Tool cupboard

Eigenbau SK 40

Condition: good (used), Year of construction: 2007, operating hours: 25,033 h, functionality: fully functional, machine/vehicle number: VMD4500023, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, spindle speed (max.): 20,000 rpm, spindle speed (min.): 1 rpm, mount diameter: 40 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, total height: 2,750 mm, total width: 2,480 mm, total length: 3,300 mm, type of input current: AC, torque: 27 Nm, spindle motor power: 11,000 W, Equipment: documentation/manual, The production machine will be available from October 2025! We are pleased to assist you with technical inquiries by phone. Rbjdow Sr Nmjpfx Aaajw

Year of construction: 2002, condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year 2002 Serial number: 122.400 Weight without accessories: 10,980kh - Disc saw with downward cut. - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. - Vertical clamping block with self-adjusting push plate. - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. - Material sensor to automatically switch from rapid advance to work advance. - Hydraulically elevating feed roller for optimum material transport on the saw table. - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. - Chip collector installed on the machine bench. Specs: - Cutting disc housing: 100x4x30x250mm - Cutting disc diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min. - Saw advance speed: 0-400mm/min. - Fast reverse speed: 2000mm/min. Rsdpfxjhzbipj Aaasbw - Total power: 25KW - Working height: 640mm Cutting capacities: 90º cut - Angle steel: 250mm - Steel in U: 400mm - Double T-beam: 600mm - Wide flanged beam: 1008x302mm - Special wing beams: 1000x450mm Cut to degrees: IPBv beam - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478X307mm IPBs beam - 75º: 1008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX1215 Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm - Steel in U (minimum - maximum): 80x45mm - 400x110mm - Double T beam (minimum - maximum): 80x46mm - 600x220mm - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm - Extra wide wings beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Drilling spindle feed rate: 0-500mm/min. Fast spindle positioning tool: 15,000mm/min. Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW MARKING UNIT FEEDING: 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS 4 SIDE ARM FOR SMALL PIECES THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.

Condition: used, X Axis 30.0 in 762 mm Rjdsiypzdjpfx Aaaebw Y Axis 16.0 in 406 mm Z Axis 16.0 in 406 mm Read for inspect Ready for delivery

Condition: ready for operation (used), functionality: fully functional, spindle bore: 42 mm, center height: 165 mm, center width: 635 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 30 rpm, overall weight: 900 kg, Ladies and Gentlemen, We are selling a Colchester Master 2500 lathe with Heidenhain digital readout. The machine is fully functional and can be tested on site. Availability: immediately Center width: 635 mm Center height above bed: 165 mm Center height above support: 105 mm Spindle bore: 42 mm Spindle speed: 30 - 2500 rpm. 16 steps Inner tailstock taper: MK 3 Drive power: 3.7 kW Rsdpeu St S Aefx Aaaobw Space requirement: (LxWxH) 1700 x 880 x 1200 mm Weight: approx. 850 kg

Condition: used, Thread rolling machine ORT RP30U 2-roll Rodpfet H Ty Usx Aaasbw 30 ton swiveling heads variable speed drive #1331 Under power in our warehouse in Gussago BS. Test run possible M i m u Machine Tools Italy Rolling is a mechanical process without chip removal that can be performed cold or hot, having as a purpose the improvement of the surface finish (therefore the fatigue behavior Power (Ton): 30 Number of rollers: 2

Condition: like new (used), Year of construction: 2005, functionality: fully functional, turning length: 450 mm, spindle speed (min.): 25 rpm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 213 mm, travel distance Z-axis: 450 mm, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 30 m/min, bar passage: 65 mm, Siemens 840 D CNC Working area Max. swing diameter on bed 505 mm Swing diameter on X-slide 375 mm Chuck diameter 210 mm Bar capacity 65 mm Transverse travel (X) 213 mm Longitudinal travel (Z) 450 mm Feed rates X/Z-axis rapid traverse 24/30 m/min Main spindle Spindle nose (flat flange) 140 h 5 mm Internal diameter of front bearing 100 mm Spindle motor power (40/100% DC) 16/12 kW Torque (40/100% DC) 153/115 Nm Spindle speed 25 - 6.000 rpm Tool turret Number of tool stations 12 Of which motorized 12 Shank diameter (according to DIN 69880) 30 mm Motor power (40% DC) 9 kW Maximum torque (40% DC) 20 Nm Maximum speed 4.500 min-1 Tailstock Tailstock stroke, automatic 450 mm Center point attachment 4 CM Tailstock thrust, max 400 daN Machine equipment: • Chip conveyor Rbjdpew Adhwsfx Aaaow • Provision for fume extractor • 2 axial motorized modules • 4 radial motorized modules • Fixed tool holders

Condition: used, Year of construction: 2005, Technical details: turning diameter: 275 mm turning length: 900 mm spindle passage: 65 mm power capacity at 100 % load: 25/20 kW spindle turning speed range: 1 - 5000 U/min spindle diameter in front bearing: 110 mm c-axis: 1 - 500 U/min. number of workpiece supports: 4 tool turret: 1 x-axis: 290 mm y-axis: 165 mm z-axis: 360 mm b-axis: 360 ° rapid speed: 18/30 m/min Rodpowp D Nbofx Aaajbw number of tools: 2x2 + 2x2 number of driven tools: 2x2 + 2x2 mm toolpiece turning speed range: 8000 / 2000 U/min power capacity: 25% ED 5,8 kW tool taper: TRAUB 60 tool turret: 2/3/4 x-axis: 170 mm z-axis: 600/950 mm y-axis: +/- 60 mm rapid speed: 18/15/30 m/min number of driven tools: 10 mm toolpiece turning speed range: 1 - 6000 U/min power capacity: 25% ED 5,8 kW tool taper: DIN 69880 40 x 63 total power requirement: 95 kW weight of the machine ca.: 16 t dimensions of the machine ca.: 10,0 x 3,5 x 3,0 m with CNC TRAUB TX 8i, Barloader TRAUB Stamag DNH61 / 3000, Main and Sub spindle with C-axis 1 support with B-axis 3 turret supports dust exhauster, coolant attachment with coalescence-seperator and chip conveyor 2 pc. 3-jaw chuck SMW KNCS-N 170-43 2 pc. HAINBUCH Spanntop chuck 40 pc. various tool holder non-driven 6 pc various tool holder driven Spare parts package *

Condition: as good as new (ex-display), Year of construction: 2023, Control : Heidenhain TNC 640 Travels X : 1,020 mm Travels Y : 520 mm Travels Z : 610 mm Rjdpfx Ajt Dizvjaaebw Clamping surface (L x B) : 1,160 x 520 Table load : 750 kg Spindle Speed : 15,000 rpm direct Tool holder: SK40 (BigPlus) DIN69872 In general Tool changer : 30-stations Machine bed : Meehanite cast Repetitive accuracy : 0.008 mm Equipment Chip conveyor Coolant supply Elect. handwheel high pressure coolant

Condition: excellent (used), 16 end mills with indexable inserts Make Walter Weight 9.5 kg Rsdpfx Aaodx D Tvsaebw

Condition: used, functionality: fully functional, turning diameter: 500 mm, turning diameter over bed slide: 500 mm, turning length: 2,000 mm, SUI 50/2000 – swing diameter 500 mm, turning length 2000 mm Redpfow N D Trjx Aaaebw