Tool cutter

DECKEL FP3

Condition: used, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 400 mm, overall weight: 1,800 kg, DECKEL FP3 L MILLING MACHINE X-axis travel: 800 mm Y-axis travel: 300 mm Column travel: 200 mm Z-axis travel: 400 mm Spindle speed: 25 - 2,000 rpm Motor power: 4 kW Feed rate: 5 - 500 mm/min Lhodsz Ak Axjpfx Anxjl Rapid traverse rate: 1.5 m/min Work table: 1,000 x 700 mm Tool holder: SK40 Weight: 1.8 t Heidenhain optical scales

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Universal Milling Machine Deckel FP4M with 3-Axis Active Digital Readout Heidenhain, Excellent Condition, CE Compliant!!! Technical Data: - Year of manufacture: 1992, Machine no. 2203-8449 - Fixed angle table - Spindle speed: 50 - 2500 rpm - Feed rate: 8 – 630 mm/min - Drive power: 3.7 / 4.4 kW - Spindle brake - Rapid traverse: 1300 mm/min - Travel (X/Y/Z): 500/400/400 mm - Vertical milling head traverseable on column - Vertical and horizontal quill - SK40 taper - Vertical quill extendable by 90 mm - Hydraulic drawbar system - Approx. weight: 1600 kg Lhsdeu Tuk Hjpfx Anxol Equipment and Accessories: - 3-axis active Heidenhain digital readout - Coolant system - Chip tray - Central electric lubrication - Operating manual, spare parts drawings About the Machine: For sale is a Deckel FP4M Universal Milling Machine (Active) in very good condition. The machine has minimal backlash, and all slides move smoothly. Even at maximum spindle speeds, the milling machine runs quietly. The machine features hydraulic tool clamping. The FP4M was only occasionally used in a state-run facility for training purposes. On this newer FP4 model, the feed rates are steplessly adjustable in all three axes, and each axis also features a rapid traverse. A major advantage is the active 3-axis digital readout. With the Heidenhain control, you can input measurements that the machine will approach automatically. Oil change has been performed; mechanically and electrically tested. The Heidenhain digital readout makes work easier and even more precise. Take advantage of the opportunity to inspect and test this machine under power on site.

Condition: used, x-travel 400 mm y-travel 315 mm z-travel 400 mm control Dialog 4 spindle tunring speed 3.150 U/min In our assessment, the machine is in good used condition Lsdpfx Anjzz S Rnoxshl and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: good (used), Year of construction: 1974, functionality: fully functional, Technical details x-travel 500 mm y-travel 300 mm z-travel 380 mm table surface area 800 x 420 mm table load capacity 400 kg tool taper ISO 40 spindle turning speed range 40 - 2000 U/min feeds longditudinal/cross/vertical 10 - 500 mm/min rapid traverse 1500 mm/min main drive 3 kW weight of the machine ca. 1,3 t Additional information * 3-axis digital readout (Heidenhain) * Adjustable vertical milling head with quill adjustment * Additional horizontal spindle * REPAR 2 safety device Lhodpszzwzfofx Anxsl * Machine light * Anti-vibration mounts Transport dimensions: The machine will be loaded onto a heavy-duty pallet; Dimensions: 1800 x 1100 x 2100 mm (length x width x height)

Condition: ready for operation (used), Year of construction: 2016, number of axes: 3, This 3-axis DMG MORI CMX 600 V was manufactured in 2016, featuring a 4th axis rotary table preparation, Siemens 840D control, and SK40 spindle. It includes advanced probing systems for both workpiece and tools, ensuring precision. Ideal for those looking to enhance their machining capabilities with reliable equipment. Contact us for more information about this machine. • Basic machine with main‑drive options • Preparation for rotary table (4th axis), EA 510L (rotary table itself not included) • Safety measuring system for X/Y/Z axes • Signal lamp, 4‑colour standard • PROGRESSLine & Planolight • Signs language: Hungarian • Screen text: German/Hungarian • Documentation: Doc 1 & Doc 2 (HU); Electrical circuit diagram (DE) • Misc.: Preparation for machine handover; internal rebuild unit ID 34; inspection & preparation noted Additional equipment • Chip conveyor with ICS (internal coolant) + chip tank (Production Package 1) • Workpiece probing system TS 649 (on table) • Tool probing system TT140 • Lamp inside tool magazine • Tool loading through magazine door • Platform/foil machine base Lhjdpox D Di Uefx Anxjl • NetService remote service (ID 2632226)

Condition: used, CNC Milling Machine DECKEL Type FP 3 A Tool-tool milling machine with handwheels, also for conventional operation Serial No. 2206 - Built in 1982 GRUNDIG CNC 2101 CNC control system Travel paths X: 490 mm, Y: 300 mm, Z: 340 mm Table size 705 x 425 mm Spindle mount SK 40 Quill stroke 100 mm Lodpov R E Rdofx Anxehl Spindle speed 25 - 2500 rpm, 21 steps Feed rate 5 - 500 mm/min, continuously variable Rapid traverse speed 1200 mm/min Spindle motor power: 2/4 kW, pole-changing Power supply: 380 V, 50 Hz - GRUNDIG CNC 2101 CNC control system - Mechanical handwheels for all three axes - Universal tilt-and-turn table - Vertical milling head tilts and is manually adjustable by 200 mm - Hydro-mechanical tool clamping - Coolant system in the machine base - Protective enclosure at the front and sides with three hinged doors - Control cabinet adjacent (L x W = 600 x 430 mm) Space requirement: L x W x H: 1900 x 1700 x 1950 mm Weight: 1700 kg (machine 1540 kg + electrical cabinet 160 kg) Very good condition

Condition: used, power capacity / kW volt / V ampere / A DECKEL MONITOR Bildschirm DIALOG FP2 / FP3 Lhjdpfx Aoy S Eb Ronxel

Condition: used, Fully automatic scarf jointing line for the following dimensions: thickness: approx. 24 – 100 mm, width: approx. 80 – 240 mm, scarf joint lengths: 400 – 1,500 mm, finished length: 2.50 m – 13.50 m, infinitely adjustable. Consisting of the following plant components: - SMB vacuum stacking system, longitudinal, with 2 lifting tables and 2 package conveyor lines, year of manufacture 2013, package dimensions max. 1.20 x 1.20 x 6.00 m, 4 suction pads, Sicko system, singulation and infeed into a conveyor line for scanner feeding, board turner, diverter for too moist, too dry, diverter for B-quality, marking station or automatic operation - Bidac end-face scanner for scarf joint detection, year of manufacture 2013 - Brookhuis moisture measurement FMI 5, year of manufacture 2019 - Microtec scanner Goldeneye 502, year of manufacture 2012 with X-ray, 4 color cameras, and new optimization software - Dimter Opticut 350-2, year of manufacture 2003 with paddle ejector, year of manufacture 2009, and associated sorting belts and pneumatic ejector for 2 additional qualities - NKT packaging - NKT scarf jointing system with rotary table, special pack AH 1050, year of manufacture 2005, consisting of: milling machine, tipping station, infeed section, length 5.0 m, cycle press, length 6.00 m, crosscut saw - SMB stacking machine, year of manufacture 1998, length 2.50 – 13.50 m, divisible into 2 units (e.g. 2 x 5.0 m), 8 stacking arms, 8 stacking tongues, manually adjustable stop, infinitely adjustable, electro/hydraulically controlled, package width: max. 1200 mm, package height: max. 600 mm, hydraulic package ejector. Location: Customer Lhedjvvi Tyjpfx Anxsl

Condition: good (used), Year of construction: 1981, Deckel FP3L Active with 3-axis Heidenhain Active digital display, rigid table, vertical milling head, SK 40 S20x2 spindle mount. Good working condition. Ready for live demonstration upon request. Lhedpfx Anewg S Nkjxsl

Condition: reconditioned (used), Year of construction: 1984, Universal Tool Milling Machine DECKEL FP 3 Ljdpfx Aexuh Rdonxjhl With 3-axis active digital display Heidenhain TNC 11 Year of manufacture: 1984 Travel: X 500 / Y 300 / Z 400 mm Speed range: 25 – 2500 rpm Including the following accessories: - Rigid angle table, 850 mm x 400 mm clamping surface - Swiveling rotary table Ø 450 mm with dividing disks - Slotting head - Movable vertical milling head - Extendable quill for drilling - Infinitely variable feed via potentiometer - Various milling arbors SK 40 / S22 x 2 - Chip tray - Automatic central lubrication pump for X, Y, Z axis - Machine lamp - Coolant system - 4 machine feet - Operating manual

Condition: new, Year of construction: 2023, Product: CGM e41 Continuous 3-phase power: 41.0 kVA / 32.8 kW Maximum 3-phase power: 45.1 kVA / 36.0 kW Voltage: 230 /400 Volt Frequency: 50Hz Phases: 3 Engine: Model: Yanmar 4TNV98T-ZGECS EU Stage IIIA approved for stationary operation only Cooling system: Water Ljdpeq A U Aiofx Anxohl Fuel: Diesel Cylinder: 4 Displacement: 3319 cm³ Intake: Normal Engine speed: 1500 rpm Consumption at 3/4 load L/h: 8.5 Generator: MECC ALTE Type: brushless AVR control Digital control ComAp AMF Dimensions and weight: Length: 2000 mm Width: 850 mm Height: 1275 mm Weight, dry: 880 kg Tank capacity: 200 l Oil pan Cooling water preheating Battery charge retention 3-way valve Sound insulation hood: RAL 5015 sky blue Base frame: Black

Condition: ready for operation (used), DECKEL FP 1 / 3 - Axis Active Digital TNC 113 -CE marking -Travel ranges X / Y / Z: 300x160x340mm Ledezvcbgspfx Anxshl -Heidenhain TNC 113 / Linear control -Spindle speed range: 40 - 2000 RPM -Feed rates continuously adjustable in all three axes -Rapid traverse in all three axes -Swiveling vertical head & drilling quill -Vertical & horizontal milling capability -Tool holder: ISO 40 -Drive power: 1.5 / 1.9 KW -Fixed angular table -Chip tray -Coolant system -Work light -Documentation Dimensions: L x W x H: 1.3 x 1.2 x 1.8 meters / Weight: 950 kg Errors and omissions excepted.

Condition: not inspected (used), Please see technical details on photo. Lhedpehvzxzofx Anxsl

Condition: like new (used), Manual profile grinder UTMA model P20 Lhsdeff H E Ropfx Anxol

Condition: ready for operation (used), Tool milling machine Deckel FP 2 / 3-axis digital display "NEW" / ORIGINAL CONDITION from a university -Travel ranges X/Y/Z 400x200x400mm -Table clamping surface 700x350mm -Speed range 40-2000 rpm -Feeds and rapid traverses in all three axes -Tool holder ISO 40 -Vertical / Horizontal milling attachment -Fixed swivel table -Coolant system -3-axis digital display "NEW" -Spindle nut X-axis "NEW" -Machine feet -Documentation Lodjztdl Iepfx Anxshl Dimensions: LxWxH 1.5x1.7x1.8 meters / Weight 1600 kg Errors and omissions excepted.