Tool Room Milling Machine - Universal

DECKEL FP 4 A

Condition: used, Year of construction: 1985, Technical details: x-travel: 485 mm Ffsdpfx Abeu Ndcmsmet y-travel: 385 mm z-travel: 380 mm control: Contour 1 Bahnsteuerung spindle taper ISO: SK 40 spindle head swivable left - right: 90° ° quill travel: 80 mm milling head vertical adjustable: 150 ( y-Achse) mm range of revolution per miute: Spindel vertical: 50 - 2.500 / 18 step U/min feed:: X/Y/Z: 2 - 1000 steples mm/min rapid traverse : X/Y/Z: 2000 mm/min revolution per minute: horizontal: bis 1.000 U/min Table dimensions: 460 x 800 mm table load: 0,4 t total power requirement: 9,5 kVA machine weight approx.: 1900 kg dimension machine xH: 2,35 x 2,2 x 2,0 m -Equipment: - Operation via control panel Grundig elektronic with boom - Cooling with pump - machine lighting - Linear interpolation, circular polarization in XY and XZ planes - quick chuck - manual control unit *

Condition: good (used), Year of construction: 1972, turning diameter over bed 330 mm turning diameter over slide rest 200 mm turning length 800 mm Ffsdpfxowwl Izo Abmjt total power requirement 3 kW weight of the machine ca. 800 kg dimensions of the machine ca. 1,9x0,7x1,2 m turning speed range 24-2800 U/min

Condition: like new (used), Year of construction: 1985, functionality: fully functional, travel distance X-axis: 580 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, rotational speed (max.): 4,000 rpm, controller model: Contour 1, NC Milling Machine Deckel FP4A We are offering for sale a perfectly maintained Deckel FP4A CNC milling machine (very low operating hours, in as-new condition)! Technical Details: - Travel (X): 580 mm - Travel (Y): 400 mm - Travel (Z): 450 mm (390 mm*) - Table size: 460 x 800 mm - Spindle speed range: 40 – 4000 rpm - Feed rate: 2 – 3600 mm/min - Rapid traverse: 4.0 m/min - Spindle taper: SK 40 - Machine dimensions (LxWxH): approx. 3.0 x 2.10 x 2.10 m - Spindle drive power: 4.0 kW - Control: Contour 1 Description: CNC-controlled tool milling machine, equipped with Contour 2 control. Features include a vertical head rotatable +/- 90° with quill travel of 80 mm, horizontal spindle, power feeds & rapid traverse on all 3 axes, hydraulic tool clamping, flying desk, electronic handwheel, automatic central lubrication, coolant system, safety emergency stop, chip tray, and separate electrical cabinet. The machine is in top working condition. Note: This additional information is standard for this model. Please always verify the exact configuration during inspection. The DECKEL FP4A Universal Tool Milling Machine, built in 1985, is a classic and highly versatile metalworking machine renowned for its precision and flexibility – testament to Deckel’s strong tradition of engineering quality. The FP4A features a robust bed-type construction, delivering the necessary stability for precise milling tasks. Its universal tool milling head is a highlight, enabling a wide spectrum of operations—from basic drilling to complex contouring and profiling. This versatility makes it a valuable asset in tool and die manufacturing, as well as mold making. Key technical features of the 1985 DECKEL FP4A include a generously sized worktable, infinitely variable spindle speed adjustment, and an intuitive control interface for efficient programming and machine operation. The advanced CNC technology contributes to exceptional accuracy and operator convenience. Despite its age, the DECKEL FP4A continues to be a trusted solution for applications requiring flexible tool milling. Its reputation for reliability and precision makes it an essential tool for modern metalworking and manufacturing operations. Deckel’s legacy of quality and innovation in the field of metal machining is clearly evident in this model. Fedpfx Absxzpwfjmjft

Year of construction: 1987, condition: ready for operation (used), Travel X/Y/Z: 560mm/500mm/450mm, tool holder: SK40, speed: 4000rpm, feed rate: 3.6m/min, rapid traverse: 4m/min, table dimensions X/Y: 530mm/900mm, max. table load: 450kg. Machine dimensions X/Y/Z: 2350mm/2200mm/2000mm, weight: approx. 2200kg, control: Deckel Contour 2. An on-site inspection is possible. Fjdpfxjxvddvj Abmsft

Condition: used, Year of construction: 1982, machine/vehicle number: 18613, KUNZMANN universal tool milling machine model UF 6 NR Ffodpfx Abjiqkc Ijmjt year of manufacture 1982, 2 gear speeds 1400/2800 rpm, table size 860x240mm, 3 T-slots 14mm, spindle mounting SK30, travels: X/Y/Z=450/200/430mm, speeds horizontal: 18 steps from 32-1342 rpm, vertical: 18 steps from 72-2988 rpm, 12 feeds in X-axis, separate coolant tank, chip catcher, machine light, 3 horizontal milling arbors each with cutter, 2 top beam milling arbor bearing blocks, 1 collet element with key. 1 piece machine vice with crank

Condition: repair required (used), Year of construction: 1989, functionality: limited functionality, machine/vehicle number: 2821-0457, Equipment: documentation/manual, Machine was functional until we moved it. Now a control problem, control cannot be switched on is I think a small thing. Documentation is available! Tool holder needs to be straightened, concentricity is no longer great. Ffjdpfx Abou It A Temjt

Condition: used, Year of construction: 1985, machine/vehicle number: 2204 - 0469, x-travel:580 mm y-travel:400 mm z-travel:450 (390*) mm table-size:460 x 800 mm spindle speeds:40 - 4000 U/min feed range:2 - 3600 mm/min feed:4.0 m/min spindle taper:SK 40 dimensions of the machine ca.:3,0 x 2,10 x 2,10 m spindle motor:4,0 kW Ffjdpfx Abjcxxwaomot control:Contour 2 The Deckel FP4 A Universal Milling Machine - CNC - Spilndle Head can be swiveled 90 ° (Right or left) - Angular Fixed Work Table: 800 x 460 mm - Hydralic Tool clamping system SK40 with Pull studs DIN 2080 or DIN 69872 - Portable Handheld operating unit for easy control of machine - 4.0 kw Motor for Main Spindle. - Central Lubrication and Coolant system, Seperate Power cabin - Chip tray with Splash protection offering More clean and safe working envoirnment.

Condition: used, Year of construction: 1988, x-travel 0600 mm Ffsdpfxsu Rt I Ij Abmet y-travel 450 mm z-travel 450 mm quill stroke 80 mm table-size 1000 x 400 mm spindle turning speed range 20 - 3000 U/min spindle taper SK 40 feeds - automatic programming 1 - 4000 mm/min rapid traverse 6 m/min control Philips 432 power capacity 12 kW total power requirement 15 kW CNC control Philips 423, V-head swivelling, coolant pump, hydraulic tool clamping, autom. central lubrication, machine light, with protection cabin, diverse accessories.

Condition: used, Year of construction: 1992, machine/vehicle number: 2821-1444, See pictures for condition. More detailed information about the machine will follow shortly. Ffjdpfxetgkd Rj Abmjt

Condition: used, Year of construction: 1986, machine/vehicle number: 2204-0929, x-travel:560 mm y-travel:500 mm z-travel:450 / 390 mm quill stroke:80 mm feed:2 - 3600 mm/min table surface area:800 x 460 mm spindle turning speed range:40 - 4000 U/min spindle taper ISO:ST40 spindle head swivable left - right:+/- 90 ° control:Contour 2 Fjdpfx Abocxxriomeft total power requirement:4,0 kW weight of the machine ca.:2,8 t dimensions of the machine ca.:2,0 x 2,5 x 2,2 m The Deckel FP4 A Universal Milling Machine - CNC - Spilndle Head can be swiveled 90 ° (Right or left) - Angular Fixed Work Table: 800 x 460 mm - Hydralic Tool clamping system SK40 with Pull studs DIN 2080 or DIN 69872 - Portable Handheld operating unit for easy control of machine - 4.0 kw Motor for Main Spindle. - Central Lubrication and Coolant system, Seperate Power cabin, Chip tray

Condition: excellent (used), Year of construction: 1977, grinding diameter 350 mm grinding length 1000 mm centre height 100 mm grinding wheel diameter 360 mm total power requirement kW weight of the machine ca. 3,8 t dimensions of the machine ca. 3,5 x 1,3 x 1,5 m Machine in very nice condition, external + internal spindle, Fedpfsunt Eyex Abmsft many accessories.