Top Sanders

DMC EUROSYSTEM M2

Condition: used, machine/vehicle number: 007984, Max. machining width: 1300 mm Min. machining thickness: 4 mm Working Table: Fixed pass height Nsdpfx Aowqdbmsh Sedc Vacuum feed belt: yes No. Operating units: 4 Nr

Condition: new, Year of construction: 2024, functionality: fully functional, power: 5 kW (6.80 HP), cutting height (max.): 200 mm, cutting width (max.): 1,300 mm, saw blade diameter: 550 mm, cutting length (max.): 3,200 mm, cutting width at rip fence: 1,300 mm, sliding table length: 3,200 mm, Exhibition machine F 45 Elmo Drive Ndsdeuh R R Eopfx Ah Sec - Swivel + / - 45 ° - Cutting height 200 mm - Preparation for scoring unit no. M24038 - Double roller carriage with 3200 mm - Angular mitre fence 3200 mm Digit L - CNC rip fence 1300 mm - Duplex mitre fence 1350 mm manual - Template holder - On/Off switch on the double roller carriage - Front support roller

Condition: used, Year of construction: 2025, functionality: fully functional, Equipment: CE marking, Holz-Her Edgebanding Machine SPRINT 1329 Multi with motorized pressure beam PUR & EVA adhesive (up to 60mm) with the NEW GLU JET GJ725 PUR PRO including vacuum pump motorized infeed guide rail guide for narrow parts edge trimming IntelliSet - tool correction fa.s.t. - setup in the gap + remaining length display of the edge band roll iTronic - pressure & adhesive quantity control automatic chain lubrication second workpiece discharge + air cushion table in the infeed area fully motorized equipment for all units multifunction milling - radius 1.3mm (2x) & 2mm (2x) + nesting package, vertical, bottom spraying devices + padding unit with texture finish for normal applications and structured surfaces and more The machine is currently being refurbished at the factory in Voitsberg / Austria. Completion: approximately October / November 2026 Nedpozx Ennsfx Ah Ssdc Delivery, installation and training for the machine can be arranged directly through us for an additional fee. The machine is currently located in our delivery warehouse in Gratwein / Austria. In the event of discrepancies between the German version and a foreign language version, only the German version shall be binding. Our terms and conditions can be found on our website at holzher.de/de/agb.

Condition: used, Technical details: Njdpfxsvfdr Ne Ah Ssdc Tool holder shaft type: BT 40 Tool holder shaft type: Futter / Chuck Tool holder shaft type: Weldon Big selection of BT 40 Tool holders for sale. All kinds of Weldon, Chucker etc. available. See pictures. *

Condition: excellent (used), SINGLE SIDE EDGE BANDER (Left) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Edges thickness in strips / lippings (min/max) mm 0,4 / 20 Panels thickness (min/max) mm 8 / 60 Numerical Control POWER CONTROL PC23 Powertouch / WoodCommander (TAPIO Ready) Feeding speed m/min 16-25 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) 2 x Kw 3 Lamps to heat the workpieces side Glueing Unit (Hot Melt + Quick Melt Unit) FE-MA-TECH + QA/PU + PU65 Band Pressure zone (N.C. adjustment) "C 7" Edge coils supporting unit (No. 2 reels) with SERVO-control edge feeding Snipping (end-cutting) unit PK 25 (2 x Kw 0,8) max 25 m/min Rough Trimming unit BF20 (2 x Kw 1,5) Fine Trimming unit (Multiprofile) MF21 (2 x Kw 0,55) swevelling 0°-20° Ndjdpfjzku Rpox Ah Sjc Multi Function Unit (Profile contour Trimming unit) FK 30/V20 (1 x Kw 0,7) adjustable by NC Milling-grooving units SF 21 (1 x Kw 5) 0°-90° Profile edge scraping unit MN 21 (Multiprofile, by N.C.) Glue scraping Unit FA 20 Buffing unit FA06 (2 x kW 0,18) + Free Space

Condition: new, Year of construction: 2024, Martin T 45 thickness planer with Tersa cutterblock The T45 thicknessing machine offers ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and easy to operate and works extremely quietly. and works extremely quietly. The standard electronic control system makes Thanks to 99 storable planing dimensions, setting the planing height is so easy that even the the first workpiece fits perfectly. Of course, the thicknessing table can also be moved at the simple press of a button, or can be incremented by 0.1 mm. upwards. The switching elements of the feed control are also within easy reach. reach. The heavy, vibration-damping composite stand with the high-quality the high-quality bearing-mounted planing shaft guarantees excellent surfaces. Thanks to the sound-insulating construction, you can work quietly even in the standard version. - Planing width: 630 mm - Weight: approx. 1,200 - 1,400 kg - Planing height: 2.8 - 300 mm - Table length: 1,260 mm - Workpiece length min.: 270 mm - Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; button for manual quick and fine adjustment of planing thickness according to digital display, push button for cutterblock start and stop, integrated operating hours counter - Cutterblock: TERSA solid steel cutterblock Z4 Ø 125 mm; incl. blocking for easy cutter change - Thicknessing table: Electric thicknessing table adjustment with fine adjustment, travel speed 10 mm/s, mounted on 4 support spindles to prevent tilting, finely planed table surface - Feed: 2 speeds 6 / 12 m/min, can also be selected electrically during planing, large rubber feed rollers Ø 85 mm to compensate for different thicknesses of wood, rubber rollers are gentle on the material and self-cleaning, easy roller change; link pressure beam at infeed - Suction system: Swivel-up, split hood with chip extraction nozzle Ø 160 mm, can be connected optionally on the left / right (in special cases on both sides); minimum extraction air volume: 27 m³/min. at 20 m/s - Maintenance device: Central lubrication strip for oil lubrication points; bearing / cutter shaft lubrication via nipple - Accessories: 1 grease gun, filled with long-life grease 1 oil gun 1 open-end wrench 1 tool for blade change 1 pair of blind knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (w. extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Nodpfx Ahsqlckpo Sjdc Dust emission Low dust emission according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Condition: good (used), functionality: fully functional, mileage: 65,346 km, maximum load weight: 30,000 kg, Year of construction: 2017, operating hours: 10,373 h, Manufacturer: Liebherr Type: LTM 1030-2.1 Year: 2017 Capacity (t): 35 t Main boom: 30 m Jib: 15 m Kilometers: 65,346 km Nsdpfxez Ar Nts Ah Sjdc Crane operating hours: 10,373 h Chassis operating hours: 4,287 h

Condition: good (used), functionality: fully functional, type of input current: three-phase, spindle diameter: 30 mm, rotational speed (max.): 10,000 rpm, rotational speed (min.): 3,000 rpm, height adjustment type: electric, milling spindle length: 140 mm, SCM T130E Spindle Moulder Spindle diameter: 30 mm Spindle length: 140 mm Variable spindle speed: 3000/4500/6000/7000/10000 RPM Main motor power: 7.5 kW Electronic spindle height adjustment via switch 4-roller feed unit Feed speed adjustment via variator Njdpfxexzylts Ah Sedc CE certificate DTR technical documentation

Condition: used, Year of construction: 2019, operating hours: 7,200 h, Equipment: all wheel drive, Very nice Liebherr L 546 for sale Top condition - low operating hours: Liebherr L 546 Z 2plus1 Delivered to customer on April 26, 2019 Original paint Chassis number: VATZ1560-054320 Year of manufacture: 2019 Operating hours: approx. 7270 4-cylinder inline engine, 123 kW/167 hp, water-cooled with turbocharger, emission stage 4 Ndodszrapajpfx Ah Sjc Operating weight depending on equipment: approx. 15,000 kg Dimensions depending on equipment: Machine length: 7,200 mm, width 2,500 mm, height 3,300 mm, hydrostatic drive with 3-speed gearbox * Driving vibration damper BSS? Suspension system for attachments * Central lubrication system, factory installed by Liebherr * Reversing fan for cleaning the radiator package - reverse operation * Climbing aid in front of the windshield for easier cleaning of the windshield * Air filter with pre-separator "TopAir" for pre-cleaning the intake air * Premium display with touchscreen * Driver's seat "Comfort" with pneumatic suspension, seat heating, and headrest * Automatic climate control - maintains the set temperature automatically * Adjustable steering column * Armrest on the right * Opening window on the left in the driver's door * Foldable exterior mirrors * Radio with hands-free system * Cooler box in the cab * Rear view camera * Lamp bracket made of steel instead of plastic * 4 work lights on the rear of the driver's cab roof, LED * 4 work lights on the front of the driver's cab roof, LED * Fire extinguisher on the fender * Road approval * Tires 20.5 x 25 L3, front 2 x 30% remaining * Tires 20.5 x 25 L3, rear 2 x 30% remaining * Net price with permanently mounted earth bucket, approx. 2.8 cubic meters: 73,900.00 EUR net + VAT Optional equipment available for an extra charge: * Hydraulic quick coupler 3,550.00 EUR * Pallet fork, 5 or 8 tons, from 2,190.00 EUR Used scales incl. installation * E.g. Pfreundt WK 60 S 5,900.00 EUR * Also available with printer * 3rd hydraulic circuit for attachments such as tipping bucket, grab bucket, sweeper, etc. on request * All prices net export? Domestic plus 19% VAT We can offer you the transport to your location. Sale only to commercial businesses or for export. Sale in "as is" condition. No guarantee or warranty. The stated mileage or operating hours are read from the odometer or hour meter; we do not guarantee the accuracy of these figures! Subject to prior sale. The vehicle description does not constitute a binding offer, and the information provided is not to be regarded as guaranteed characteristics. The description and the information contained therein serve only for the general identification of the vehicle and do not constitute a guarantee in the legal sense. The information does not claim to be complete. The information/descriptions and images provided are non-binding and do not constitute guaranteed characteristics. Only the specifications in the order confirmation and invoice apply. The seller assumes no liability/warranty. The advertisement may contain typographical and data transmission errors. The seller has not inspected the machine. Equipment may need to be checked separately.

Condition: excellent (used), Year of construction: 2010, Altendorf F45 Elmo 3-axis control Carriage length: 3200 mm Cutting width at rip fence: 1300 mm Scoring unit: Prepared Saw blade height adjustment: electric / position control Saw blade tilt adjustment: electric / position control Rip fence: electric / position control Crosscut fence adjustment: manual Saw blade angle display: digital readout Cutting height display: digital readout Crosscut fence with mitre function: yes Saw blade diameter: 450 mm Ndedpfx Aey Sbvksh Sec Speeds: 4 Motor power: 5.5 kW Extraction port: 80 and 120 mm Duplex mitre fence Year of manufacture: 2010 Price: 15,500.-