Beverage Mixer

Famix 6000-2K

Condition: used, Year of construction: 1995, machine/vehicle number: 1663459, Druck- und Vakuumkompressor - Pressure and Vacuum Pump Rietschle SKP 35826-02 (03)Baujahr / Year 1995 - SN. 1663459 Frequency 50 Hz Speed 2900 min power required 3 kW Online-Video-Inspection by Skype-Video Rjdpfx Aaeh Axlpeaer We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Year of construction: 2000, condition: excellent (used), Atlas Copco Crepelle high pressure compressor Type: D44 Year of manufacture: 2000 Operating pressure: 40 bar Power: 220 kW Speed: 839 RPM Compressor can be inspected at any time. Rsdpfsf Hly Sex Aaaer

Condition: used, Year of construction: 1993, Overview  The following 6 component mixer was built in 1993 by the German manufacturer Famix. The mixer can be offered completely overhauled and with warranty. The machine is available immediately in its current condition.  Technical details  Capacity: max. 30,000 l/h beverage   6-component mixer  Dimensions (LxWxH): 3,200mm x 1750mm x 2800mm   Flow meter  Dosing pump  Vacuum degassing  Brix measurement  CO2 measurement  CO2 pressure control  Conductivity measurement   Electrical data  Operating voltage 400V/230 V 50 Hz  Control voltage 42V AC  Rjdpfx Aaevcp U Rsajr

Year of construction: 1998, condition: like new (used), Rotary piston filler Make: Engler Type: K12 Left frame: Completely stainless steel adjustable filling volume up to 550ml Capacity: up to 7.500 bottles per hour Rodpfx Ajg D Un Deaaer Power supply: 380 Volt - 50 Hz - 4.5 kW Dimensions: L x W x H = 2.500 x 2.100 x 2.500 mm Weight: 1.250 Kg Features: adjustable bottle height and filling volume including conveyor belt central product tank with level control

Condition: used, Year of construction: 1994, Three-stage water degassing system for water degassing and CO2 impregnation. The raw water enters the first degassing tank through an injector nozzle. The high flow velocity causes oxygen and nitrogen to be torn out of the water jet and escape from the top of the tank. This process is repeated in the second degassing tank. In the third tank (impregnation tank), after entering through the injector nozzle, the water is mixed with the CO2 pressure in the upper part of the tank, which is under impregnation pressure. Additional title: multi-stage cold deaeration with impregnation Rodpfexzqt Isx Aaaor Base construction: mounted on stainless steel frame Features: 3 containers (each with pressure gauge); 3 centrifugal pumps; control cabinet with control panel; pipes with various fittings

Condition: used, Year of construction: 2011, Overview  This Heuft Glas InLine reflexx IR is an inspection machine for empty bottles, designed for quality control in filling lines. The machine has a maximum output of 46,000 bottles per hour and was originally delivered in December 2011. It is in very good condition and ready for use at short notice. The flow direction is from left to right and it is equipped with a Secomak blower instead of a compressed air blow-off system. Technical details  Output: Maximum 46,000 bottles/hour Flow direction: Left to right Equipment: Two triggers Secomak blower Transponder recognition for RFID test bottles Rejection monitoring Heuft HLAN network (can be retrofitted as an option) Two-way rejection Delta K to the right Four type licenses Delta K tripods for belt height of 1130 mm Two fluids for lye detection Missing components Infeed control (must be added if required) Thread blow-off (must be added if required) Documentation (not available, can be replaced) Controls  Monitoring of the incoming bottle flow (optional) Output of a stop signal if bottles are too high, too wide or lying down Inspection of the bottle base Inspection of the mouth sealing surface Inspection of the thread Inspection of the inner and outer side wall Detection of conductive liquids (e.g. lye) Detection of residual liquids (e.g. oils, paints) using IR technology Rejection of faulty containers or output of a rejection signal Monitoring of the rejection process Rsdou N Snkspfx Aaaor

Condition: used, Year of construction: 2022, lifting height: 150 mm, load capacity: 1,500 kg, - Fahrgeschwindigkeit beladen / unbeladen km/h 4,2 / 4,4 - Hubgeschwindigkeit, beladen / unbeladen m/s 0,015 / 0,022 - Max. Steigfähigkeit beladen / unbeladen % 6 / 16 - Betriebsbremse: elektromagnetisch - Antriebsmotor Leistung 60min kW 0,6 Rsdpfoxfl Rpsx Aaasr - Hubmotorleistung bei 10 % kW 0,50 - Batteriespannung, Nennkapazität V/Ah 24/20 ( 20/30 | 34/36 ) - Gewicht der Batterie kg 4,6 - Energieverbrauch nach VDI-Zyklus kWh/h - Art der Antriebssteuerung: DC-Drehzahlregelung - Schallpegel am Ohr des Fahrers nach EN 12053 dB(A)

Condition: used, Year of construction: 1999, Overview  This high-pressure air compressor was manufactured in 1999 by the Belgian company Atelier François (AF). The CE68 ASG model is designed to supply compressed air at 40 bar, specifically for PET bottle blowing applications. The compressor is still installed and connected, has been regularly maintained, with the last maintenance carried out in August 2025, and is immediately available for inspection or sale. Technical data Operating Pressure: 40 bar Air Capacity: 2,100 Nm³/h Application: PET bottle blowing Condition: Still connected, operational Last maintenance: August 2025 Availability: Immediate Rjdpfxeyb Tg Ej Aaaer