Erlo SEAR 25-RS drill

Erlo

Condition: used, bore capacity in steel (diameter) / mm throat / mm bore stroke / mm Pgodpfexqrhfjx Ac Hsr total power requirement / kW

Condition: excellent (used), Year of construction: 1997, Romanian Lathe SARO SPS 1250x9000, Manufacturer: Saro Targoviste, Year of Manufacture: 1997. Chuck diameter: 1250 mm, Maximum swing over bed: 1250 mm, Spindle diameter: 250 mm, Distance between centers: 9000 mm, Maximum swing over slide: 920 mm, Maximum workpiece weight between centers: 15,000 kg. Grinding attachment available! Video of the machine under power available. Weight approximately 25 tons. Pedpfjy Icbaox Ac Hegr

Condition: used, Brand and Model: ERLO TC-32 Type : COLUMN DRILL Table: 550x550 mm Drill capacity: 32 mm Distance from spindle to column: 360 mm Pedpfx Ajzq R Uqjc Hsgr Max height from table to spindle: 780 mm Drilling depth: 200 mm Tiltable rotating table: Yes Clutch of spindle feed: Yes Speeds: from 93 up to 1420 Drilling Feeds: 0,10-0,18-0,24

Condition: excellent (used), Year of construction: 1988, taper MK 5 spindle diameter 60 mm feed ja m/min Psdpfszmixmsx Ac Hogr weight of the machine ca. 1,1 t

Condition: used, Year of construction: 1970, Weiler lathe with tailstock. Pgsdpfx Ajhtnu Tec Hjr

Condition: new, neu ca. 12 - 14 Wochen ab Auf Spanien 50410 € 952.75 € 35 mm MK 4 390 mm 94- 2.225 (16) 50 Hz 113 U/min M35 1660 mm 1510 mm 2600 mm 910 kg Pgedjynmtxepfx Ac Hjr 180 mm 190 - 650 mm 1310 mm 125 mm 400 x 420 mm 0,10 - 0,18 - 0,24 (3) mm/min 750 - 1.500 U/min ERLO (MADE IN SPAIN) FOR DEMANDING WORKSHOP USE drilling and milling machine automatic feed precision electromagnetic clutches geared drive cross table fixed base and displaceable headstock control panel cooling equipment with electric motor pump hand wheel for fine tuning clamping device for tools adjustable stop drill guard OPTIONAL EQUIPMENT (PRICES ON REQUEST): Digital read out for drilling depth Tapping device Motorized longitudinal and/or transverse feed Digital read out for table axes and/or drill head height adjustment

Condition: new, Year of construction: 2026, bore capacity in steel (diameter) 32.0 mm 35.0 mm bore stroke 150 mm M 22 (St 60) Podpfxsx Dngko Ac Hsgr throat 300 mm 0.1 - 0.2 mm/U MK 4 480 x 480 mm 80.0 - 1.170 U/min 0.90 / 1.35 kW 340 kg 800 x 1000 x 2000 mm Manufacturer's list price: 8.665 EURO Special price on request Equipment: - Column drilling machine - "V-belt drive" - infinitely variable speed adjustment - Manual automatic spindle feed - Thread cutting device * automatic feed reversal RS for thread cutting - pole-changing drive motor - depth scale and adjustable depth stop - Height-adjustable work table * Adjustment with hand crank - Right/left rotation of the drill spindle - Machined machine base incl. coolant device - Machine/work light - Folding drill spindle guard - Emergency stop button at the front - CE marking + instruction manual

Condition: new, Bernardo DG 32 Pro Drill Grinding Machine Pgedpfxogd H U Uo Ac Hor Specifications Drill diameter: 2 – 32 mm Point angle: 90° - 135° Speed: 4800 rpm Motor power: 0.25 kW Voltage: 230 V Length: 350 mm Width: 210 mm Height: 305 mm Weight approx.: 32 kg Scope of delivery • SBC diamond grinding wheel • ER 20 collets, 3 – 12 mm, 10 pcs. (3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 / 12 mm) • ER 40 collets, 13 – 32 mm, 20 pcs. (13 / 14 / 15 / 16 / 17 / 18 / 19 / 20 / 21 / 22 / 23 / 24 / 25 / 26 / 27 / 28 / 29 / 30 / 31 / 32 mm) • ER 20 or ER 40 collet chuck Features • Includes a setup for point grinding, i.e., improved centering of the drill tip on the workpiece and reduction of the required feed force • 30 ER collets included in the scope of delivery, which are also suitable for clamping intermediate sizes • Additional station for back-grinding the drill cutting edges (relief angle) • Universally adjustable point angle from 90° - 135° • Rotor with precision ball bearings ensures smooth running • Fast and precise working results due to simple operation • Vibration-free operation due to high inherent weight and rubber feet

Condition: good (used), Year of construction: 1990, power: 3 kW (4.08 HP), rotational speed (max.): 1,280 rpm, total width: 2,000 mm, total length: 2,000 mm, total height: 2,300 mm, table width: 400 mm, table length: 1,200 mm, Drilling machine Erlo - TCA 45 BV MACH-ID 9361 Make: Erlo Type: TCA 45 BV Pgedpjzcnnaefx Ac Hjr Year: 1990 Max. drill Ø steel:45mm Max. drill Ø cast: 50mm Max. tap Ø: 40M Stroke pinole: 280mm Throat: 470mm Spindle Taper: 5ISO/Bt/Mk Speeds / ranges: 1280Rpm Table Length: 1200mm Table Width: 400mm Power: 3kW Length: 2000mm Width: 2000mm Height: 2300mm Weight: 2800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), ERLO column drill Model TCA 50 EMEL Drill capacity : 50 mm. Capacity threding : M45 mm. Pedpfx Acozfpmzs Hegr Drill movement : 260 mm. Gap from column : 400 mm. RMP. : 45 - 1115 Table size : 560 x 560 mm. Automatic feed with push bottom Threading

Condition: used, Year of construction: 2011, Technical details: turning diameter over bed: 1090 mm turning diameter over support: 690 mm turning length: 1100 mm centre distance: 6000 mm turning dia. in gap: 1250 mm centre height: 500 mm spindle passage: 152 mm range of revolution per miute: 6,3 - 1250 U/min face slide travel: 525 mm tailstock quill taper MT: MK 6 tailstock quill adjustment:: 260 mm cross feed: 0,016 - 19,45 mm/U longitudinal feeds:: 0,032 - 38,9 mm/U number of feeds: 160 spindle bore: 155 mm total power requirement: 30 kW weight of the machine ca.: 10,65 t dimension machine approx.LxWxH: 8,3 x 2,0 x 1,90 m Pgsdpfjzdkz Dox Ac Her The machine is equipped with: Digital Readout (DRO) 4-position tool post Tailstock Rapid traverse Lead screw and feed rod Heavy-duty machine bed Conventional design *

Condition: new, neu ca. 6-8 Wochen ab Auftrag Spanien 8970 € 173.12 € 30 mm MK 3 250 mm 65 - 3.060 (8) U/min 380 mm 600 mm 2060 mm 260 kg 100 mm 170 - 660 mm 1.216 mm 300 x 270 mm 600 x 380 mm ERLO(MADE IN SPAIN) FOR MANUFACTURING USE High quality geardrive machine 2 automatical feed Left-right drilling Automatic tool ejector Adjustable depth stop Pgjdpfxswva Hpe Ac Hjr Table with T-slots Drill guard with micro switch Lightening equipment User manual in English or GERMAN CE OPTIONS (PRICES ON REQUEST): coolant equipment with T-slots in base plate ERB Reverse for tapping IR/RS

Condition: new, Year of construction: 2024, neu 2024 3984 prompt, Zwischenverkauf v Spanien 10090 € 193.73 € 1 32 mm MK 3 250 mm 65 - 125 - 185 - 365 - 54 U/min M24 665 mm 640 mm 2100 mm 260 kg Automatisch 0,10 - 0,20 - mm/U 100 mm 85 - 635 mm 1.170 mm 300 x 270 mm 665 x 400 mm 120 mm ERLO (MADE IN SPAIN) FOR DEMANDING WORKSHOP USE Pgjdpowirzxofx Ac Hjr geardrive machine 3 aut. feeds left-right drilling table with t-slots depth adustable end tool ejector drill guard CE norms user manual in GERMAN Incl. following optional equipment: lighting equipment coolant equipment and machine base with T-slots (symbol photo) OPTION (PRICE ON REQUEST): reverse for tapping Time of delivery with options: approx. 8 weeks

Condition: ready for operation (used), An old Colchester engine lathe is available. Center height: 216mm, swing diameter over bed/cross slide/in gap: 432mm/267mm/711mm, distance between centers: 2000mm, spindle bore: 76mm, speed: 1600rpm, bed width: 343mm. Machine dimensions X/Y/Z: approx. 3200mm/1100mm/1400mm, weight: approx. 2500kg. An on-site inspection is possible. Pjdpfjy E S D Ejx Ac Hsgr

Condition: new, Year of construction: 2024, neu 2024 3983 prompt, Zwischenverkauf v Spanien 7400 € 142.82 € 1 1 32 mm MK 3 250 mm 65 - 125 - 185 - 365 - 54 U/min 1,8 / 2,6 kW M24 600 mm 640 mm 2020 mm 260 kg 100 mm 85 - 635 mm 1.170 mm 300 x 270 mm 600 x 380 mm 120 mm ERLO (MADE IN SPAIN) FOR DEMANDING WORKSHOP USE geardrive machine manual feed left-right drilling table with t-slots depth adustable end tool ejector drill guard CE norms user manual in GERMAN (sample photo) OPTIONS (PRICES ON REQUEST): lighting equipment coolant equipment and machine base with T-slots reverse for tapping Pgsdpowirzrsfx Ac Hjr DELIVERY TIME WITH OPTIONS APPROX. 6 WEEKS.