Milling machine

Deckel FP3 LV Typ 2309

Condition: like new (used), Year of construction: 2013, functionality: fully functional, Universal milling machine Deckel FP2 repowered by FPS built in 2013 with 3-axis digital readout Heidenhain ND 780 As good as new !!! Technical data: Dodpfx Asvbifgjbuecc >> Machine no. 2202-7020 FPS no. 3364 Year of construction 2013 >> Rigid angle table >> Speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Drive power .:2.2 KW >> Travel X/Y/Z: 400/200/400 mm >> Equipment: Vertical & horizontal spindle >> Vertical quill and horizontal quill extendable - SK- 40 >> Tightening system S20x2 >> Weight approx. 1100 kg Accessories and equipment: >> 3-axis digital readout Heidenhain ND 780 >> Brake motor with immediate spindle stop >> Central lubrication >> 2 x emergency stop >> Operating instructions >> Coolant device To the machine : We offer a universal milling machine Deckel FP2 repowered by FPS in mint condition. The Deckel is equipped with a brake motor for immediate spindle stop. The machine has an electric central lubrication system. With two emergency stop switches for safety. Mechanically and electrically tested as of 2013. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out the lids under power on site. The machine is available immediately.

Condition: new, Year of construction: 2025, Completely refurbished machine, as new, modernized to the legally prescribed "state of the art" safety standard in accordance with the safety regulations of the employers' liability insurance associations. Switch cabinet electronics Installation of a new CE - control cabinet according to the current legal regulations of the professional associations BGVA 3 / DIN-EN 60204-1 new machine standard. Optionally complete machine in CE execution. A CE declaration of conformity is issued for the machine. With this FPS Werkzeugmaschinen GmbH acts as manufacturer. The machine fulfills the requirements of the BETRIEBS-SICHERHEITSVERORDNUNG- Betr.SichV. The year of manufacture corresponds to the date of delivery of the machine. EN ISO 12100, EN ISO 13857, DIN EN 13128:2009-09, EN ISO 13850, EN ISO 13849, EN 60204-1 Control system 3-axis - FPS Active - digital display Speed 25 - 2500 rpm geometrically stepped direct gear with 18 speed steps for maximum torque / milling power Feed rate 5 to 500 mm/min, infinitely variable rapid traverse 1,2 m/min quill Extendable quill, vertical 100 mm SK40 with M16 tightening thread optional: with DECKEL - saw thread S20 x 2 Extendable quill, horizontal approx. 100mm Axes X/Y/Z 800/300/400 mm Table rigid angular table 1000x440mm, load 2000kg Equipment - Vertical and horizontal spindle - Milling head manually tiltable +/- 90 °. Options - Z-axis bellows Dedsh Sptnopfx Abuocc - chip tray - machine light - central lubrication - universal table - rotary table - Shaper head - dividing head - counterholder - etc.

Condition: good (used), Year of construction: 1994, functionality: fully functional, feed length X-axis: 1,050 mm, feed length Y-axis: 360 mm, feed length Z-axis: 500 mm, travel distance X-axis: 1,050 mm, travel distance Y-axis: 360 mm, travel distance Z-axis: 500 mm, overall weight: 3,000 kg, Equipment: documentation/manual, Tiger FO 135 universal milling machine Description of the machine The machine was purchased new in 1994 and has only been in operation for a few hours. The milling machine is fully functional. The axis movements are smooth and the guides are in good condition. good condition. These have an automatic lubrication system. The table is in good condition and shows hardly any signs of wear. The machine also has a digital readout for the 3 axes, which makes it possible to work with cutter compensation and recurring measurement machining. Operating instructions are included with both the machine and the digital indicator. Technical specifications - Table dimensions 1,400 x 340 mm, 4 T-slots - Automatic traverse path: ➢ Longitudinal X 1,050 mm ➢ Transverse Y 360 mm ➢ Vertical Z 500 mm - Fixing the spindle cone: ➢ Vertical axis ISO 40, automatic locking ➢ Horizontal axis ISO 40, manual locking - Spindle speed range: ➢ Vertical axis 33 ÷ 1,560 rpm, 12 speeds ➢ Horizontal axis 35 ÷ 1,550 rpm, 12 speeds - Installed power: ➢ 5 kW vertical spindle motor ➢ 7.5 kW horizontal spindle motor ➢ Direct current motor 15 Nm - Variable power supplies Continuous speed 0 ÷ 1,500 mm/min - Fast feed ➢ Lengthwise and crosswise 3,000 mm/min Vertical 1,500 mm/min - Universal head with manual shaft lowering of 80 mm - Automatic lubrication with pump - Low-voltage electrical controls on the pushbutton panel of the side arm - Star/delta start - Magnetic thermal protection from Siemens - Net weight 3,000 kg - Machine dimensions (for transportation) ➢ Width 2,300 mm ➢ Depth 2,900 mm ➢ Height 2,400 mm Accessories - Counter supports for cutting shaft - Cutting shaft ø32 mm Tiger FO 135 universal milling machine Description The machine was purchased new in 1994 and has only had a few hours of operation. The milling machine is fully functional. Axis movements are smooth and the guides are in good condition. These have an automatic lubrication system. The table is in good condition and shows hardly any signs of wear. The machine also has a DRO for the 3 axes, which offers the possibility of working with milling compensation and recurring measurement processing. Both the machine and the DRO come with operating instructions. Technical specifications - Table dimensions 1,400 x 340 mm, 4 T-slots - Automatic travel: ➢ Longitudinal X 1,050 mm ➢ Transverse Y 360 mm ➢ Vertical Z 500 mm - Fixing the spindle cone: ➢ Vertical axis ISO 40, automatic locking ➢ Horizontal axis ISO 40, manual locking - Spindle speed range: ➢ Vertical axis 33 ÷ 1,560 rpm, 12 speeds Horizontal axis 35 ÷ 1,550 rpm, 12 speeds Dcsdpfx Aerqwbisbuec - Installed services: ➢ 5 kW vertical spindle motor ➢ 7.5 kW horizontal spindle motor ➢ DC motor 15 Nm - Variable power supplies Continuous speed 0 ÷ 1,500 mm/min - Fast forward ➢ Longitudinal and transverse 3,000 mm/min ➢ vertical 1,500 mm/min - Universal head with manual shaft lowering of 80 mm - Automatic lubrication with pump - Low voltage electrical controls on side arm push button panel - Star/delta start - Magnetic thermal protection from Siemens - Net weight 3,000 kg - Dimensions of the machine (for transport) Width 2,300 mm ➢ Depth 2,900 mm ➢ Height 2,400 mm Accesories - Counter supports for cutting shaft - Cutting shaft ø32 mm

Condition: excellent (used), Year of construction: 2006, turning diameter 330 mm turning length 750 mm control WEILER D3 dia. of quill 50 mm quill stroke 130 mm taper in tailstock-quill MK-3 spindle turning speed range 1-4500 U/min taper in main spindle MK-5 weight of the machine ca. 1400 kg dimensions of the machine ca. 1900 x 1300 x 1800 mm This WEILER E30x750 is in very good condition and can be viewed by arrangement with the seller. - Lever quick-release chuck for pressure collets DIN 6343-48/173E and Rubber-Flex collets, clamping range 3-42 mm diameter, with mechanical and electrical locking, max. speed 4500 rpm. - 1 set of pressure collets DIN 6343-48 / 173E - Adjustable hollow spindle stop 38-48 mm for main spindle Dcjdpfx Abox Szpwsujc - Live steady with sliding jaws, passage 10-85 mm - Three-jaw chuck with wedge bar system, diameter 160 mm, bore 42 mm, with mounting according to DIN 55027 /5, with 1 set of basic jaws and hard reversible attachment jaws - Lever quick-action chuck for pressure collets DIN 6343-48/173E and Rubber-Flex collets, clamping range 3-42 mm diameter, with mechanical and electrical locking, max. speed 4500 rpm. - 1 set of pressure collets DIN 6343-48 / 173E - Adjustable hollow spindle stop 38-48 mm for main spindle Translated with (free version)

Condition: used, Motor output 3 kW total power requirement 3 kw Dedpfx Asv Nq Skjbuecc Weight 1.400 kg

Condition: used, Technical details: x-travel: 600 mm y-travel: 300 mm z-travel: 360 mm range of revolution per miute: max horiz. 40- 2000 U/min spindle taper: vert. / horiz. SK 40/ SK40 range of revolution per miute: max zul. 40 - 2000 U/min feed:: 2-3600 mm/min quill travel: 80 mm Table dimensions: 810 x 420 mm total power requirement: 3 KVA Dsdpfxsu U E T Is Abuscc machine weight approx.: 1300 kg dimension machine xH: 1,8 x 1,35 x 1,95 m Milling machine with shaping head joint length 32-80mm with 10 x double strokes, 24-285 strokes/min Heidenhain 3-axis displays *

Year of construction: 1990, condition: good (used), Various collets and holders Approx.300 pieces. For DECKEL milling machines Dcjdehvz Iijpfx Abusc FP1 -FP2-FP3-FP4 Single sale demand inquiries.

Condition: used, x-travel 390 mm y-travel 200 mm z-travel 390 mm table-size 775 x 330 mm spindle taper ISO Sk 40 spindle turning speed range 40 - 2000 U/min quill stroke 40 mm total power requirement 2,2 kW weight of the machine ca. 1,4 t dimensions 1,75 x 1,5 x 1,8 m Universal Milling Machine - Digital Display - Chip Guard Dsdpfsxfb Hgjx Abuecc - Coolant System - Machine Light - Chip Tray - Machine Feet - Operating Instructions

Condition: excellent (used), Year of construction: 2011, Weiler Primus VC precision lathe Year of manufacture: 2011 Technical details Turning diameter: 250 mm Turning length: 500 mm Center height: 140 mm Swing diameter over bed slide: 280 mm Max. swing diameter over cross slide: 150 mm Main spindle: Speed range – main spindle: 30 – 4,000 rpm Power 4.0 kW Number of gear stages: 1 Spindle head: 5 / DIN 55027 Spindle diameter in front bearing: 70 mm Spindle bore: 40 mm Usable bar diameter: 40 mm Tool holder: System: MultiFix B Turning tool shank cross-section: 20 x 20 Tailstock: Quill travel: 85 mm Quill diameter: 40 mm Tailstock taper: MK 3 Feeds: Number of feeds: 24 Longitudinal feed: 0.02 – 0.63 mm/rev Cross feed: 0.006 – 0.2 mm/rev Thread cutting: Metric: 0.25 – 8 mm Inches: 80-2 1/” Travel distances: X-travel Cross slide travel: 150 mm Z-travel by cross slide: 500 mm Z-travel by top slide: 110 mm Total power requirement: 15 kVA Machine weight: approx. 800 kgs Space requirements: 1400x935x1550 mm Dedjw Ebdbepfx Abuecc Accessories/options: - Documentations - 3-jaw chuck diameter 160mm, with jaws - 4-jaw chuck diameter 160mm, with jaws - Collet type chuck with collets - Tailstock - Multifix tool holder, with holders - Steady - Change gears - Different kind of tooling - Lista cabinet - Spare parts - etc... Under power in our warehouse.

Condition: good (used), functionality: fully functional, Universal milling machine Deckel FP4M Active Manufacturer: Deckel Djdewbqnnopfx Abuocc Type: FP4M Condition: used, good Digital readout: 3 - axis digital readout Heidenhain Travels: X - axis: approx. 500 mm Y - axis: approx. 400 mm Z - axis: approx. 400 mm Table clamping surface: approx. 700 x 400 mm Speed range: approx. 50 - 2500 rpm Tool holder: ISO 40 Hydraulic tool clamping Drive power: approx. 6.0 kW Feed rates & rapid feeds: in all 3 axes Feed range: approx. 8 - 630 mm/min Rapid traverse: approx. 3.0 m/min L x W x H: approx. 2300 x 1800 x 1800 mm Weight: approx. 1750 kg Machine light Spindle guard Scope of delivery: - 10x tool holders - Allmatic high-pressure vice - documentation - Spindle guard