Planer and moulder

WEINIG Powermat 1500

Condition: good (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 10000241, workpiece height (max.): 160 mm, workpiece width (max.): 310 mm, number of spindles: 4, WEINIG POWERMAT 1500 - SPECIAL MACHINE CONFIGURED FOR MILLING WOODEN DOOR FRAME PANELS Working width 30 - 310mm (with tool flight circle 93-125mm) Working height 10 - 160mm (with tool flight circle 93-163 mm)Description of machine parameters Number of spindles 4 Laedeuygcwepfx Ah Uek Spindles bottom 1 Spindles right 1 Spindles left 1 Spindles top 1 Separate motor for each spindle Electronic feed incl. brake, infinitely variable 5-40 m/min. Short infeed table 1.2 m long with 2 driven rollers above the table Hard-coated machine table surface Manual lubricant pump WEINIG Comfort Set Control system WEINIG MEMORY PLUS-SYSTEM CE mark Declaration of Conformity

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 1,330 h, load capacity: 5,000 kg, lifting height: 5,500 mm, free lift: 1,765 mm, fuel type: diesel, mast type: triplex, construction height: 2,910 mm, power: 55 kW (74.78 HP), fork length: 1,200 mm, empty load weight: 7,760 kg, total length: 3,748 mm, drive type: Diesel, construction width: 2,080 mm, All-terrain forklift Load center: 500 Fork width: 150 mm Fork thickness: 60 mm ISO class: ISO class 4 = 5,000 - 10,000 kg Mast type: Triplex Transmission: torque converter Speed class: 20 Technical condition: Very good Front tires Type: Pneumatic Front tires Size: AS 340/80 R18 Front tires Condition: 80 - 100% Rear tires Type: Air Rear tires Size: AS 18-22.5 163A8 Rear tires Condition: 80 - 100% Description: The M 50-4 rough terrain forklift is designed for work on difficult terrain or with obstacles. With 4 drive wheels and a ground clearance of 43 cm, this forklift offers good maneuverability under all circumstances. A wide range of tires is available to adapt to different terrains. This serves to optimize your productivity. Accessible from both sides, the pivoting cab offers a spacious operator's area with ergonomic controls. The high driving position offers a 360° panoramic view for greater safety for the driver and his surroundings. Sideshift, 3rd valve, full cab, CE certificate, -service booklet -CE declaration -operator's manual -spare parts manual Ledpfx Asn Hcw Djh Ujak

Condition: used, Year of construction: 2007, Travel range: X=4400 Y=2195 Z=440 mm Working area in X=3650 mm Y=1560 mm Clearance: 330 mm Electrospindle SCM Power 2000, high speed milling spindle with 13 kW power Rotary axis Vector (C-axis) Cleaning blower for tool on the milling unit Tool holder HSK 63 F Speed range 600 - 24,000 rpm, stepless via inverter Motor power 8.5 kW Tool holders: 6 pcs Tool changer: Rapid 12 (12 positions) Vacuum pump 250 m³/h / 5.5 kW Max. vacuum: 0.9 bar Reference stop at the sides of the table Drilling unit with 11 spindles (7 vertical / 4 horizontal) Control: NUM Series 1000 User interface: XILOG Plus PC Office hardware WINDOWS XP Professional Total connected load: max. 27.5 kW Weight: 5200 kg Storage location: Nattheim Lodpjw Dcb Sofx Ah Ueak

Condition: ready for operation (used), Technical characteristics pressure 2.2 kg / cm² 18 kW diathermic oil boiler timed pressing digital display Power and Motors Voltage: 400 V Pluging: Three-phased Power: 20 Kw Laedpfxjt N Auts Ah Usk Overall dimensions Lenght: 3500 mm Width: 1500 mm Weight: 3200 Kg

Condition: good (used), Shrink tunnel from a German manufacturer: Laodpeh U A I Rsfx Ah Uok -Tunnel opening approximately 500 x 200 mm. -Temperature adjustable up to 250 degrees and transport speed up to 25 m / min. -Choice of fixed or co-rotating tunnel bars. -By means of deflectors, the hot air streams at the top and in the middle can be adjusted separately. -Bottom air can be switched on separately. -The machine can be pushed or fixed in place by means of lockable castors.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, HOMAG EDGETEQ S-500 (OPTIMAT KAL 375/16/V25) Lasdpfx Ahjxwurys Uok Year of manufacture: 2022 Serial number: 0-200-73-4868 Excellent condition – used only for demonstration and sample production. The machine has been professionally maintained and is immediately available for inspection in Slovenia. Technical specifications and equipment: - Continuously adjustable feed speed: 16–25 m/min - Workpiece thickness: 8–60 mm - Fixed fence on the left-hand side - Adjustable working height - Pre-installed for LOOPTEQ O-200 / O-300 return system - Feed lock system - Workpiece alignment at infeed with roller support - Top pressure unit - Sizing package with DIA joint trimming cutter set WD40 - Gluing package with preheating up to 60 mm thickness - Adhesive application system with emptying function - Edge magazine with two vertical roll holders - Pressure zone - PERFORMANCE2 package - End trimming unit PK25 - Rough trimming unit BF10 (I-HM straight cutter set) - Profile trimming unit FF32 top/bottom WD60 with FLEXTRIM quick-change system (2 radii) - Multi-scraper MN21 automatic with profile knife set - Cleaning agent spraying unit - Glue joint scraper FA20 BASIC - Buffing unit FP10 top and bottom - PowerControl PC23 PowerTouch control system - TAPIO Ready - Ethernet network connection - Wired manual control for setup operation - WOODCOMMANDER software package with MMR data logging, ToolManager, speed adjustment for track control, and full diagnostic functions - Documentation in Slovenian (digital and paper format) - Remote service enabled

Condition: new, Working width (finished size) 23 – 180 mm Working height (finished size) 6 -105 mm Min. length of single workpiece 300 mm Feed speed 6 – 12 m/min Motor power horizontal spindles 2 x 7.5 kW Motor power vertical spindles 1 x 7.5 kW Lasdeiiv Dcspfx Ah Uek Spindle speed 6000 rpm Spindle diameter 35 mm Clamping length vertical spindles 120 mm Clamping length horizontal spindles 190 mm Manual lubricant pump Profile capacity without axial adjustment on vertical spindle 10 mm Los roller integrated in the outfeed table Suction DM 4 x 120 mm Including OPTIONS: - Motor-driven feed roller in front of the planer with lever for quick changeover - Front vertical printing unit in front of the left vertical spindle - Feed table length 2300 mm - Tool package consisting of 4 planing heads and a joint rebate cutter

Condition: ready for operation (used), Year of construction: 2011, Features:* Used telescopic belt conveyor* Condition: fully functional with traces of use* Ideal for fast material transport* Expertly dismantled and packed* Colour: Blue* 2 pcs. in stock* Price per pieceTechnical data:Manufacturer: BuddeBaujahr: 09/11Model: TGF03Total length: 14.530 mmConveyor length: 14.000mmLength retracted: 5.000mmLength extended: 14.000mmOverall width: 1.240mm (incl. switch cabinet)Width: 990mmBelt width: 600mmCondition: good (used)Belt type: GlattBauhöhe: 750mmIndividual weight: 2.200mmIncl. rear counterweights. Telescopic belt conveyorThe telescopic belt conveyor is ideally suited in the order picking zone to interlock machines or workstations and to optimise the internal process. During transport, the telescopic belt conveyor can convey sensitive and differently sized containers, boxes or other packaging and article units to the loading or unloading point and also serves, for example, as a connecting section in front of or between production and processing machines. In addition, it enables efficient part transport in operations and warehouses and serves to convey considerable quantities and distances. Customized solutions for your intralogisticsFor roller conveyors, belt conveyors, inclined conveyors or telescopes for loading and unloading your goods, we are your competent partner! We would be pleased to prepare an individual offer for you or advise you on the Lsdpfx Ahsd S Hkio Ueak

Year of construction: 2020, condition: refurbished (used), LINCK CSM 120/6 5 STILLIG WARIABEL GENERALLY OVERHAULD AFTER OVERHAUL MACHINE STILL 2+132 KW 6 MOVING SAWS HIGH PERFORMANCE MACHINE NEW FAULT UNDER POWER OPPORTUNITY MORE INFO, PICTURES BY E-MAIL.. Lasdevtc D Tspfx Ah Ujk

Condition: used, Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 3 kW Feed speed 5-24 m/min. total power requirement 27 kw Dimensions (L/W/H) 3900 x 2200 x 2000 mm weight of the machine ca. 2500 kg Weinig four-side planer Profimat 23 window version with glazing bead removal, ATS control and program control ----- Machine will be renovated and functionally checked! Technical data summary (please inquire about any additional accessories included) ----- Generally ----- > Working width: 230 mm > Working height: 120 mm > Number of spindles: 6 pieces. > Dressing table length: 2500 mm > Feed speed: 5-24 m/min > Total power requirement: 27 kW > Dimensions: 3900 x 2200 x 2000 mm > Machine weight, approx.: 2500 kg Spindle arrangement ----- > Spindle 1: bottom > Spindle 2: right, pneumatically clocked up-down > Spindle 3: left > Spindle 4: top > Spindle 5: bottom > Spindle 6: Glass bead saw pneumatically up and down Spindle description Lodpou Su Husfx Ah Ueak ----- > Spindle 1: 4 kW, 6000 rpm, 40 mm diameter > Spindle 2: 7.5 kW, 6000 rpm, 40 mm diameter > Spindle 3: 6000 rpm, 40 mm diameter > Spindle 4: 5.5 kW, 6000 rpm, 40 mm diameter > Spindle 5: 4 kW, 6000 rpm, 40 mm diameter > Spindle 6: Glass bead saw 2.2 kW, 6000 rpm, 40 mm diameter Other features ----- > Glazing bead removal > ATS control, automatic 2-axis positioning for width and height (left and upper spindle) with program memory 99 programs > Machine operation: window package Joint control of the right spindle and the glazing bead removal via manual selector switch in the control panel > Spindles with mechanical digital display Option: used planer heads (technical data according to the manufacturer - no guarantee!)