Projection welding machine

DALEX PMS 34-4

Condition: used, Year of construction: 2021, saw blade diameter: 800 mm, rotational speed (min.): 1,450 rpm, power: 5.5 kW (7.48 HP), Crosscut saw AS Very good, well-maintained condition Saw blade diameter 800mm. Sturdy tubular steel base frame. Powerful saw motors. Ffodpfxsd Szf No Aa Esw Pneumatic material clamps (3 vertical). 2-hand safety operation. Coolant device. Protective hood. Optionally with length measuring system or automatic positioning system. Version as automatic saw-drilling machine or automatic saw-punching machine on request.

Year of construction: 2012, condition: ready for operation (used), An Autobond laminating system for sheet-shaped and heat-resistant products is available. Laminating speed: 60m/min, min. sheet dimensions X/Y: 285mm/320mm, max. sheet dimensions X/Y: 1060mm/1060mm, paper thickness range: 90g-650g/m², min. laminating film thickness: 24µm, max. roller pressure: 6t, max. temperature pressure water unit/control: 140°C/135°C. Machine dimensions X/Y: approx. 4000mm/1600mm, weight: approx. 2000kg, operating hours: 28785h. Documentation available. An on-site inspection is possible. Fedpoxbrw Uofx Aa Ejfw

Condition: new, pressure 25 t throat 200 mm stroke 4 - 80 mm table surface area 520 x 400 mm no. of strokes 160 Hub/min ram surface 160 x 160 mm ram adjustment 40 mm ram hole 32 H7 mm hole in the table 200 x 150 mm clamping plate 500 x 380 x 60 mm total power requirement 2,7 kW Ffedsb U Hwpopfx Aa Eow weight of the machine ca. 1,9 t dimensions of the machine ca. 1,3 x 1,0 x 1,85 m

Condition: good (used), Year of construction: 1992, Favretto MB 130 – Technical Specifications Machine type: tangential (horizontal) surface grinding machine Year of manufacture: 1992 Table size: 1700 × 400 mm Magnetic chuck size: approximately 1300 × 400 mm Magnetic plate height: 40 mm Longitudinal travel (X-axis): 1380 mm Cross travel (Y-axis): 450 mm Vertical travel (Z-axis): 550 mm Distance between spindle center and table surface: 203 mm (min) to 753 mm (max) Grinding wheel dimensions: 400 mm diameter × 152 mm width × 100 mm bore Spindle speed: approximately 1400 rpm Fodpfx Aajt Rwvzs Esfw Longitudinal feed rate: 2000 to 40000 mm/min Cross feed rate: 50 to 3000 mm/min Vertical feed rate: 700 mm/min Grinding head motor power: approximately 15 kW Total installed power: approximately 25 kW Maximum table load without magnetic chuck: approximately 1500 kg Maximum table load with magnetic chuck: approximately 1205 kg Overall grinding capacity (L × W × H): approximately 1500 × 600 × 550 mm Machine weight: approximately 7100 kg

Condition: used, sheet width 250 mm coil outside dia. 1400 mm weight max. in kg 2500 kg Ffedofn Aqmjpfx Aa Ejw plate thickness 2 ... 4 mm straightening feed 2,5 ... 15 m/min coiler: expanding range mm total power requirement 1 + 4 kW weight of the machine ca. 1,8 t dimensions of the machine ca. m decoiler, MHR 250/4: max. coil diameter: 1400 mm coil diameter inside: 450 - 530 mm unbraked decoiler with pressure roller straightening machine, MR 250/4: Belt infeed height: 1250 mm The system was dismantled, checked and repainted.

Condition: new, Year of construction: 2026, machine/vehicle number: SÇ 402 Alttan Çıkma Kesim Makinası, functionality: fully functional, • Compliant with CE standards. • Used for cutting aluminum and PVC profiles. • Hydro-pneumatic cutting operation. • Adjustable cutting speed according to the profile. • Capable of cutting at fixed angles to the right and left: -60, -45, -30, -22.5, -15, 0, +15, +22.5, +30, +45, +60 degrees. • Pneumatic vertical and horizontal clamps. • Ø550 mm diamond-tipped aluminum saw blade. • Equipped with roller conveyor (3 meters right and left). • Oil spraying system. • Enables precision cutting thanks to the 3 kW motor and Hydro-check. • For use with a digital measuring meter. Fedorahzgjpfx Aa Eofw

Year of construction: 2010, condition: ready for operation (used), Electrode force: 100daN, welding capacity: 255kVA, nominal input: 80kVA, with Cooling System DALEX DRF 5.2. Fedpfx Aajiknv Eo Eefw

Condition: new, Year of construction: 2024, The Durma HD-TC 60220 pipe laser stands for maximum precision and efficiency in the processing of pipe materials. With its impressive maximum pipe diameter of Ø220 mm and the ability to cut both square profiles of 160 x 160 mm and rectangular profiles of 200 x 100 mm, this pipe laser offers exceptional flexibility for a wide range of applications. Thanks to the advanced automatic loading system, which can handle tubes up to Ø170 mm in diameter, and the ability to process materials up to 6500 mm in length, the HD-TC 60220 is ideal for projects that require fast production with consistently high quality. The minimum material length for automatic loading is 3000 mm, which further increases the efficiency of the machine and reduces processing time. Max. Tube diameter: Ø220 mm Laser power: 3 kW Max. Dimensions of the square profile: 160 x 160 mm Max. Dimensions of the rectangular profile: 200 x 100 mm Min. pipe diameter: 20 mm (12 mm with manual loading) Max. Tube diameter for automatic loading: Ø170 mm Max. Profile dimensions for automatic loading: 150 x 100 mm, 120 x 120 mm Max. Material length: 6500 mm Min. material length for automatic loading: 3000 mm Length of the last piece: 4000 / 6000 mm Unloading length: 150 mm Max. Material weight per meter: 52 kg/m Max. Material weight (total length): 340 kg Ffjdpfxsq Tpkyo Aa Esw Max. Loaded weight: 3000 kg Profile types: Round, Square, Rectangular, Elliptical Types of open profiles: L, U

Condition: new, - Saw blade 550 mm - double miter - 2 pneumatic clamps - Hydrocheck system - mist lubrication system - Roller conveyor with longitudinal stop - blow gun - protective cap - documentation Fedpfxogg Nyro Aa Ejfw - 400V

Condition: good (used), Threaded snowing machine Hahn and Goebel HG 12E Spindle rotation 180-900 rpm 380v Fedpfxod Rkbrs Aa Eefw MaschNr.1917/16 M4-M65