Complete sawmill (stationary)
Esterer EBB-1400

Name: Esterer EBB-1400
Brand: Esterer
Availability: InStock

Condition

Used

Location

Sankt Pölten Austria

Complete sawmill (stationary) Esterer EBB-1400

Machine data

Machine type:: Complete sawmill (stationary)

Manufacturer:: Esterer

Model:: EBB-1400

Condition:: excellent (used)

Price & Location

Location:: St. Pölten, Österreich

Call

Details about the offer

Listing ID:: A18336426

Update:: 23.01.2025

Description

Band sawmill consisting of:

- Tension carriage EWD EW 1000

- Band saw EWD EBB 1400
- Roller conveyor for transporting the sawn goods (manufacturer SPRINGER)
- Raised cabin
- Tracks
- Control cabinets
- Accessories

Optionally with complete sharpening room equipment:
- Sharpening machine Vollmer CAL 200
- Upsetting machine Vollmer PMH
- Flanking (leveling) machine Vollmer EMS

Log band saw EWD Esterer EBB1400
Vertical band saw for round wood
Roll diameter: 1400 mm
Roll width: 200 mm
Saw blade width: 206 mm
Saw blade thickness max. 1.47 mm
Blade speed max. 55 m/s (winter & summer drive pulley available)
Main motor: 55 kW
The roller crowning was reground in 2009

Band saw carriage EWD Esterer EW1000
hydraulic tensioning carriage
Year of manufacture 1991
Nedpevtwzmsfx Am Tecw
4 tensioning blocks
with 3 log turners
tensioning block opening max. 1000 mm
hook opening max. 930 mm
total length: 6000 mm
total width: 2450 mm
total height: 1750 mm
track width 1300 mm
The band sawmill was bought second-hand in 2004/2005, reinstalled by Esterer, but never put into full operation as cutting is almost exclusively done with the gang saw.

The band saw has only run for 500 operating hours since 2004! very good condition - available immediately - can be demonstrated by appointment

Sharpening room equipment:

01. Vollmer CAL 200 sharpening machine

Year of manufacture 2000

Tooth feed from the left

CNC machine for grinding cutting and

block band saw blades with straight grinding and wet grinding

Full enclosure with extraction

for CBN and corundum grinding wheels

Incl. 2 Borazon grinding wheels 10mm

02. Vollmer PMH upsetting machine

Saw upsetting machine for band saw blades

Max. blade thickness 3.5 mm

03. Vollmer EMS flank/leveling machine

Leveling machine for upset band saw blades converted to self-drive in combination with CAL 200 incl. limit switch on the saw clamping!

Further details:

The sharpening machines were purchased second-hand in 2007 and stored covered on pallets or wooden structures in a dry, heated garage.

Because the band saw was never put into full operation, the sharpening room equipment was repeatedly postponed, so that today the machines are in the same condition as when they were delivered.

All operating instructions, descriptions and circuit diagrams are neatly enclosed in a box.

In 2018 and 2023 the machines were cleaned of surface dust outside, lightly oiled with graphite spray and stored in the garage again!

immediately available - fully functional - very good condition
Location: Austria, near St. Pölten

The listing was translated automatically. Translation errors are possible.

Seller

Registered since: 2020

46 listings online

Call

Send inquiry

Telephone & Fax

+43 7752 ... show

These listings may also fit your interest.

Listing

Weidenthal

1,379 km

Vertical machining center
HurcoVMX 42

€14,000

EXW ONO plus VAT

Call

Condition: used, Year of construction: 2006, functionality: fully functional, travel distance X-axis: 1,060 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller model: Ultimax, total height: 2,800 mm, total length: 2,200 mm, total width: 2,400 mm, table width: 610 mm, table length: 1,270 mm, spindle motor power: 18,000 W, number of spindles: 1, number of slots in tool magazine: 24, Equipment: chip conveyor, documentation/manual, 3 axes Tool holder SK 40 Internal coolant Nodpfewtdzrex Am Tocw 35 kVA approx. 7550 kg Comprehensive tool package available separately

See details

Listing

Bollegraaf HBC140s (2x75kW) Bollegraaf HBC 140

Siddeburen

709 km

Bollegraaf HBC140s (2x75kW)
BollegraafHBC 140

Call

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: HBC 140 2x75kW 2001 (210-008-01), pressing force: 155 t, bale weight: 1,500 kg, pressure: 250 bar, power: 150 kW (203.94 HP), year of last overhaul: 2024, Equipment: documentation/manual, Sold by Bollegraaf Recycling Solutions, the original manufacturer of this Bollegraaf baler and conveyor: Bollegraaf HBC140s Baler (2x75kW). Baler: Weight: 47.100 kg Construction year: 2008 Hardox bottom floor plate only Variable channel pressure control Plastic valve Hydraulic pump driven by frequency inverter Anti-rat cabling Oil in-depth filtration Modem Hours 40.000 This baler can also be sold fully refurbished according to the 'Bollegraaf OEM Certified Refurbishment standards'. This includes 2 year guarrantee. Contact us for more information or a quotation. General principles of refurbishment Cleaning & disassembly Before the actual refurbishment takes place the baler is completely cleaned and disassembled in our refurbishment workshop. Tolerances After the disassembly the tolerances of all steel components are measured and re-welded where necessary, this at least applies to the following components; • Ram, • Frame, • Channel, • Pre-press-flap After disassembly and inspection the ram is welded-up again and fitted with new ram wheels. The protective grids and the pre-press flap are made dent-free and repaired where necessary. Repainted After measuring the tolerances and any repair- and welding work, all components are being blasted and coated again. Hydraulics: The hydraulic tank is cleaned. The hydraulic lines & hoses are replaced. The hydraulic components are repackaged. The hydraulic oil is replaced. Njdotvau Aspfx Am Tscw Cabling: All cabling is checked and replaced if necessary. All junction boxes are replaced and placed back in easily accessible positions. Wear parts: All wearing parts are replaced. The pins and shafts of the cylinders and the channel are replaced with new ones. All wearing parts of (both) needle installations and knotters are replaced for new. Cylinders: The cylinders are repackaged and, if necessary, provided with a new chrome layer or a new cylinder rod. MCC Cabinet The switch box is checked and cleaned. If necessary, electronic components are replaced with new ones. The PLC and HMI (human interface) are replaced with the latest Schneider M340 version including the latest software.

See details

Listing

Spare parts for CELASCHI DET CELASCHI TSA

Marano Vicentino

1,501 km

Spare parts for CELASCHI DET
CELASCHITSA

Call

Listing

Gusselby

1,207 km

Complete sawmill (stationary)
Söderhamn

Call

Condition: excellent (used), functionality: fully functional, Söderhamn small log line with Euromill profiles Debarker Cambio 45 with infeed and guide work after 2D scanner Njdowp E E Dspfx Am Tocw Söderhamn 447 infeed 240-12 chipper canters Block tilt and infeed 240-12 chipper canter Euromill profiles Board separator with adjustable center Chip conveyor under saw line Hydraulic units and electrical cabinet.

See details

Listing

Landau an der Isar

1,331 km

Length sorting system
Esterer

Call

Condition: good (used), Board sorting system / sorting system / length sorting system, Esterer Right-hand discharge 5 sorting bins Total length 26 meters 1. Bin: 2 meters 2. Bin: 3 meters 3. Bin: 4 meters 4. Bin: 5 meters 5. Bin: >5 meters In good condition – immediately available Location: Germany, near Landau an der Isar Nedogw Scqepfx Am Tocw Please also check out my other listings. I look forward to your inquiry.

See details

Listing

Overhead crane ± 11.550 mm x 5.000 kg Demag EPKE

Maarheeze

753 km

Overhead crane ± 11.550 mm x 5.000 kg
DemagEPKE

Call

Listing

Sanding machine Bütfering Optimat SGO 211 RC Bütfering Optimat SGO 211

Germany

856 km

Sanding machine Bütfering Optimat SGO 211 RC
BütferingOptimat SGO 211

Call

Condition: used, Year of construction: 2008, machine/vehicle number: 0-411-49-1873, Technical data: - Manufacturer: Bütfering - Type: Optimat SGO 211/RC - Number of grinding units: 2 - Year of manufacture: 2008 - Working width: 1.100 mm - Grinding belt width: 1.120 mm - Grinding belt length: 1.900 mm - Workpiece thickness: 3-160 mm - Feed speed: 2,5-13 m/min. - Table height adjustment Standard equipment: - Automatic workpiece thickness adjustment - Stepless feed speed via requency converter. - 125 grinding programs can be stored - Wear-free braking system 1. Grinding unit (R) - Calibration roller - Profiled steel contact roller - Diameter 160 mm - Drive motor: 15 kW 2nd grinding unit (C) - Combination unit with roller and grinding shoe - Rubberized contact roller 65 Shore - Contact roller diameter 160 mm - Electronic link pressure bar with segment width 35 mm. - Belt speed: 12 and 21 m/s - Tolerance compensation up to 1 mm - Suitable for veneered surfaces and solid wood. - Drive motor: 11 kW Njdpfx Ameyh Hwuj Tjcw - Total connected load: approx. 28 kW - Operating voltage: 400 V / 50 Hz. - Compressed air consumption at 6 bar, 20 L/min. - Belt blow-off device per pressure surge 440 L/min. - Extraction volume: approx. 2,880 m3/h/ at 20 m/s - Extraction connection: Dedusting: 1 x Ø 160 mm (grinding unit, roller) 1 x Ø 160 mm (grinding unit, shoe) Dimensions: - Length: 1,700 mm - Width: 1,850 mm - Height: 2,100 mm - Location: not in stock - Available from April 2026

See details

Listing

Complete sawmill (stationary) Wood-Mizer WB 2000

Schmallenberg

905 km

Complete sawmill (stationary)
Wood-MizerWB 2000

€96,000

ONO plus VAT

Call

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, For sale: Wood-Mizer WB2000 Bandsaw (Year of manufacture: 2020) Offered for sale is a Wood-Mizer WB2000 from 2020, which has only been in operation since 2021. The machine has been regularly maintained, used very little, and is in excellent technical condition. Technical specifications: powerful 30 kW electric motor Log diameter up to approx. 1 m Njdpfsyha Ipex Am Tocw Cutting width up to about 90 cm Load capacity approx. 6 tons Suitable for 90–100 mm wide band saw blades Equipment (included): complete loading/infeed conveyor outfeed table with three-way material distribution (left / right / straight ahead) Camera system for cut monitoring PRO operator panel with touchscreen retrofitted quick-clamping system The machine can be inspected and tested on site; everything works perfectly.

See details

Listing

Estonia

1,748 km

TC, TU, TZ profile production machines
TC, TU, TZ profilių gamybos staklės

Call

Condition: excellent (used), Lightly used automatic TC, TU, TZ profile production lines, designed for manufacturing and roll forming TC, TU, TZ profiles up to 1.5 mm metal thickness. Ncodpfjx Sx R Ssx Am Tsw Technical Specification: Manufactured in: Estonia Adjustable profile height: 100 – 250 mm Profile width: 50 mm Profile edge (folded): 15 mm Minimum rollable sheet thickness: 1 mm Maximum rollable sheet thickness: 1.5 mm Roll distance: 300 mm Machine dimensions: 900 x 4000 mm The machine is not equipped with a guillotine or perforating rolls. Operation is straightforward, controlled via two buttons. If you have further questions, we will be happy to answer them.

See details

Listing

Corrugated line LUM Corrugated line 5 ply

Sofia

2,385 km

Corrugated line
LUMCorrugated line 5 ply

Call

Condition: used, Year of construction: 2024, functionality: fully functional, Corrugated line 5 ply. Fully renewd 2024, 1650mm width. Steam matic, boiler steam producing 2500 kg/h. Max pressure 19 bar. Speed up to 70 metr per min. 1.⁠ ⁠Total Length: 55 metr 2.⁠ ⁠Total Power: 150 kw 3.⁠ ⁠Frame with shaft 4.⁠ ⁠Corrugated paperboard marching: diameter of corrugated rouer, electric adjust speed moter used. 5.⁠ ⁠Double cylinder gum mounting marchine: On the adoption, inside two layers draw the gun, dascend to carry the paper lead the paper roller. Machine exists units: Hydraulic shaftless mill roll stands, Spindle ¢ 240mm, hyperbolic heavy rocker, expand chuck , multi-point brake, hydraulic drive lifting, panning left and right on the middle. Ncsdpfew R Sknsx Am Tsw Top paper preheat cylinders and core paper preheat cylinders. Both preheat 360 degress area. Single Facer Double Facer Blade scorer NC helical knife Glue system Gas system Steam system producing 2500 kg/h. Max pressure 19 bar. Working 12 bar. Top paper index 100g/㎡--180g/㎡ Ring crush index（N.m/g）≥8 (Water containing8-10%) Core paper index 80g/㎡--160g/㎡ Ring crush index（N.m/g）≥5.5 (Water containing8-10%) In paper index 90g/㎡--160g/㎡ Ring crush index（N.m/g）≥6 (Water containing8-10%)

See details

Advertise here