Door tool group

Diatech

Condition: used, Year of construction: 2018, Edge banding machine AKV 3006 DK - F with jointing milling unit including DIA - tools Jointing thickness up to 40 mm Workpiece thickness up to 3 mm Combined milling station radius R 2.5 mm Technical description With application of hot glue to the workpiece for edge material up to 3 mm Workpiece thickness 60 mm without jointing unit, 40 mm with jointing unit Maintenance-free, coated glue pot HF - cross-cut station (16,000 rpm) for front and rear edge overhang HF - milling station (16,000 rpm) with interchangeable cutter (combination version) and fine adjustment from the operator side Free slots for additional processing units (system Hebrock), feed approx. 10 m/min Cutting depth adjustment of the cross-cut saw Signal lamp for workpiece sequence, robust chain drive, ergonomically arranged control panel Double-roller top pressure beam Aggregate viewing window from machine rear and operator side PLC control including touchscreen Technical data: - Feed speed 10 m/min - Panel thickness 8 - 40 mm - Weight: depending on equipment approx. 1550 kg - Dimensions (L x W x H) 5250 x 1445 x 1600 mm 2-point pneumatic cutter adjustment 1 unit Switching between radius - flush/bevel for the combined milling stations, switching between bevel or flush is manual by flipping the stop flap in the machine Buffing station (polishing) 1 unit Corner rounding cutter 1 unit incl. combination tool and pneumatic bevel/radius adjustment, max workpiece thickness 40 mm Minimum workpiece length 300 mm Radius R 2.0 mm Radius scraper 1 unit incl. pneumatic lift device, radius R 2.0 mm Surface scraper 1 unit with pneumatic engagement control Glue station change system incl. 2nd glue pot and glue outlet downwards 1 unit for quick color change Grooving saw unit horizontal into the edge 1 unit incl. pneumatic lift device and grooving tool Separate extraction of jointing unit 1 unit directly attached to jointing unit vertically upwards d=80mm for optimal suction performance from AKV 3005 DK-F urgently recommended Ball bearing for corner rounding cutter 24.1mm 1 unit Pgodpfx Ajxfh Tmodiew Ball bearing for corner rounding cutter 24.2mm 1 unit Interchangeable motor 0.37 kW for corner rounding cutter 1 unit with quick-change device incl. radius cutter R 1 Interchangeable spindles 1 set = 2 pieces 1 unit 1 set of quick-change motors for longitudinal processing top and bottom incl. tool R 1 Compressed air requirement: 100 - 150 l/hour. Storage location: Nattheim

Year of construction: 1998, condition: ready for operation (used), An angular system for Weinig window and door production is available. Max. tool outside diameter: 320mm, max. tool flight circle: 232mm, slotted spindle length: 640mm, profiling and synchronized spindle length: 285mm-320mm, control: Siemens WS400. Including complete tooling and style window. Documentation available. Pjdstq U A Ijpfx Adiogw

Condition: used, Year of construction: 2006, Manufacturer: Weinig Model: Unimat Super 4 Year of manufacture: 2006 Four side planer Manufacturer: WEINIG restored Model: UNIMAT SUPER 4 with mechanization of short workpieces EM15 - Year of manufacture: 2006 Technical specifications - Working width: max 150 mm - Working width: min 25 mm - Working height: max 50 mm - Working height: min 15 mm - Number of spindles: 3 - Power top spindle: 22 kW Pgedpsqprk Tefx Adijw - Power bottom spindle: 11 kW - Spindle rotation speed: max 1/min 7.000 rpm - Spindle diamete: 40 mm - Table length: 2.000 mm - Feedrate max: 24 m/min - Continuously variable feed - Seperate motor per spindle - Roller infeed Cardanic drive - Infeed from magazine - Motoric adjustment Planing height - Lubrication pump automatic - WEINIG Face-milling cutter - WEINIG EM 15 - Total connection: 45 kW

Year of construction: 1997, condition: excellent (used), Window making machines Psdpfx Aeiix Uvjdisgw WEINIG automatic tapping and slotting machine UNITEC 10, year 1997 profiling and milling machine UNIVAR 10, year 1997

Year of construction: 2021, condition: new, Directly available from stock List on request 550 pieces = 1x truck load ( 15000 kg theoretical weight / 13900 kg actual weight) Pgjdpfjica Amsx Adisw

Condition: excellent (used), mandrel diameter: 30 mm, Equipment: motor brake, Table milling machine SCM type T130 with four roller feed unit, table size 1200x730mm, max. Speed 10.000/min, spindle D=30mm. Motor 5.5kW A spindle D=40mm can also be supplied at an extra charge. Pgjdpot Rfn Ejfx Adisw

Condition: as good as new (ex-display), Year of construction: 2023, Automatic loading and unloading Advanced machining capabilities Ideal for volume production Elevate your door frame lining production with the Centauro Alfa Jamb, a state-of-the-art machine designed for the automatic loading, machining, and unloading of door frame linings and jambs. Combining precision, efficiency, and user-friendly technology, the Centauro Alfa Jamb is the ultimate solution for door frame manufacturing. The powerful CNC router head is capable of performing both vertical and horizontal machining operations. This versatile router head excels in hinge and lock plate recessing or slotting, ensuring each cut is executed with precision and consistency. Additionally, a specialised small router is included for spot drilling hinge screw holes and squaring the corners of hinge recesses, enhancing the accuracy and finish of your products. The Alfa Jamb automates the entire process from loading to unloading, allowing your operators focus on higher-level tasks while the machine handles the repetitive work. Programming is simple thanks to the latest generation TOP12-S color graphic touch screen controller. This user-friendly interface features pre-installed electronic macros, allowing you to quickly set up and adjust machining operations with ease. Specification Technical Information X Axis stroke 2800mm Y Axis stroke180mm Z Axis stroke 150mm Suitable for Jamb dimensions of 2400mm x 200mm x 75mm Router / Milling head 3.3kw, ER25, 0 to 18000 rpm Pilot Hole Drilling Head 2.2kw ER 25, 0 to 18000 rpm 3 x pneumatic vertical workpiece clamps, automatically activated through the program 3 x pneumatic horizontal workpiece clamps, automatically activated through the program Top 12-S industrial touch screen control 12" with simple macro programming CE safety perimeter guarding to sides / rear with a front light beam curtain Dust extraction connection 120mm Pgodjul Uaaopfx Adiew Pneumatic supply 6 Bar Overall Dimensions 9644 x 1844mm Overall weight 2000kg Total load 5.6kw Year - 2023 CE. Condition - As new, only used for showroom demonstrations

Condition: excellent (used), Year of construction: 1989, Pinheiro SFM1-900 Podotwrqbjpfx Adijgw - Wheel diameter 900 mm - Motor 11 kW - Height of the feeding wheel 24 cm - Belt length from 620 to 645 cm

Condition: used, Sawblade tiltable 0-45 ° Length of the rolling table 3.200, 3.800 mm cutting width 1.300, 1,500 mm Motor output 7,5 kW Cutting height 177 mm Cutting height at 45° 133 mm Saw blade diameter 500 mm Speed 3000/3600/4200 U/min. Pgedpfotg Ailex Adiow work height max. 870 mm Dust suction hood 1x120, 1x100 mm

Condition: new, Year of construction: 2025, Universal 5-in-1 Multifunction Machine - CMS260 is a tool that has gained recognition in the European market. We guarantee that this machine complies with safety and technological regulations. Here is a comprehensive description of this machine distribution: Advanced Technological Solutions: CMS260 combines high-quality construction with advanced technological software, designed for various woodworking applications. Compliance with Safety Standards: The machine meets all requirements regarding European Union and Polish safety regulations. It’s not just about performance, but above all, user safety. Technical Start-Up Documentation (TSD) in Polish: It includes access to full technical documentation, which makes operating and maintaining the machine easier. Authentic CE Declaration of Conformity: The CMS260 holds a genuine CE declaration of conformity, a certificate issued by authorized certification bodies within the European Union to verify compliance with European safety standards. Multifunctionality in Small Spaces: Despite its versatility, the machine performs well even in limited spaces, thanks to its smart design and compact dimensions. Precise Triple Cutter Shaft and Aluminum Sliding Table: The triple cutter shaft with HSS blades and aluminum sliding table with a triangular guide ensure precision and power during operations. Three Motors for Maximum Performance: The CMS260 features three motors as standard, providing significant power, especially during heavy-duty operations. Integrated User-Friendly Elements: The machine includes foldable planer tables for faster conversion to thickness planer mode, manual adjustment of the saw blade tilt up to 45°, and a clear electrical panel. Foldable Chip Collector Hood and Stable Planing Stop: The integrated foldable chip collector hood extends 100 mm, and the planing stop can be adjusted from 90° to 45°, improving workspace safety and efficiency. DRILLING ATTACHMENT (ADDITIONAL COST) Horizontal Drilling Machine: Drilling and chiseling are tasks easily mechanized. Pgsdev R Td Ejpfx Adijw Chiseling head that can be raised and lowered Table adjustable in two axes Adjustable length stop Two lower clamps and one side clamp Technical Data: Circular Saw Table dimensions: 920 x 410 mm Max. saw blade diameter: 254 mm Saw blade spindle: 30 mm Rotational speed of the saw blade at 50 Hz: 4000 rpm Saw blade tilt angle: 0°-45° Max. cutting height at 45°: 63 mm Max. cutting height at 90°: 78 mm Motor power: 2.2 kW / 400V Planer / Thicknesser Drum diameter: 70 mm Number of knives: 3 pcs Rotational speed of the cutting drum: 5500 rpm Feeding rollers: 32 mm Max. planing width: 260 mm Max. planing depth: 3 mm Workpiece angle adjustment: 0–45° Max. thicknessing width: 258 mm Max. thicknessing height: 225 mm Max. thicknessing depth: 4 mm Feed speed: 7 m/min Motor power: 2.2 kW / 400V Main table size: 920 x 410 mm Sliding table size: 238 x 1320 mm Dust extraction port diameter: 100 mm Milling Machine Spindle: 30 mm Spindle rotational speed: 1400/4000/6000/9000 rpm Spindle mounting length: 105 mm Max. spindle stroke: 110 mm Max. table hole: 160 mm Motor power: 1.5 kW / 400V Weight: 360 kg