Planer-type milling machine - double column

F. Zimmermann FZ 25

Condition: excellent (used), For sale: OMIS 5 TON bridge crane, ideal for industrial use in a warehouse or factory building. 🔧 Main features: Predpfx Ajy Aymijbusc Capacity: 5 tons (5000 kg) Type: double-girder overhead crane Brand: OMIS (Italy) Span (rail distance): 20,000 mm (20 m) Hook travel: 6.6 m Robust box girder structure ⚙️ Performance: Lifting speed: 4 m/min Bridge travel speed: 30 m/min (fast) – 7.5 m/min (reduced) Trolley travel speed: 16 m/min Power supply: 380V three-phase – 50 Hz Pendant push button controls 🏭 Usage: Always operated inside a covered industrial building Ideal for workshops, steel fabricators, and heavy-load handling

Condition: excellent (used), Year of construction: 2020, travel distance X-axis: 8,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 2,500 mm, rapid traverse X-axis: 35,000 m/min, rapid traverse Y-axis: 40,000 m/min, rapid traverse Z-axis: 40,000 m/min, total width: 5,800 mm, total height: 4,500 mm, total length: 13,500 mm, table length: 10,000 mm, table width: 1,250 mm, Travelling Column High performance, precision and machining power Linear guiding of RAM combined with Hydrostatic Guiding HDS ACD2 Milling head with 5000 Rpm and 1400 Nm torq Aitek ATC chain 60 position with L=400 and 250 diameter x 35 Kg Filtration with IKZ 15 Bar Chip conveyor BLUM 3D Measuring probe Wide bed linear guided in X-Travel W=930 mm Rotary table driver prepared in E-Cabinet X-Axis: 8000mm Y-Axis: 1300mm Z-Axis: 2500mm Table Length: 10000mm Table Width: 1250mm Power on spindle: 40kW Prjdpfxjyr Dmds Abuoc Spindle speeds: 5000Rpm Spindle Taper: 40ISO/Bt/Mk Feed rate X-Axis: 35000mm/min. Feed rate Y-Axis: 40000mm/min. Feed rate Z-Axis: 40000mm/min. Millinghead auto-index:0.001 x 0.001 Gr° Working hours: 3800H Length: 13500mm Width: 5800mm Height: 4500mm Weight: 45000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2009, Control: Heidenhain iTNC 530 Spindle * Diameter: 180 mm * Taper: ISO 50 * Power: 51 kW * Speed: 2,000 rpm (2-speed gearbox) * Torque: 2,668 Nm * Spindle support: 550 mm * Internal high-pressure coolant Travel distances * X: 5,000 mm * Y: 3,500 mm * Z: 2,350 mm * W: 1,000 mm (quill permanently extended 200 mm, at maximum travel – total reach 1,200 mm) Table Pjdjy R N Ilepfx Abuorc * Size: 2,000 × 2,500 mm * Load capacity: 28 tons * Hydrostatically supported * B-axis positioning: 0.001° (double pinion, backlash-free) Other features * Tool changer: 60 positions * Siemens axis and spindle motors * Linear scales on all axes + rotary encoder on rotary axis * Handwheel HR 410 * Chip conveyor

Condition: used, TECHNICAL DETAILS - Number of spindles : 2 - Number of axes : 4 MAIN SPINDLE - Spindle nose : A2-8 - Spindle speeds : 3000 [rpm] - Max. bar diameter : 80 [mm] - Max. turning diameter : 300 [mm] - Max. diameter on bench : 520 [mm] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Spindle speeds : 6000 [rpm] - Max. bar diameter : 53 [mm] - C axis indexing precision : 0.001 [°] - Travel : 520 [mm] TURRET - Number of positions : 12 - X/Z stroke : 230 / 460 [mm] - Live tools speed : 4500 [rpm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 22.5 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3050 x 1860 [mm] - Machine height : 1.850 [mm] - Machine weight : 5500 [kg] EQUIPMENT - CNC : OSP-P300L-R - Coolant tank * with high-pressure pump - Chips conveyor - Parts catcher - Parts conveying strip - Bar loader : Top Automation FU352 Pjdpfx Asuhbnnjbusrc - Fire extinguisher * * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer.

Condition: used, Table unit from a DROOP & REIN portal milling machine Clamping plate with T-slots made of cast steel gray cast iron Podpfxothuzpo Abuerc Table unit with clamping plate and very solid guideway Table clamping surface 5500 x 2000 mm Travel of the table clamping plate approx. 3100 mm Table height 1050 mm Table load: max. 20 tons Ball screw: Ø 100 mm Thread pitch: 20 mm (single-start) - Processing table guided very stably on the bed - Metal telescopic guideway cover - comes from a DROOP & REIN portal milling machine - Longitudinal table movement via ball screw and SIEMENS servo motor - Clamping surface with 11 T-slots 28 mm - Drive via SIEMENS 1FT6134-6AB71-1AG2 servo motor with IC200448S/R encoder (RN 000 B25) Total length 9500 mm Width 2000 mm Overall height 1050 mm dead weight 28 ton. good condition

Condition: like new (used), Year of construction: 2021, functionality: fully functional, overall weight: 250 kg, load capacity: 25 kg, controller manufacturer: Yaskawa, controller model: YRC1000, teach pendant manufacturer: Yaskawa, Equipment: documentation/manual, Industrial robot YASKAWA GP 25 Control unit YRC 1000 This robot was only used as a demonstration robot. Only about 600 operating hours. Ready for collection. Prsdsxb T Syjpfx Abuoc

Condition: used, Year of construction: 2012, Technical details: max. wheel diameter: 260 mm gear width: 320 mm max. module: 5 weight of the machine ca.: 21 t Prodpfxoy Amlls Abusc dimensions of the machine ca.: 8,71 x 5,97 x 3,49 m no. of teeth: 1...999 max. helix angle: +45/-45 ° pitch min.: 0,1 mm pitch max.: 1000 mm X-axis: 345 mm y-axis: 250 mm Z-axis: 320 mm b-axis: 360 ° c-axis: 360 °

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, turning length: 1,275 mm, turning diameter: 481 mm, spindle motor power: 26 W, spindle speed (min.): 20 rpm, spindle speed (max.): 2,800 rpm, spindle bore: 102 mm, travel distance X-axis: 260 mm, travel distance Z-axis: 1,350 mm, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 30 m/min, type of input current: three-phase, total height: 2,110 mm, total length: 4,636 mm, total width: 2,035 mm, spindle nose: ASA 11, overall weight: 6,900 kg, Equipment: documentation/manual, rotational speed infinitely variable, USED ​​2-axis CNC lathe "DOOSAN model PUMA GT3100L" complete with chip conveyor. Pedpfx Aex N R E Asbusrc

Condition: good (used), Year of construction: 2007, control 840 D x-axis 2500 mm y-axis 2500 mm z-axis 1700 mm Control system - Siemens Sinumerik 840 D Max. workpiece weight - 6000 kg Spindle diameter - 130 mm Quill stroke - 700 mm Tool holder - ISO 50 DIN 69871 - AD Max. torque at the spindle - 1847 Nm Total power requirement - 65 kW Machine weight approx. 45 t Space requirement approx. 10.9 x 9.3 x 5.7 m Prodpewzyp Uefx Abusc

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, number of chambers: 1, actuation type: electric, Equipment: CE marking, documentation/manual, In-stock item, available for immediate delivery -Tmax 1350°C -Usable space LxWxH (mm) 600 x 500 x 500 -Batch weight 300 kg -Normal operating pressure 10⁻³ mbar -max. cooling gas pressure 6 bar abs. Prjdpezr U Anefx Abuoc -External dimensions LxWxH (mm) 4200 x 2500 x 3500 -Space requirement LxWxH (mm) 5000 x 5000 x 4000 -Weight (net) 13000 kg -Total connected load 125 kVA -Connection voltage 400 V -Current fuse 250 A -Control system: Stange SE 607 -Documentation Included: -Protective gas buffer tank -Vacuum pump stand -4-flap design for cooling, allowing the flow direction of the gas flow to be adjusted horizontally or vertically. -Option for liquid nitrogen connection, enabling cooling to -80 °C inside the furnace. -Internal insulation made of graphite hard felt, protected and reinforced with CFC. You can find the detailed description as a PDF in the advertisement! We offer new and used industrial furnaces. Inspections in our warehouse are available upon request! Industrial furnace, vacuum furnace, vacuum furnaces, vacuum hardening furnace, hardening furnaces, sintering furnace, sintering furnaces.