Machining center

Droop & Rein Modimill

Condition: good (used), Year of construction: 1999, x-travel 2400 mm y-travel 2850 mm z-travel 1000 mm Control FIDIA C20 table dimension - longitudinal 2200 mm Cpedpfsvwgphsx Aa New table dimension - cross 1800 mm table load 12 t workpiece tool changer 30-fach tool taper ISI SK-50 spindle turning speed range 5000 U/min power capacity - milling spindle 30 kW

Condition: excellent (used), Year of construction: 2023, operating hours: 106 h, lifting height: 5,000 mm, fuel type: diesel, mast type: triplex, power: 185 kW (251.53 HP), gearing type: automatic, fork length: 3,000 mm, color: red, Transmission: Hydrodynamic powershift, 3 gears, automatic Year of manufacture: 2023 Unladen weight: 46,760 kg Lifting capacity: 33,000 kg Overall height: 370 cm CE certification: yes Technical condition: very good Visual condition: very good KALMAR DCG 330-12 FORKLIFT TRIPLEX FULL FREE LIFT FORK SHAFT SYSTEM 33,000 KG at 120 CM SHORT WHEELBASE = 475 CM FORKS: LENGTH = 300 CM, WIDTH = 30 CM, THICKNESS = 11 CM FRONT AND REAR VIEW CAMERAS TIRE PRESSURE MONITORING CENTRALIZED LUBRICATION LED LIGHT PACKAGE CHASSIS / BODY: - Towing pin - Steps with slip protection - Rearview mirrors mounted left and right on the front fenders - Heavy-duty and protective fenders CAB: - EGO cab - Clear and hardened safety glass, thickness 6 mm - Clear windows including sliding windows in the left and right doors - Full doors with locks left and right - Complete control system on right console including light control, rotary dial for display, levers for load handling system (electrically adjustable, 2-way) - Multifunction lever on left side including horn, indicators - Braking system with pedal left and right - Cabin comfort including mirrors, handles, interior lighting, etc. - Wipers and washers for front/rear and roof window - Hydraulic steering with electrically height-adjustable steering wheel, manual fore-aft and lateral adjustment with steering knob - External reverse lights - Tiltable operator’s cabin - Step handle, left - Automatic heating and ventilation (ECH) with fresh air filter - Speed control pedal right - Kalmar standard key system - Cup holder - Coat hook - Color display: fuel level, indication; engine and transmission temperature; engine oil pressure; battery voltage; clock and date; operating hour counter; service interval display; speed; engine RPM; various popup information; AdBlue display STEERING SYSTEM: - Kalmar steering axle, including double-acting steering cylinder DRIVE TRAIN: - Axletech drive axle Cpsdpov Hn D Eefx Aa Now HYDRAULICS: - Electric servo - Sight glass on hydraulic oil tank - Variable displacement pumps - High-pressure filter - Automatic increase of engine speed when using the load handling function - Standard tilt angle 5F/10B ELECTRICAL SYSTEM: - 24 V electrical system - Rear and brake lights, LED - Working lights on front fenders, LED - 2 mast working lights - Turn signals including hazard lights, LED - Main power switch WHEELS: - Michelin 16.00x25

Condition: excellent (used), Year of construction: 2003, Deckel Maho DMU200P Year: 2003 Control Heidenhain iTNC530 Travels X: 2000 mm, Y: 1800 mm, Z: 1100 mm B-axis: 0.001° C-axis: 0.001° Number of controlled axes: 5 Table size 1700 mm x 1400 mm Spindle max speed 12000 rpm Spindle nose SK50 Tool changer 60 Positions Accessories/options: Cjdpfex Swbcox Aa Nopw Through spindle coolant, (IKZ) 40 bar Swarf conveyor Touch probe Heidenhain TS642 elektr. Handwheel Heidenhain Tool measuring system Blum Laser

Condition: used, Year of construction: 1965, honing diameter 80 mm stroke 280 mm throat 300 mm total power requirement 6 kW weight of the machine ca. 2,6 t Honing Ø 10 - 100 mm Max. honing depth, approx. 250 mm Max. spindle stroke 260 mm Distance between spindle and column 300 mm Mounting height 1,000 mm Table size 350 x 500 mm Height of table above floor 500 mm Cedpfx Aaot Hwups Nspw Spindle speeds in 2 steps, infinitely variable, approx. 85 - 300 rpm 170 - 600 rpm Stroke speed, infinitely variable, hydraulic 0 - 23 m/min Spindle drive 2 kW Total electrical load 6 kW - 380 V - 50 Hz Weight 2,600 kg Accessories / Special Features * Built-on 2-station tilting table which accommodates 2 workpieces. Mechanical workpiece clamping, using a manual lever. * Hydraulic infeed of the tool. * Switch-off via timer. * Air measuring device (probably). * Honing oil unit. * Various splash shields, etc. Condition : Good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. Thank you for your interest. We have a selection of honing machines available. Please let us know what you need.

Condition: like new (used), Year of construction: 2025, Portalkran 2x125 ton 30 Meter Hubhöhe Baujahr 2014 Csdegmdnfspfx Aa Nopw

Condition: excellent (used), Year of construction: 2013, operating hours: 87,327 h, functionality: fully functional, We offer you: Universal CNC machining center Manufacturer: DMG MORI Model: DMU 210P duoBlock µ-Precision Year of manufacture: 2013 Control system: Siemens 840D sl Technical specifications: Travel distances: X-axis: 1,800 mm Y-axis: 2,100 mm Z-axis: 1,250 mm Swivel range: 360° Main spindle: Max. spindle speed: 18,000 rpm Drive power - main spindle (100/40% ED): 35 / 25 kW Rotary table: Table diameter: 1,700 mm Tool changer: Tool holder: HSK-63A Number of tool positions: 120 Operating hours: approx. 87,327 h Spindle hours: approx. 48,297 h Technical features & equipment: - Universal milling head with controlled B-axis - NC rotary table with cooled drive train - In-process tool measurement, type: BLUM Laser NT Hybrid - Coolant supply 40 bar through the spindle center - Coolant tank 2,500 l - Chip conveyor - Rotating inspection window - Electronic handwheel - 3D path control - Infrared measuring probe, Renishaw PP60 optical (OMP 60) - 3D quickSET - 4-color signal tower - Rinse gun with pump - Operating mode 4 - Machine adaptation for aluminum and glass machining, comprising: - Linear guides with additional Viton wipers - Ball screws partly with additional Viton/felt wipers - Sealing air for all linear measuring systems - Lubrication interval reduced to 10 to 15 minutes (overgreasing) - Adjustment of the maintenance plan for steel covers - Interface for camera monitoring and integration into the control system - Machine equipped for vacuum operation, including: - 2-channel rotary union, special centering bush and cable conduit in T-slots to the table edge - Additional compressed air connection at the table plate edge (opposite vacuum port) - Integration of vacuum monitoring with terminals for NC stop and error message "Vacuum error" - Oil-resistant rubber hose secured by 2 clamps at the rotary union - Evaluation of "minimum level" error in feed and spindle stop - Monitoring of coolant flow for internal and external supply - Machine prepared (cable routing) for use of spindle growth sensor (SGS) Csdpfeyhbcuex Aa Nspw At the beginning of 2025, the ball screws and linear guides in X, Y, and Z axes were replaced. Accessories, depicted tools, and clamping devices are only included in the scope of delivery if explicitly listed in the additional information. Technical data, information, and interim sale subject to change and errors!

Condition: reconditioned (used), Year of construction: 2006, CNC Universal Milling & Drilling Machine DECKEL MAHO DMU 80 P duoBlock With MILL PLUS iT path control system Year of manufacture: 2006 Travel paths: X 800 Y 800 Z 800 mm Spindle speed range: 0 – 8,000 rpm, stepless (SK 50) Including the following accessories: - NC rotary table, 900 mm x 700 mm clamping surface (maximum table load 1.4 t) - Universal milling head with controlled B-axis - Universal tool changer with 40 magazine stations, double gripper (SK 50) - Fully enclosed guard cabin with sliding doors and interior lighting - ICS – 40 bar (internal coolant supply) - Chip conveyor - Rotoclear - 3D tactile probe Heidenhain TS 641 - Operating modes 3 + 4 - Electronic handwheel - 50 pcs. tool holders SK 50 Codpoxn Aczjfx Aa Nopw - 3 height-adjustable machine feet - Transport device - Operating manuals

Condition: new, functionality: fully functional, fuel type: electric, overall weight: 2,500 kg, maximum load weight: 2,500 kg, mast type: telescopic, Samojezdny żuraw akumulatorowy renomowanej włoskiej firmy JMG, model MC25S ze sterowaniem radiowym o udźwigu 2 500 kg. Urządzenie nowe, gotowe do oglądnięcia. Dystrybutor, gwarancja 12 miesięcy. KLASYFIKACJA ŻURAWIA ZGODNIE Z NORMĄ UNI ISO 4301-1: A3 DYREKTYWY EUROPEJSKIE: 2006/42/WE (Dyrektywa maszynowa) 2004/108/WE (EMC) 2006/95/WE (Dyrektywa niskonapięciowa) 2000/14/WE i kolejne zmiany. NORMY ODNIESIENIA: EN 13000:2010 UNI ISO 4301-2:2011 i kolejne zmiany. NAPĘD KÓŁ: Elektryczny NAPĘD WYSIĘGNIKA: Hydrauliczny ZASILANIE: Akumulator elektryczny MAKSYMALNY UDŹWIG: 2 500 kg MASA ŻURAWIA: 2 500 kg KAT NACHYLENIA WYSIĘGNIKA W GÓRĘ: 60 ° KAT NACHYLENIA WYSIĘGNIKA W DÓŁ: -15 ° RAMA: Zaprojektowana i wykonana przez firmę JMG. Ma budowę skrzynkową i odporną na skręcanie konstrukcję ze stali konstrukcyjnej o wysokiej wytrzymałości WYSIĘGNIK: Wykonany z wysokiej jakości blachy stalowej, formowanej i spawanej. Składa się z jednostki podstawowej, hydraulicznego układu teleskopowego i jednego przedłużenia mechanicznego. Odchylanie i wydłużanie jest realizowane hydraulicznie za pomocą siłowników teleskopowych SILNIK JEZDNY: 2 silniki elektryczne 2 kW, 24 V AC, klasa izolacji H SILNIK POMPY: Silnik elektryczny 3 kW, 24 V DC, klasa izolacji H NAPĘD: Elektroniczne sterowanie prędkością, typ MOSFET AKUMULATOR: 24 V 420 Ah, ze wskaźnikiem ładowania PRZENIESIENIE NAPĘDU: Przednia oś napędzana przez 2 przekładnie zębate KOŁA: Przód: superelastyczne, 18x7-8", 2 szt. Tył: superelastyczne, 15x4 1/2 -8", 2 szt. HAMULCE: Automatyczne na kołach przednich SKRĘCANIE: Skręcanie na tylnych kołach za pomocą silnika elektrycznego. Maks. kąt skrętu ± 90° STEROWANIE: Obsługa za pomocą radiowego pilota zdalnego sterowania UKŁAD HYDRAULICZNY: Zasilany wyciszoną pompą zębatą 3 kW. Siłowniki sterowane przez rozdzielacz elektro-proporcjonalny z radiowym pilotem zdalnego sterowania. Filtr i zawór bezpieczeństwa. Ciśnienie robocze maks. 22 MPa. ZABEZPIECZENIA: Elektroniczny wskaźnik i ogranicznik momentu obciążenia WYPOSAŻENIE STANDARDOWE ŻURAWIA: • Udźwig maksymalny 2,5 t • Napęd na przednie koła poprzez 2 reduktory (po jednym na koło) • Wysięgnik teleskopowy hydrauliczny rozsuwany (1 sekcja stała, 2 sekcje teleskopowane) • Ręczne przedłużenie mechaniczne wysięgnika • Bateria akumulatorów 24 V 420 Ah • Stacjonarna ładowarka akumulatorów • Oświetlenie robocze • Oświetlenie ostrzegawcze • Gaśnica • Sterowanie radiowe wysięgnika i kół jezdnych • Elektroniczny wskaźnik i ogranicznik obciążenia zgodny z normami CE • Kąt wychylenia wysięgnika +60° / -15° • Deklaracja zgodności z normami CE • Instrukcja obsługi, dokumentacja techniczna, deklaracje ZAMONTOWANE WYPOSAŻENIE OPCJONALNE: • Wciągarka hydrauliczna 2,5 t Cpjdpfewtppzex Aa New • Opony nierysujące • System uzupełniania wody w akumulatorach • Ładowarka mobilna zamontowana w pojeździe • Manualny 3 pozycyjny wysięgnik bocianowy 1,0 t

Condition: used, x-travel 6500/13150 mm y-travel 4000 mm z-travel 1250 mm w-travel 2250 mm control Sinumerik 840 D table surface area 5500/12150 x 3000 mm distance between columns 3500 mm max. distance between table and spindle-nose 3000 mm Csdpjwa Dx Refx Aa Njpw max. workpiece weight 70000 / 105000 kg ram head dimension 480 x 510 mm spindle turning speed - stepless 6,3 - 4000 U/min milling spindle motor 63 kW max. torque on the spindle 3300 Nm tool taper DIN 39871 AD ISO 50 feed speeds X/Y/Z= 24000 mm/min total power requirement 120 kVA weight of the machine ca. 245 t dimensions of the machine ca. 29 x 7,7 x 8,1 m The Machine is in almost new condition - in 2020, it was completely retrofit and modernized for 1.6 million Euro! Equipment/accessories: - automatic tool magazine for 153 tools - automatic milling head magazine for 6 milling heads - machining modules/ milling heads: 1. machining module -straight - straight long - 2. machining module -standard angle - 4000 rpm, 144 x 2.5°, ISO 50 3. machining module -narrow angle extended -40 kW, 4000 rpm, 1800 Nm, 144 x 2.5°, ISO 50 4. machining module -universal index - 40 kW, 4000 rpm, 2100 Nm, - C-axis 144 x 2.5° , B-axis +/- 44 x 2.5°, ISO 50 - coolant unit - chip conveyor - technical documentation

Condition: used, Year of construction: 1969, max. wheel diameter 160,175 mm gear width 355 mm max. module 4,5 spindle bore 75 mm centre distance 410 mm min. number of teeth 2, 3 cutter diameter max. 115 mm cutter length max. 105 mm axis distance between cutter and workpiece - max. 138 mm axis distance between cutter and workpiece - min. 30 mm milling head -swivable 120 ° milling spindle speeds 70 - 400 U/min axial-feeds 0,25 - 4,0 mm/U radial feeds 0,09 - 1,5 mm/U total power requirement ca. 9,5 kW weight of the machine ca. 3,5 t dimensions of the machine ca. 1730x1400x1440 mm Equipment/accessories: - Interchangeable wheels - Milling arbors Cedpovzhf Sefx Aa Nepw - Clamping devices - Documentation