Gang saw

Esterer

Year of construction: 1979, operating hours: 10,968 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: Werk-Nr. 8725, INFORMATION REGARDING SALES AND CONTRACT CONDITIONS: MACHINE CONDITION: This ESTERER frame saw, model LSH 65, was in impeccable operational use until three years ago and remains serviceable. The equipment includes both a stationary control panel in front of the saw frame and a mobile control panel on the tensioning carriage. A hydraulic tensioning device for adjusting the saw blades in horizontal and vertical directions is mounted on the frame. The electric motor drive with gearbox is included in the offer. HANDOVER AND PRICE: Handover will take place after full payment of the purchase price. The price is ex foundation and is payable on-site directly to the seller after conclusion of the contract and prior to dismantling. WARRANTY: The seller assumes no warranty, neither before nor after handover of the machine – sold as seen. The buyer has no right of withdrawal. Nwjdpeyl Afrjfx Abdoc DISMANTLING: Complete dismantling, including lifting gear, tools, and transportation, is the responsibility of the buyer. Handover of the machine shall take place on-site. Any damage caused to the building during dismantling will be repaired by the buyer or charged separately. The purchase transaction will be mutually confirmed by means of a sales contract.

Condition: like new (used), Year of construction: 2008, Üstünkarli UDKP 160 Nwodpsucnudjfx Abdec Cutting height 160 mm Chain bed approx. 420 mm With spikes in the chain bed Including slat bush and spacer rings Main engine 75kW

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, Esterer full-frame saw, model HDS 600, year 1990. Passage width 735 mm, stroke 600 mm. Includes switch cabinets, operator control panels, and drive motor. The machine fits on the foundation of the HDS 700. Can be inspected at Scheibner GmbH, 36110 Schlitz. Nedpfx Abormmqzedewc

Condition: excellent (used), CATALOG NUMBER 7680 TECHNICAL DATA - Max. blade diameter: 500mm - Spindle diameter: 30mm - Hydraulic blade stroke - Max. cutting width: 500mm Nwjdpfxoyg Im Rs Abdjc - Max. cutting height (in the center, with a 500mm blade): 160mm - Main motor: 4kW - Table dimensions: 715x1070mm - Table height from base: 790mm - Roller tables: 2 pcs - Table dimensions: - Infeed length/width: 2000x640mm - Outfeed length/width: 2000x640mm - Machine dimensions (L/W/H): 1400x940x1070mm - Total weight: 480kg ADVANTAGES – 2 roller tables – Hydraulic blade stroke – Used saw, in very good condition Net price: 15,900 PLN Net price: 3,780 EUR (based on rate 4.2 EUR) (Prices may change due to strong fluctuations)

Year of construction: 2011, condition: like new (used), For sale is 1 roller conveyor incl. one geared motor each: Technical data: Year of construction: 2011 Length: 12,75m Njdpfjihpn Nex Abdswc Width: 1.40m Height: 1.00m Loading: 4 tons possible Gear motor per roller conveyor: SEW-EURODRIVE R87 DREE90L4 (for further details see picture on the type plate) Three of the four roller conveyors have a wooden wall on one side over the entire length and one roller conveyor has a side wooden wall with a length of 5.20! Two of the four roller conveyors are each equipped with 3 lateral removal systems. (see pictures)

Condition: refurbished (used), 1 set = 8 guides suitable for the ESTERER SS 71 or SS 56 gang saw, completely refurbished, i.e. all sliding surfaces re-milled to precise angles. 1 set of upper guide shoes, bore 110 mm Ø, height 250 mm 1 set of lower guide shoes for bearing 6210 for SS 56 Nwjdpfx Abjw Eu Akodsc

Year of construction: 1982, condition: good (used), pre-cutting saw Esterer KSG-F year 1982 travelling with swords with control with length measuring with frame with hydraulics immediately available Nsdpeip T Dlofx Abdswc Location: Austria, near Vienna

Condition: good (used), Year of construction: 1989, functionality: fully functional, planing width: 2,050 mm, height adjustment type: pneumatic, planing height: 300 mm, four-side planer, width: 2200 mm, on a rotary table for curved pieces, enclosed machine Njdpfx Abjw A A Ebjdswc

Condition: used, Year of construction: 1976, Esterer LSH Sash Saw 1976 - Automatic cantilever adjustment - Hydraulic roller lifting - Swing frame - With templates - With magnetic holder - With Jansen saw tensioner - With Esterer Arta-C riving knife - With drive motor - With saw blades - With intermediate gear Clearance width: 650 mm Clearance height: 90–620 mm Njdpfjyhduyjx Abdjwc Stroke: 500 mm Feed speed: 0–8 m/min Feed power: 3.5 kW Pulleys: 900 mm Total weight: 5.4 t Fits the foundation of the Esterer LD65 sash saw. Has been stationary for around 15 years. Dismantled and stored approx. 3 years ago. Annual cut approximately 3,000 solid cubic meters. Very good condition – immediately available – fully functional Location: Austria, near Graz

Year of construction: 1998, condition: excellent (used), functionality: fully functional, Very stable creel roller conveyor with hydraulic lift and lowering cross conveyor. 1st part: Length 7,100 mm. Roller length 2,000 mm. Roller diameter 220 mm. Overall height 1,000 mm. Built-in hydraulic lifting and lowering cross conveyor With 4 chain strands. Spacing: 1,500 - 1,300 - 1,000 mm. Fully plated. Nwodpfx Ajt Hg Hujbdsc Hydraulic model support rollers. Drive via geared motor. New bearings. 2nd part: Length 7,200 mm. Roller length 1,600 mm. Conveyor length 6,100 mm. Built-in hydraulic lifting and lowering cross conveyor with 6 chain strands. Unsupported, it is possible to convey the cut material under the roller conveyor to the left or right. Fully plated. Including hydraulic unit for both roller conveyors.

Condition: used, Year of construction: 2002, operating hours: 37,000 h, machine/vehicle number: 1651, arm reach: 15,200 mm, load capacity: 1,900 kg, track width: 3,000 mm, Equipment: cabin, crane, Year of manufacture: 2002 Machine number: 1651 Track, m: 3.0 Crane type: OBX II (year of manufacture 1997) Reach: 15.2 m Load capacity without grab: 1,900 kg / 15.0 m Grapple: included Crane arrangement: behind the cabin Cab side: middle !! Sold on behalf of the customer!! Nwjdpfsv Hwk Uox Abdsc

Condition: excellent (used), Spare parts for creel LSH 65, partly as good as new, new and used. Swing, stilts, hydraulic cylinders, chain drives, feed gears, Njdji T Egpjpfx Abdowc guides, solenoid valves, overhang parts. Saw frame top and bottom, Saw hook with insert hinges. Pulleys. Spare parts also available for Esterer sash gang SS 71.

Year of construction: 1990, condition: excellent (used), 1 piece mass balancer for creel. With complete accessories and attachments. Nsdefm Ev Rjpfx Abdowc Little been in use.

Condition: excellent (used), 200m3 stainless steel tanks Number of items: 3 Nodpfxjfngl Ns Abdowc 180m3 stainless steel tanks The diameter is 4.70m Height without legs is 14m 4,1mm wall thickness 5,1 bottom thickness We offer transport with our specialized trailer to every region of Europe!

Condition: excellent (used), 2 pieces stilts for Esterer creel type EHD 30. Only 6 years in use. Nodpfeip Uf Uex Abdswc Also for other Esterer creel types stilts and spare parts available.