Granulate dryer

ERBA EVK 500

Condition: refurbished (used), Stroke power: 180 KN (18 tons). Adjustable speed: 100 - 600 strokes per minute. Adjustable stroke: 4 - 36 mm. In very good working condition. Feeder: BBV 60/60 Max. Strip Width: 60 mm. Max. Feeding Length: 60 mm. Max. Thickness: 2 mm. Hnedpofmavxsfx Addsg With stroke and speed counter. Programmable speed, number of strokes etc. Three working modes: manual, one stroke and automatic. Heavy Duty, for non stop production. Pneumatic clutch and brake. Machine with warranty 6 months. Machine dimensions: 600 mm x 600 mm x 1850 mm. Machine weight: approx 1.2 tons. Power consumption: 2.2 KW. Technical Air: 8 bar. More high speed presses on stock made by Bruderer models BSTA 18, 20, 30, 200, 50 and Schaal and Mabu presses

Condition: used, Year of construction: 1996, charge load 135 liter Hjdpfowcg Erex Addjng 1220 mm tank diameter / tank height 1.220 / 1035 mm 304 mm motor capacity 0,75 kW motor speeds: 1500 U/min voltage 400 V weight of the machine ca. 600 kg dimensions of the machine ca. 1,38 x 1,28 x 1,04 m Dryer - Serial-No.: 15772 / 96-08 - Machine ON: 44.854 h - Heat unit

Condition: new, Year of construction: 2023, Orbital sanders are made for sanding straight, curved and shaped pieces with a round or oval section etc. and with a variable thickness for chair, table, bed and associated items. The machines main features are: Frame in electro-welded steel - Rotating disk with 2 opposing abrasive belts driven by an electric moto, with a revolving movement around the workpiece - Electrical control panel - 2 Adjustable workbenchees (inlet - outlet) - Possibility of fitting 2 automatic workpiece-feeding units with adjustable speed by means of inverter. Abrasive belts: 80 x 1260 mm Min-max. workpiece diam.: 10-100 mm (fi) Min. curvature radius: 200 mm Dimensions: 760x1000x1800 mm Hsdpfxjqnufvo Addjng 3 pieces. Camam, Comec, OMEF, Brusa di Garboli

Condition: new, Year of construction: 2026, The ERBA EVP-RA 350 vibratory finishing machine features a rising, sloped process bowl floor with integrated separation. It is equipped with an easily replaceable screening unit and offers high operational efficiency thanks to the built-in drop step. Discharge and separation are carried out via the integrated flap (manual or pneumatic operation). Upon request, a reinforced suspension and a more powerful motor can be installed for higher loads. The motor speed can be continuously adjusted using a frequency inverter (optional). The EVP-RA 350 can be linked with other machines via its side discharge port. The system can be equipped with a fully automatic PLC control system (optional). ERBA vibratory finishing systems are distinguished by their durability and long service life, based in part on the hot-cast polyurethane lining of the process bowl. Technical data: Hnodpfsn Ut Urex Addeg - Gross volume: 385 liters - Channel width: 340 mm - Vibration motor power: 2.2 kW - Speed: 1,400 rpm - Inner bowl diameter: 1,200 mm All prices are net, excluding the currently applicable statutory VAT and freight costs. Some images may show the machine with accessories that are available as options and subject to additional charges. If you are interested, please contact us. We would be happy to advise you without obligation. The European Commission provides a platform for out-of-court online dispute resolution (ODR platform). This listing serves solely as an online presentation of our products. Contract negotiations are conducted via telecommunications (e-mail, phone, or messaging portal). You will first receive a non-binding offer from us, which will also provide information about our general terms and conditions, legal notice, and your right of withdrawal before any purchase or contract is concluded.

Condition: good (used), Year of construction: 1996, Weinig Unimat 23 four-side planer - German production - grooved top - year of production 1996 - pulling rollers in the table top TECHNICAL PARAMETERS: planed width 230 mm planing height 160 mm grooved top spindle diameter 40 mm 1 lower spindle 7.5 kW Hnjdpfxjh Dwl Dj Addog 2 right spindle 7.5 kW 3 left spindle 7.5 kW 4 upper spindle 11 kW 5 lower spindle 7.5 kW feed smoothly adjustable 6-36 m / min 5.5 kW feed motor power six top steel pulling rollers two upper rubber pulling rollers three pullers in the table top pneumatic feed pressure pneumatic shoe clamp spindles with brakes pre-table length 1970 mm electric height adjustment central lubrication (split) diameter of nozzles 140 mm dimensions of the machine (length / width / height) 410/200/180 cm weight ~ 3000 kg

Condition: used, machine/vehicle number: 632/6, pressure:30 t no. of strokes:100-600 Hub/min sheet width:120 mm table-size:480 x 450 mm Bruderer Double Roll Precision Feed:links Hnedpfscxxycox Addsg stroke adjustable from - to:16-40 mm distance between columns:330 x 300 mm dimensions of the machine ca.:2,10 x 1,65 x 0,75 m with air cooler, piece counter, separate electrical cabinet, air clutch, BRUDERER precision double-roll feeder on left side, machine technically, mechanically and optically as new

Condition: new, The RSM 500 A, a powerful Conventional Cylindrical Grinder from KNUTH, is built to deliver exceptional grinding performance with its robust design and excellent rigidity. Featuring a premium cast-iron machine frame, this grinder ensures optimal conditions for achieving superior grinding results. The machine is equipped with finely adjustable hydraulic feeds that operate smoothly in the longitudinal direction, and a swiveling table allows for precise taper grinding. With a maximum grinding diameter of 200 mm and a grinding length of 500 mm, it caters to a variety of applications. The headstock can rotate 180 degrees for internal grinding, while the hydraulic tailstock, with foot switch operation, enhances efficiency during setup and workpiece exchanges. Standard equipment includes a 2-axis position indicator, internal grinding equipment, and a comprehensive accessory package. Invest in reliability and precision for your grinding needs—request a quote for the RSM 500 A today, a leading choice in the Conventional Cylindrical Grinder category within the Grinding Machines sector. Hodpfoncdx Nsx Addjng

Condition: new, saw blade diameter 315/350 mm capacity 90 degrees: round 125 mm capacity 90 degrees: square 110 mm capacity 90 degrees: flat 160x90 mm capacity 45 degrees: round 105 mm capacity 45 degrees: square 90 mm capacity 60 degrees: flat 80x100 mm total power requirement 1,8/2,5 kW weight of the machine ca. 0,2 t dimensions of the machine ca. 0,6 x 1,22 x 1,06 m The large workshop saw with sophisticated technology. (20070) • For miter cuts right and left up to 45°, end stop at 90° and at 45° left • For sawing steel, stainless steel, and, to a limited extent, aluminum profiles • Vice with quick-release lever, longitudinally adjustable clamping jaw, adjustable guide, and double clamping arm for burr-free cuts • Conical safety clutch made of hardened steel to protect the saw blades. • Large base plate made of solid cast iron for maximum stability and low-vibration sawing • 2 speeds: 30 + 60 rpm Hjdpjd Iin Tsfx Addjng • Powerful special gear with elastic clutch for heavy-duty use • Automatic cooling directly on the saw blade • Saw head with double bearings • 24 V safety switch in the handle with restart lock • Length stop, assembly tool ATTENTION: Price does not include saw blade!!!

Condition: new, GRATMAXX Bürstentgratmaschine The machine is suitable for the deburring of edges on: Round tubes, square tube, rectangular tube, full materials, profiles of all kinds. Materials: Steel non-ferrous metals, plastics, hard or soft. Work flow: After setting the workpiece support and dern side stops the Ridge-workpiece is easily kept on the brush rotating around its own axis, without rotating the workpiece, this movement is also the brush. The workpiece material, the Ridge strength, as well as the desired rounding of the edges determine the pressure and the duration of contact seconds, usually around 1-5. Technical data: Material: Steel, stainless steel and non-ferrous metals (engine speeds 700-1,900 rpm, infinitely variable) Min. workpiece-Ø: 5 mm Maximum work piece-Ø: 100 mm (150 mm) Brush dimensions: 2 piece Ø300 (250) x 50 or 3 piece Ø 300 (250) x 35 Power: 3,0 KW Power: 3.5 KW Operating voltage: 3 ~, 400Volt, 50 Hz Rated current: 8A Back-up fuse: max 16A Control voltage: 24V/DC Width: approx. 500 mm + Handwheel 74 mm, + dust spout 130 mm Altitude: 1.382 mm Working height: approx. 1.080 mm Hnodpfx Adjd Hmnfodsg Depth: 1,209 mm Weight: 310 kg Sound pressure level: At speed 700 rpm 64 dB(A) at a speed 1500 rpm 74 dB(A), when machining a workpiece with maximum speed of 82 dB(A) Scope of delivery: Rotary head Bürstentgratmaschine GratMaxx with power socket without cable Workpiece support table with adjustable angle stop and

Year of construction: 1999, condition: used, Seocnd hand Entex Extruder PL- WE 100 complete with electrical cabinet. Wa in operation for Powder Coatings. For sell is also a Entex Extruder PL WE 70 ( Laboratory ). Hjdebqt Aropfx Addsng Photos on request.