle drive • Clamping platen: movable, guided on rollers • Type: split version • Dryer: dr815ht-g3 with 4000-liter drying hopper (stainless steel, insulated) • Husky 1: 3 tools - 28 gauge muzzle, 17. 8/26/30. 3 grams • Husky 2: 2 tools - 38 gauge muzzle, 18/29 grams Extra Information Clamping Force Clamping Unit: Fully electric with toggle drive Clamping Platen: Movable, guided on rollers Control Unit Control System: Integrated control system for additional equipment Display for Mold Cooling Water Temperature/Pressure (Flow and Return) Control Output for Color Dosing Unit Lubrication System: Automatic Post-mixing Device: Integrated in the nozzle Tools 48-cavity H-PET Injection Mold Preform Weight: 17.8 g and 30.26 g Punch Size: 50 x 140 mm Includes: 3-position removal plate, basic spare parts package 32-cavity H-PET Injection Mold Preform Weight: 18 g and 29 g (38 mm Bericap) Punch Size: 63.5 x 140 mm Includes: 3-position removal plate, basic spare parts package Functions Temperature Monitoring and Setting Continuous Level Meter Variable Dew Point Setting Conveying: Hot transport of the granulate via vacuum unit P07 to the booster hopper (HAD400) Paint Mixing Units For Solid Paint: Volumetric, 4 dosing screws For Liquid Paint: 4 dosing pumps Preform Production Specifications Preform Weight: 17.80 g Mouth: PCO1881 LW Length: 89.35 mm Wall Thickness: 3.06 mm Base: 2.30 mm Shape: Bell Cavities: 48 Cycle Time: 12.4 ±0.3 s Preforms per Hour: 13935 Annual Production (95% availability): 111205000 Throughput (kg/h): 248 Power Consumption: 506 Wh/kg PET Preform Weight: 29.00 g Mouth: Bericap 38 Length: 108.59 mm Wall Thickness: 3.16 mm Base: 2.42 mm Shape: Bell Cavities: 32 Cycle Time: 13.7 ±0.3 s Preforms per Hour: 8409 Annual Production (95% availability): 67101000 Throughput (kg/h): 244 Power Consumption: 532 Wh/kg PET Preform Weight: 18.00 g Mouth: Bericap 38 Length: 82.04 mm Wall Thickness: 2.70 mm Base: 2.20 mm Shape: Bell Cavities: 32 Cycle Time: 11.3 ±0.3 s Preforms per Hour: 10195 Annual Production (95% availability): 81353000 Throughput (kg/h): 184 Power Consumption: 506 Wh/kg PET Preform Weight: 30.26 g Mouth: PCO1881 LW Length: 122.30 mm Wall Thickness: 3.00 mm Base: 2.30 mm Shape: Grade Cavities: 48 Cycle Time: 14.7 ±0.3 s Preforms per Hour: 11755 Annual Production (95% availability): 93805000 Throughput (kg/h): 356 Husky1 PCO 1881 30,3g 1-1,5l PCO 1881 26,0g 1-1,5l PCO 1881 17,8g 1-1,5l Husky2

Condition: used, Year of construction: 2018, Overview  This complete brewhouse and cellar system was manufactured between 2018 and 2021 by several European equipment suppliers including Brewiks, Milan Svoboda, Mercabrewers, Wild Goose, Quantor and others. It features a 5 HL Brewiks brewhouse, a 12 HL fermentation cellar (6 CCTs), CIP stations, a canning line, labelling and coding units, water treatment, air treatment, chiller and full malt-handling equipment, being a turnkey solution for beer production. Technical data  Brewhouse (Brewiks 500, 2018) Capacity: 5 HL Heating: Electric, 36 kW Fermentation Cellar (Svoboda + Mercabrewers, 2018–2021) 6 CCTs × 12 HL useful capacity Pressure rating: 3 bar CIP Stations (Svoboda CIP 100) 2 mobile CIP units Tank capacity: 100 L (alkaline + acid) Canning Line (Wild Goose GOSLING, 2021) Semi-automatic Formats: 0.33 L / 0.44 L / 0.50 L Cooling (Quantor Chilly MAX 50L) Glycol chiller for CCTs General Key Information Power supply (various units): 230–400V, 50 Hz Applications: Brewing, fermentation, can filling Scope of Delivery  Brewiks Brewery (5 HL) | Brewiks | Brewiks 500 | 2018 | Electrically heated (36 kW) Isobaric CCT | Milan Svoboda | — | 2018 | 12 HL, 3 bar (1/3) Isobaric CCT | Milan Svoboda | — | 2018 | 12 HL, 3 bar (2/3) Isobaric CCT | Milan Svoboda | — | 2018 | 12 HL, 3 bar (3/3) Isobaric CCT | Mercabrewers | — | 2021 | 12 HL, 3 bar (1/3) Isobaric CCT | Mercabrewers | — | 2021 | 12 HL, 3 bar (2/3) Isobaric CCT | Mercabrewers | — | 2021 | 12 HL, 3 bar (3/3) CIP station | Milan Svoboda | CIP 100 | — | Mobile; 100 L alkaline + 100 L acid (1/2) CIP station | Milan Svoboda | CIP 100 | — | Mobile; 100 L alkaline + 100 L acid (2/2) Hop Cannon + Bag Filter | 3M | Series ME 01MET2 | — | 30 L capacity Glycol cooler | Quantor | Chilly MAX 50L | — | Operational, heavily used Canning line | Wild Goose | Quick Change GOSLING | 2021 | Semi-automatic; incl. formats 0.33 / 0.44 / 0.50 L Can Rinser + Gravity Feeder | Zomerdijk Engineering | TWIST Rinser | — | For 0.33 / 0.44 / 0.50 L Labeler + Printer | EME (Crafted Goose) | Jem-110-S2 | — | Automatic; integrated printer Thermal inkjet printer | Rynan | R20 (CM220) | — | Batch and date printing Air compressor | ABAC | 50 Hp2 | 2020 | 10 bar; 50 L tank Dehumidifier | ABAC | COOL21 (CO) | — | 16 bar; 350 L/min Reverse osmosis system | AquaControlada | — | — | 2 units (drinking & process water) Water tank | ROTH | — | — | 2× 750 L Malt mill | Sommer | Maltman 220 | — | Precision mill Sieve shakers + sieves | RETSCH | AS200 Basic | — | Complete sieve set for malt analysis Nsdpfx Aheyb R Iaezoct

Condition: used, New compressed air refrigeration dryer, unused compressed air dryer from stock Compressed air dehumidifier SMC type IDFA3E-23 Compressed air dryer, compressed air dehumidifier Serial No.: PP0213S Year of manufacture: 2011 SMC compressed air dryer IDFA size 3E Flow rate per hour: 12,000 liters/h (12 m³/h) Flow rate per minute: 200 liters/min. Operating pressure max. 10 bar Operating pressure: 0.15 to 1.0 MPa (manufacturer's specification) Refrigerant: R134a Temperature range: 5°C to 50°C Power consumption: 180 watts Power supply: 230 volts, 50 Hz, 1.2 amps Connection pipe thread: 3/8" - Stainless steel heat exchanger, air-cooled condenser - Condensate separator with automatic drain - Condensate drainage via hose Space required (L x W x H): 410 x 226 x 473 mm Weight: 18 kg Ncjdpfx Ahoyif I Ujzot New, unused, in mint condition from stock

Year of construction: 1999, condition: good (used), Granule dryers, compressed air dryers, continuous dryers, granule drying systems -Manufacturer: digicolor, Granule dryer type Dehumidifying Dryer -Model: DT 204 M -Power: 10000 W -Side channel blower: Siemens Elmo-G 1.5 kW -Individual components: see photos -Dimensions: 1020/610/H1550 mm -Weight: 241 kg Njdpjlb Iv Njfx Ahzsct

Condition: used, Year of construction: 1979, 31.5 MV power transformer, 110 kV / 10.5 kV with tap changer (19 steps), with expander, Buchholz relay, dehumidifier, switching group Yy0, Njdpfxerk Nrto Ahzect transformer book available