5-axis simultaneous machining center

DMG Mori DMU 70 eVo linear

Condition: ready for operation (used), Year of construction: 2010, operating hours: 17,250 h, functionality: fully functional, travel distance X-axis: 710 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 520 mm, controller model: Heidenhain Mill Plus, spindle speed (max.): 18,000 rpm, In 2015, a new spindle was installed! TECHNICAL DETAILS Travel range X-axis: 710 mm Travel range Y-axis: 520 mm Travel range Z-axis: 520 mm Maximum spindle speed: 18,000 RPM Number of tool magazine slots: 30 Tool holder: SK40 Distance between T-slots: 63 mm Rotational speed of the 4th axis max.: 40 RPM Rotational speed of the 5th axis max.: 40 RPM 4th axis swivel range: 360 x 0.001 degrees 5th axis swivel range: 0 ± 102 x 0.001 degrees MACHINE DETAILS Control system model: Heidenhain - Mill Plus Operating hours: currently 36,500 hours Spindle hours: currently 17,250 hours EQUIPMENT Programmable coolant nozzles Coolant gun Chip conveyor 40 bar internal coolant system with 600 l paper filter system Measuring probe 3D Quickset Lhjdjy Thlnopfx Anxsl Laser tool measurement Visiport Handwheel Signal light Operating mode 4

Condition: excellent (used), Year of construction: 2015, operating hours: 3,104 h, functionality: fully functional, machine/vehicle number: 11415741834, operating hours of spindle: 1,347 h, Equipment: chip conveyor, documentation/manual, DMG MORI DMU 50 – 5-Axis Machining Center – Excellent Condition – Only 1,347 Spindle Hours For sale is a meticulously maintained DMG MORI DMU 50 5-axis machining center from 2015. The machine was relocated to our facility in June 2026 and subsequently fully commissioned, geometrically measured, and technically inspected by the DMG MORI factory service. During this process, all functions were checked, the machine was realigned, the measuring probe was calibrated, and the kinematics were checked and corrected. Afterwards, a successful test run was performed without any issues. The machine is immediately ready for production. With only 1,347 spindle hours and approximately 3,104 operating hours, the machine is in exceptionally good technical condition. Technical data: • Control system: Siemens SINUMERIK 840D solutionline / CELOS • Spindle speed: 14,000 min⁻¹ • Machine weight: approx. 4,450 kg • Voltage: 400 V / 50 Hz Equipment: • 5-axis machining • Siemens SINUMERIK 840D solutionline / CELOS • Internal cooling (IKZ) • High-pressure coolant system • Chip conveyor • 3D measuring probe • Tool measuring device TT160 • Electronic handwheel • USB interface activated • CELOS user interface Maintenance / Service: DMG MORI Service, July 2026 The following work was carried out by the manufacturer: • Machine realigned Lsdpfx Aoziz S Donxehl • Geometry fully checked • Geometry report created • Measuring probe newly calibrated • Kinematics checked and corrected • Tool measuring device TT160 refurbished • Complete function test performed • Operator training provided The machine was subsequently fully inspected and approved by DMG MORI.

Condition: ready for operation (used), Year of construction: 2016, number of axes: 3, This 3-axis DMG MORI CMX 600 V was manufactured in 2016, featuring a 4th axis rotary table preparation, Siemens 840D control, and SK40 spindle. It includes advanced probing systems for both workpiece and tools, ensuring precision. Ideal for those looking to enhance their machining capabilities with reliable equipment. Contact us for more information about this machine. • Basic machine with main‑drive options • Preparation for rotary table (4th axis), EA 510L (rotary table itself not included) • Safety measuring system for X/Y/Z axes • Signal lamp, 4‑colour standard • PROGRESSLine & Planolight • Signs language: Hungarian • Screen text: German/Hungarian • Documentation: Doc 1 & Doc 2 (HU); Electrical circuit diagram (DE) • Misc.: Preparation for machine handover; internal rebuild unit ID 34; inspection & preparation noted Additional equipment • Chip conveyor with ICS (internal coolant) + chip tank (Production Package 1) • Workpiece probing system TS 649 (on table) • Tool probing system TT140 • Lamp inside tool magazine Lhodpsx D Di Usfx Anxol • Tool loading through magazine door • Platform/foil machine base • NetService remote service (ID 2632226)

Condition: used, Year of construction: 2008, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, torque: 46 Nm, controller manufacturer: HEIDENHAIN, controller model: 530, spindle nose: HSK A 63, number of slots in tool magazine: 170, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, CNC Heidenhain iTNC 530 WORKING AREA Longitudinal travel X: 800 mm Lsdpfx Anoy Tam Rexshl Transversal travel Y: 600 mm Vertical travel Z: 500 mm B axis: +30° / -100° C axis: n x 360° WORK TABLE Table dimensions: 320 x 320 mm Maximum workpiece weight: 120 kg SPINDLE Spindle taper: HSK A63 Maximum spindle speed: 24.000 rpm Motor power 40% ED: 22 kW Maximum torque 40% ED: 46 Nm AUTOMATION Tool magazine capacity: 170 tools Erowa pallet changer: 7 positions MACHINE EQUIPPED WITH • High-pressure coolant through spindle • Probe • Laser tool presetting • Chip conveyor • Oil mist cooling system • Rotoclear • ITC Intelligent Thermal Control • ITC-5X 5 Axis Intelligent Thermal Control • APS Advanced Process System • Remote electronic handwheel • Instruction manuals and CE declaration

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 13-13, The BLOMAX 4 Blowmoulding machine is of the model 13-13. The machine has no defects and operates in excellent condition with full functionality. Power : 400V/150A/60000W Lhedpfxet Akgwo Anxol Year of construction : 2000

Year of construction: 2020, condition: as good as new (ex-display), electrode diameter 0,5 to 3mm travels 300x400x350mm ) CE-cretification verifies the best possible safty all Machines in over-floor construction Ljdpfof Hmn Asx Anxjhl Elektrode Ø 0,5-3mm Travel X-Axis 300mm Travel Y-Axis 400mm Travel Z-Axis 350mm Travel W-Axis 300mm Speed W Axis 30-60mm/min Rapid feed Z-Axis 120mm/min removal rate (max.) 300:1 Table dimension 320x440mm max.generator capacity 30A

Condition: excellent (used), Year of construction: 2015, Mikron HPM 800U HD 5 axis Vertical Machining Centre, with 7 pallet changer (2015) Traverses XYZ: 800 x 800 x 550mm, 500 x 500mm table, A axis -91 / + 121 degrees, Lsdpezm Ticefx Anxshl C axis, 360 degrees, Heidenhain TNC530, Spindle Speed 20,000rpm, 36kW Spindle Motor, HSK A63 Spindle Taper, 165 tools, swarf conveyor, through spindle coolant,

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, We offer you: CNC machining center, universal, with pallet automation Manufacturer: DMG MORI Type: DMU 50 3rd with PH Cell 150 Year of manufacture: Machine 2023 / Automation 2025 Control system: Celos with Siemens 840D sl Operate Technical data: Travel ranges: X-axis: 650 mm Y-axis: 520 mm Z-axis: 475 mm B-axis: -35 to +110° C-axis: 360° Main spindle: Speed range - main spindle: 20 - 15,000 rpm Drive power - main spindle (100/40%): 21 / 16 kW Work table: Table dimensions: D 630 x 500 mm Tool changer: Tool holder: SK 40 Number of tool positions: 120 Feed rates: Rapid traverse (x/y/z): 42 m/min Operating hours: approx. 12,320 h Spindle hours: approx. 4020 h Technical features & accessories: - Active spindle cooling - Direct path measuring system in all axes - Scraper-type chip conveyor with cleaned filter screen - Internal coolant supply (IKZ) 40 bar, consisting of: - Paper band filter - 600 l tank - Cabin roof - Rotary through-feed in the spindle - Double filter - Blow-off air through the spindle center - Rotating viewing window - Flushing gun for chip removal - Oil and emulsion mist separator Ledpfx Asz A A Dxenxohl - Infrared measuring probe, manufacturer Heidenhain TS 460 (if available) - Tool measurement system, manufacturer Heidenhain TT160 (if available) - Preparation for 3D quickSET - Automation interface PH Cell, consisting of: - Interface - 4-channel rotary through-feed - Automatic loading door - Operating mode 4 - Tracy surface interpolation - Pallet loading and unloading system PH 150, consisting of: - 10-position pallet storage - External electronic handwheel (if available) Accessories, tools and clamping devices shown in the pictures are only included in the scope of delivery if this is stated in the additional information. Subject to change and errors in the technical data and information, as well as prior sale!

Condition: excellent (used), Year of construction: 2012, Partially overhauled Heidenhain Manual Plus 620 control system Lhsdeyffigjpfx Anxel Working area: Swing diameter over bed: 475 mm Swing diameter over cross slide: 260 mm Cross slide travel: 260 mm Centre distance: 1000 mm Turning length: 880 mm Main spindle drive Drive power – AC motor – 40% duty cycle: 25 kW Headstock Spindle nose DIN 55026: A6 size Spindle diameter in front bearing: 115 mm Spindle bore: 78 mm Speed range (constant V): 1 – 3000 rpm Cross slide Feed rate, cross: 0.001 – 1000 mm/min Feed rate, longitudinal and thread cutting: 0.001 – 2000 mm/min Rapid traverse, cross/longitudinal: 5/10 m/min Tailstock Quill diameter: 70 mm Quill stroke: 120 mm Quill taper: 5 MT

Condition: like new (used), Year of construction: 2008, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 45 m/min, rapid traverse Y-axis: 45 m/min, rapid traverse Z-axis: 45 m/min, controller model: Heidenhain iTNC530, table width: 960 mm, table length: 600 mm, overall weight: 9,000 kg, spindle speed (max.): 40,000 rpm, operating hours of spindle: 22,800 h, spindle nose: HSK E 40, number of spindles: 1, number of slots in tool magazine: 38, input voltage: 400 V, Equipment: documentation/manual, rotational speed infinitely variable, This machine has been used exclusively for copper processing. The coolant water supply is present but has not been used to date. In other words, a superb machine that has always done very light machining, has never seen coolant, and is equipped with a Weiss spindle running at 40,000 rpm. Lhsdexgukbepfx Anxjl The machine comes as standard including: - Original documentation for the machine and the Weiss spindle - BLUM tool laser - Heidenhain TS-440 3D probe - Spindle and emulsion cooler - Lockable roof (harmonica style) The machine can be inspected under power by appointment.