Press brake

Ermak CNCAP 3100x120

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, 2 identical machines available, year of manufacture 2021. The machines were only operated for a short period in test mode in a large warehouse, then professionally dismantled and stored. Therefore, they remain in very good, fully functional condition. Full documentation for the machines is available. The XF / XP 111 M is a fully automatic strapping machine with a top-mounted sealing unit. It was designed to vertically strap a high volume of pallets of varying sizes with PP or PET strapping. This system is reliable, easy to operate, and can be installed in confined spaces thanks to its compact dimensions. - For PP and PET strapping - Vertical strapping - Tension up to 5,500 N - Siemens PLC S7 - Compact design, minimal space requirement - Easy access to all mechanical components - Simple operation via touch screen Ihedpfx Asw Htz Ijbvew The machines have been properly dismantled and stored – they are available immediately. Additionally, 90 brand-new rolls of original Cyklop strapping material, still sealed in their original packaging, are also optionally available.

Condition: ready for operation (used), Year of construction: 2010, FAT TUR 630AMN x 2000 Iedsw Ecuujpfx Abvehw CNC Siemens 840D Yom: 2010 Turning diameter: 630 mm Turning diameter over top slide: 370 mm Turning length: 2,000 mm

Condition: good (used), functionality: fully functional, Year of construction: 2010, operating hours: 15,996 h, overall weight: 6,750 kg, input voltage: 400 V, 1000 KN Max. stroke: 200 Weight: 6750 Ihodpfotwliwox Abvsw Noise level: 74 dB Year of manufacture: 07/2010 Voltage: 400 V / 50Hz Rated current: Current operating hours: 15,996 hours with manual angle measurement and correction system with safety laser UVV inspection on a regular basis / maintenance always carried out by Amada on a regular basis Accessories: Tool die: 2 pieces UKB 20.478 V8/12 30° 835mm 3 pieces UKB 20.344 V4/V7 88° 835mm Tool holder: 4 pieces UKB substructure for double V die 20.287 + 60.919 835mm Bending swords: 5 pieces UKB 10.261 H100 R0.6/90° 2 pieces UKB 11.158 H80 R0.6/30° 2 pieces UKB 11.200 H66 R0.8/90° Other: Light barrier in need of repair (new price approx. €4500) – separately as a replacement as an attachment (has been renewed) The machine can be inspected under power in DE84051 Mettenbach by appointment. Sale only to commercial customers and with exclusion of any warranty!

Condition: new, functionality: fully functional, Year of construction: 2026, Available in stock Capacity – 500 l. Diesel engine. Self-Propelled. Diesel Burner. Ihedpfsd Swd Usx Abvew Engine fuel tank – 50 l. Oil tank – 30 l. Thermal oil heater – 80 l. Electrically heated hose – 6 m. Heating the mastic through the thermal oil (thermal oil jacket).

Condition: not inspected (used), Press brake Darley Type EHP 260.43/37 year of construction 1992 converted to Delem control DA-56s Without light barriers, does not comply with current UVV regulations CNC back gauge Pressing force 2600KN Motor power 18.5 KW Working width max. 4300mm Ijdpfxsuhf Tze Abvjhw throat 300mm Weight approx. 23,000kg The offer is aimed exclusively at traders within the meaning of §14 BGB No sale to private individuals!

Condition: ready for operation (used), Year of construction: 1997, sheet width 3230 mm plate thickness 2.5 mm thickness at "Niro-steel" 1.5 mm no. of strokes 28 - 42 Hub/min cutting angle 1.60 Grad table height 820 mm distance between columns 3540 mm Control ELGO 87P engine output 6.8 kW weight of the machine ca. 3410 kg. range L-W-H 4070 x 2070 x 1400 mm from a maintenance workshop including special accessories (!!) Equipment: - robust / motorized swing cut guillotine shears - break-proof, torsion-free steel welded construction - compact and clear machine design Ihodpfoxacd Nsx Abvsw - NC electro-motorized back stop - including NC ELGO "TYP 87P" digital control unit * adjustable from the front right * with target/actual value position input * continuous adjustment over the entire travel range * rough adjustment via push buttons * protection of the limit values ??with limit switch - "Duo-Cut" drive with two dynamic, powerful gear motors - support table with recessed grips - hold-down bar with hard rubber strip - all-steel knife with two cutting edges - selector switch for single and continuous stroke - 1x freely movable foot switch - safety device at the rear - original operating instructions Special accessories included: - pneumatic sheet holding device for thin sheet metal cuts - 1x extra long side stop, including support foot + digital stop - 2x extra long, front support arms * with "SLIDING" mount - for easy moving

Condition: new, power 2,2 (3,0) kW (PS) electric outlet 400V 50Hz (3 phases) fuse 16 A dimensions: length 1 735 mm width 1 466 mm Ihsdpfob I Sx Eox Abvow height 1 290 mm insertion resp. discharge height 850 mm weight 350 kg material 1.4301 / AISI 304 lifting force up to 550 kg / bin rotation time 15 sec fruit discharge height 900 mm fruit discharge width 500 mm suitable for standard bulk bins 1 000 x 1 200 x 970 mm scope of delivery hydraulic power unit

Condition: used, functionality: fully functional, actuation type: hydraulic, roller (top) diameter: 420 mm, sheet thickness (max.): 25 mm, Hydraulic cylinder Brand: Casanova Bending length: 3,100 mm Maximum bending thickness: 25 mm Top roller diameter: 420 mm Iedpfx Aeydk D Hobvohw The side rollers are raised parallel, without inclination. New control and command panel, installed and modified in 2003. Equipped with hydraulic flag and hydraulic side table. Pit dimensions: - 200x6800 mm - 555 mm depth

Condition: excellent (used), Year of construction: 1999, Technical Data: Working length: 3050 mm Distance between uprights: 2690 mm Pressing force: 130 t CNC control: DELEM Adjustable backgauge Controlled axes: Z1 / Z2; X; R CNC-controlled crowning Installation height: 535 mm Stroke: 365 mm Throat depth: 410 mm Hydraulic tool clamping top and bottom Ram position measuring system with spring-back compensation via glass scales Program-controlled lower tool shifting (I-axis) for 2 positions Motor power: 12.5 kW Number of backgauge fingers: 2 CE mark Dimensions (L x W x H): approx. 3800 x 2350 x 3150 mm Weight: approx. 14 tonnes Condition: Good condition Iodpfx Abjw Tcncjvohw The seller is not liable for typing or data transmission errors. The machine's appearance, technical condition and wear correspond to its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 2007, Synchronized hydraulic press brake MECOS Mod. Syncro 200/4000. Numerco ESA KVARA control. NR.07 Controlled axes (Y1-Y2-X-R-Z1-Z1-Z1) WILA automatic compensation table. Pneumatic tool attachment: Type Promecam, Tecnostamp H=150 mm. Useful bending length: mm 4050. Isdpfx Abov S Ad Rjvohw Power exerted: Ton 200. Front safety devices: DSP LASER. Weight: kg 24,000.