Cylindrical Grinding Machine

FERREL Giustina

Condition: good (used), total width: 3,500 mm, total length: 19,000 mm, total height: 2,100 mm, workpiece weight (max.): 6,000 kg, grinding diameter: 850 mm, grinding length: 6,000 mm, center height: 425 mm, Cylindrical grinder Schmaltz - RM 82/6000 MACH-ID 9492 Make: Schmaltz Type: RM 82/6000 Centre height: 425mm Psdpoy Dr Easfx Am Tegp Grinding Ø: 850mm Grinding length: 6000mm Grinding stone dimensions:1100 x 80 x 560mm Grinding stone speeds: 700Rpm Table inclasement: -5 to +5° Tailstock: 160 x 100Mk Length: 19000mm Width: 3500mm Height: 2100mm Weight: 31000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2007, Technical details: turning diameter: 220 mm turning length: 310 mm total power requirement: 17 kW weight of the machine ca.: 3,3 t dimensions of the machine ca.: 2,25 x 1,63 x 1940 m greates pass round over bed: 430 mm bore diameter: 45 mm centre distance: 687 mm slide travel radial ( X-axis ): 160 mm Pgedpfx Amex Aq Hwe Top slide travel axial ( Z-axis ): 310 mm spindle turning speed range: 0-6.300 U/min

Condition: used, Year of construction: 1983, grinding length 8400 mm grinding width 1450 mm workpiece height 1250 mm surface area 8000 x 1250 mm table height over floor 920 mm distance between columns 1470 mm workpiece weight max. 59700 kg weight of the machine ca. 59,7 t dimensions of the machine ca. 22 x 5 x 5 m Adjustment ranges: -Crossbeam, vertical 1250 mm -Grinding support, horizontal 3100 mm Adjustment speeds: -Machine table (X-axis) infinitely variable 1-45 m/min Table creep speed 5 m/min -Grinding support, horizontal (Y-axis) Rapid traverse 3000 mm/min Feed, step 0.001-0.099 mm Feed rate, continuous 100-3000 mm/min Pgjdpsvr Hgvjfx Am Tep Creep speed 18+1 mm/min Tip infeed 0.001-0.019 mm -Crossbeam (W-axis) Rapid traverse 410 mm/min Table drive: -Oil transmission, Type Iv4 -Cylinder-Ø 185 mm -Piston rod Ø 130 mm -Drive motor 22 kW

Condition: used, x-travel 500 mm y-travel 400 mm z-travel 400 mm Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale, and error in technical data : DECKEL MAHO CNC Universal Milling Machine model DMU 50 M year 1998 Working range: Longitudinal stroke X Axis 500 mm Vertical stroke Z Axis 400 mm Cross stroke Y Axis 400 mm C-axis – table turning, manual 360 ° B-axis – table swivelling, manual ° Table area Ø 700 x 500 mm Inclination range of table (manually) + / - ° Rotation of table (manually) 360 ° Max. Table load approx. 200 kg Maximum distance table – spindle nose 550 mm horizontal distance machine – spindle nose 2 – 6 mm Tool holder Taper ISO 40 Spindle speeds 20 – 4,500 rpm Feed rate max. 5.000 mm/min AC main drive, 0% / 40% power-on time approx. 9 / 13 kW Total electrical load, approx. 15 kW - 400 V - 50 Hz Weight, approx. 3,000 kg Pjdjv Td Elepfx Am Tsgp Accessories / Special Features • 3 Axis HEIDENHAIN Point to Point Control Model TNC 124 with Monitor, direct programming and input of data and electronic handwheels. • All 3 axis are operated by the milling head, the table is stationary so also out of proportion workpieces can be machined. • Rotary Table can be manually rotated 360° and manually inclined + / -° (each with clamping). The digital read-out of the angles is integrated in the CNC control • Simple coolant unit with pump and tank, built-on switch cabinet (SIEMENS parts) • Pneumatic tool claomping, Some tool holders available, manuals, CE-Certificate, etc. Condition : very good condition ! Ideal for training center or single parts machining ! Please click here to view a video of the machine running : ! Delivery : immediately available, FCA Metzingen Payment : 0 % Net, after conclusion of contract, before loading We always have a large selection of milling machines - CNC or conventional - available. Please let us know your requirements.

Condition: used, travel distance X-axis: 7,000 mm, travel distance Y-axis: 4,000 mm, travel distance Z-axis: 900 mm, spindle speed (max.): 1,200 rpm, feed rate X-axis: 900 m/min, Ø quill: mm. 140 Spindle taper : ISO 50 travel X : mm. 7000 travel Y: mm. 4000 Cross travel Z RAM: mm. 900 Quill travel W: mm. 900 Rotary table: mm. 1800x1800 load admitted on table: Ton. 10 Table rotation: °.pos. Psdst Rkcuspfx Am Tsgp Table long.travel (AxisV): mm. 1500 Spindle speed : RPM. 1200 Spindle motor: Kw. 70 CNC ECS 2101 N°2 milling square heads N.2 Floor plate 6000x2000

Condition: used, Year of construction: 2005, - Fagor 8055 CNC control - Additional tank for internal spindle cooling (15 bar) 400 liters - Year of construction 2005 Technical data: - Travel X/Y/Z: 610 / 455 / 520 mm - Rapid traverse: 24 m/min - Working spindle speed: 8000 rpm - Tool holder: BT40 - Table size: 762 x 363 mm Pgodpfx Amjtvf Htj Tep - Maximum table load: 350 kg - Motor power: 18 kW - Operating voltage: 400 V - Weight: 3140 kg

Year of construction: 1980, condition: good (used), A used, very well-maintained cycle-controlled lathe from Weisser Heilbronn with a SIEMENS control system. Distance between centers 2000 mm Center height 295 mm Swinging diameter over bed 600 mm Swinging diameter over cross slide 260 mm Swinging diameter in the crotch 800 mm Total length of the crotch 375 mm Bed width 450 mm Travel of X-axis 350 mm Travel of Z-axis 1850 mm Spindle nose DIN 55022, size 8 Spindle speed, number 18, 14 – 1400 rpm Spindle bore 71.5 mm Diameter of front bearing 110 mm Feed range 0.01 – 40.95 mm/rev Rapid traverse 8 m/min DC drive 15 kW 400V 50Hz Max. permissible torque on the spindle 2500 Nm Psdjgyy I Aspfx Am Tjgp Tailstock quill 80 mm Quill stroke 250 mm Internal taper in quill MK 5 Length x width x height Machine weight 5500 kg Accessories: Tailstock Pneumatic three-jaw chuck with replaceable jaws, 315 mm Quick-change tool holder "MULTIFIX" in front of the center, size "C" Four-position turret behind the center Tool holder Coolant system Follow rest, pneumatically actuated Technical data and dimensions: Subject to change without notice. Video conference via WhatsApp possible after scheduling an appointment.

Condition: excellent (used), workpiece diameter 10 - 250 mm threading length 900 mm thread pitch 0,3 - 100 mm spindle turning speed range 72 / 1700 - 2540 U/min relief of the tap 0,03 - 8 mm clamping length max. 1190 mm max. module 10 workpiece turning speeds 0,4 - 160 U/min total power requirement 13 kW weight of the machine ca. 7,4 t Pjdoyb S Rispfx Am Tjgp dimensions of the machine ca. 4,5 x 2,0 x 2,1 m Many accessories.

Condition: used, table length 400 mm table width 300 mm x-travel 300 mm y-travel 250 mm z-travel 250 mm Podpfxjvwgq Sj Am Tjgp weight of the machine ca. 1,2 t dimensions of the machine ca. 2000 x 1200 x 2500 mm The machine is supplied with a wide range of accessories

Condition: used, Year of construction: 2000, grinding diameter 360 mm grinding length 1600 mm centre height 180 mm internal diameter 0 mm grinding depth 0 mm swing diameter 0 mm total power requirement 40 kW weight of the machine ca. 10000 kg dimensions of the machine ca. m K A R S T E N S (Germany) Universal “CNC” - Cylindrical Internal and Face Grinding Machine also for grinding excentric and cam profiles and polygons and even suitable for Threadgrinding Model K 51 – 1500 Year 2000 Serial No. 99 093 Height of centres 180 mm Distance between centres / grinding length 1,700/1.600 mm Cylindrical Grinding: Grinding Ø, approx. 5 - 360 mm Grinding wheel: Ø x width x bore 500 x 100 x 127 mm Grinding spindle speeds (35 m/s / 50 m/s) 1.900 / 2.200 rpm Drives of cyl./int/face spindle units 7.5/4,0/7,5 kW Grinding Wheelhead: 3 Positions = B-Axis Head swivels in 3 positions = 240 ° / 17,5 degree X-axis adjustment in total 360 mm Increments for infeed 0,001 – 125 mm Workpiece wheelhead = C-Axis Spindle speeds steplessly adjustable 10 – 1.000 rpm Spindle taper / Spindle bore MK 4 / 24 mm Table speeds 0,01 – 10.000 mm/min Total electrical load 40 kW - 400 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features: * Very versatile CNC Grinding Machine for almost all grinding purposes like External/Internal and Face grinding as well as for Excentric- / Cam- / Polygone Grinding and even for Thread Grinding * Free programmable CNC System make BWO Model 900 C with many grinding cycles Podpfxot Hw Rde Am Tsgp and for easy input of the work-parameters. Graphic support, any many more features. * 3 position wheelhead with 3 Grinding spindles as B-Axis, one with measuring feeler (Z - Position) * MOVOMATIC Measuring Device Model ES 400 for diameter control, Probe head CR 60, to be mounted on table. * MPM Automatic Grinding wheel balancing Device, Dressing devices with diamantflees mounted on table surface and also motorized Diamantroll Profile dresser on table (for thread profiles, etc.) * Workhead and tailstock can be easily moved on table by air cushion. Hydraulic quill on tailstock. * No Coolant Device available ! Condition : Good to very good. Machine can be inspected under power. Delivery : Ex stock as inspected. Payment : Net, after conclusion of contract.