Band saw machine

FORTE BA 251

Condition: used, Year of construction: 1970, cutting diameter 250 mm saw band length 3660 mm cutting width 1,3 mm clamping range Länge 450 mm Rsdexc Nwuepfx Abgew clamping range Höhe 250 mm cutting speed 20 - 70 m/min cutting capacity stufenlos mitter cutting - all-position 45 ° voltage 380 V frequency 50 Hz power capacity 0,55 kW weight of the machine ca. 0,7 t dimensions of the machine ca. 1,5 x 1,0 x 1,6 m coolant device

Condition: good (used), Year of construction: 2003, Horizontal bandsaw fully automatic with gripper feed Cutting capacity 90° round: 400 mm square: 400 x 400 mm Cutting speed: 15 - 90 m/min Working height: 800 mm Saw blade dimensions: 4570 x 41 x 1.3 mm Material feed per stroke: 560 mm Multiple feed: up to 9 times = 5040 mm Motor power: 5.5 kW Dimensions (L x W x H): 2250 x 2850 x 1700 mm Weight: 2500 kg Accessories / Special features: • Fully hydraulic: workpiece clamping, saw feed, bow lifting, and material feed • Gripper feed system • Screw conveyor swarf remover • Fully automatic operation or single cuts Redpfx Abjynaz Nogsw • Automatic bow lifting height adjustment according to material diameter • Max. cut length: 560 mm with single feed • 5040 mm with multiple feed • Hydraulic clamping pressure regulation for the vise • Saw band guidance via deflection rollers and carbide jaws • Constant saw band tension with automatic shutdown in case of blade breakage • Coolant system • Piece counter • Emergency stop switch • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Year of construction: 1986, condition: good (used), machine/vehicle number: 120 603, cutting area round: 250 mm cutting area square: 250 mm sawing band measures: 3660 x 25 x 0,9 mm band speed: 20 - 70 m/min sawing drive: 1 kW space needed: 1900 x 1450 x 1250 mm Rodpfx Ajf S Ilyobgow weight: ca. 850 kg

Condition: used, Technical details: spindle taper: SK40 spindle stroke: 175 mm number of spindles: 8 Stück number of stations: 5 Stück cycle time: 15-20 sec revolutions per minute: bohren/drill/taladrar 225...1037 U/min. revolutions per minute: gewinde/threading/roscar 50...316 U/min. feed: 0,2 m/min total power requirement: 30 (40PS) kW weight of the machine ca.: 9,0 t space requirements of the machine approx.: 3,9x2,4x2,5 m dimensions of machine: L:3,9xB:2,2xH:2,7 m dimensions L x W x H: +Anlage/plant/planta 2,7x2,52x2,25 m Redpeu Idycsfx Abgsw The machine will be on a General overhaul (pictures from original condition at the former Company) The machine has been constructed for the metal cutting process of workpieces in one clamping session. Especially blanks made of brass with a diameter 90mm x approx 100mm length would be machined with this machine. description: - workpiece support with switch plate with clamping station type round table with horizontal axis with 5 workpiece stations processing units: - drill spindle and thread cutting units - drill capacity up to 2 3/4" and 81,53mm in brass - thread cutting up to 2 1/2" und metric thread Machine is equipped with a feeding-and unloading unit for workpieces. ( feed capacity 3 -4 pieces/min and cycle time 15 - 20 sec.) furthermore incl. coolant device i.D. *

Condition: used, Year of construction: 2008, Technical data: Design: Swivel frame design Mitre range: 60° left to 60° right Drive: 3 kW, 400 V / 50 Hz Saw band speed: continuously variable, 20–120 m/min Saw band dimensions: 4,780 × 34 × 1.1 mm Material support height: 750–760 mm Minimum remaining piece length: 30 mm Hydraulic full-stroke clamping system Hydraulic saw feed Automatic cutting pressure control Carbide saw band guides Rsdpfx Aozcdkkjbgsw Freely positionable control panel Weight: approx. 948 kg Machine dimensions (L × W × H): 2,355 × 810 × 1,410 mm Cutting range: 0° * Round: Ø 340 mm * Rectangle (horizontal): 510 × 220 mm * Rectangle (vertical): 510 × 220 mm * Square: 340 × 340 mm * 45° Right * Round: Ø 330 mm * Rectangle (horizontal): 360 × 120 mm * Rectangle (vertical): 300 × 340 mm * Square: 310 × 310 mm * 60° Right * Round: Ø 270 mm * Rectangle (horizontal): 230 × 160 mm * Rectangle (vertical): 200 × 340 mm * Square: 220 × 220 mm * 45° Left * Round: Ø 330 mm * Rectangle (horizontal): 370 × 130 mm * Rectangle (vertical): 310 × 340 mm * Square: 310 × 310 mm * 60° Left * Round: Ø 270 mm * Rectangle (horizontal): 240 × 160 mm * Rectangle (vertical): 210 × 340 mm * Square: 230 × 230 mm

Condition: used, Technical details: number of spindles: 11 Stück number of stations: 11 Stück taper: SK 40 Rjdpou Idw Iefx Abgow air pressure - required: 6 - 7 bar total power requirement: 13 kW weight of the machine ca.: 10,2 t space requirements of the machine approx.: 4,0 x 4,0 x 3,4 m dimensions of machine: 3,4 x 3,45 x 2,9 m dimensions electric cabinet: 2,1 x 0,4 x 1,9 mm Transfermachine (drilling & cutting) Accesssories optional please enquire to this additional position! - workpiece holding turret Ø 1000mm with tool holder for 8 tool clamping stations, self centering clamping chuck jaws between the jaws, max. 20mm chuck jaw stroke ( oil pneumatic circulation) - 11 working stations with Sk40 intake (right 4x Drill-& Mill spindle and 1x mitU-axis , left 4x Drill-& Mill spindle ) - drill unit 8x spindle stroke 125mm, feed 0 - 2 m/min, 164 - 1005 rpm with 12 gears stages - thread cutting unit working stroke 125mm, rotation direction clockwise and counter clockwise, 31,5 - 194 rpm with 12 gears stages - opposite located drill units 8 pieces with SK 40 holder - coolant device with supply - control via switch panel - with swarf basin L: 1200 x W: 740 x H: 220mm i.D. *

Condition: good (used), Year of construction: 1992, At site. Year of manufacture: 1982 to 1992. TYPES: SF 32 DNT, AF 32, AF 26, AF 26 DNT, AF 32, SF 32, SF 51. Rodpsyplpnjfx Abgew

Condition: used, Friction press, flywheel press, forging press, screw press, used machine Rodpfexpf U Asx Abgew Manufacturer: ASJ Type: J53-160B Overall dimensions: Width: 1850 mm Depth: 1380 mm Height: 3140 mm Weight: 8190 kg Table size: 560 × 510 mm Clear opening without table: 560 × 560 mm Clear opening with table: 260 mm Nominal pressure: 160 tons Stroke length: 360 mm

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, turning length: 63 mm, rotational speed (max.): 3,750 rpm, overall weight: 6,800 kg, drilling depth: 63 mm, The machine comes complete with collets, holders, and other accessories! Rjdpfxjytf Eko Abgjw TECHNICAL DETAILS Max. turning length: 63 mm Max. drilling depth: 63 mm Max. workpiece passage: 26 mm Max. workpiece feed: 125 mm Spindle speed range turning: 236 - 3,750 rpm Spindle speed range thread cutting: 13 - 1,875 rpm MACHINE DETAILS Required floor space: 7.16 x 2.3 m Height: 2 m Weight: 6,800 kg EQUIPMENT 6 cross slides 6 longitudinal slides 6 cams for cross slides 6 cams for longitudinal slides 4 change gears for main and feed drive Service tools