Folding machine

G. F. LOTTER -

Condition: used, 125kV incl. switch cabinet for small wind turbine Pos 1 Switchboard switchgear F&G GA 2K 1TS YEAR 12/1997 Distribution board uesa 1250 NSL-2K/W-5 year 1998 Iieletv Eumjhcdw Njb Pos 2 Switchboard switchgear F&G GA 2K 1TS YEAR 12/1997 Distributor uesa 1250 NSL-2K/W-5 year 1998 Pos 3 Switchboard switchgear F&G GA 1TS 1A2 YEAR 12/1997 Distributor uesa 1250 NSL-2K/W-5 year 1998

Condition: new, Bee GTE-88/090/-08-V17-F pneumatic ball valve, 24V DC coil voltage, unused, 100% functional, scope of delivery as per photos Ielhcdsi D T Iysw Neib

Year of construction: 1993, Condition: used, Working 4 belt sander Iisljv D Rvfohcdw Njb Bjr 1993

Condition: excellent (used), Year of construction: 2018, grinding width: 400 mm, working width: 400 mm, grinding belt width: 455 mm, grinding belt length: 1,900 mm, total length: 3,350 mm, overall weight: 4,800 kg, Strip sanding machine / parquet sanding machine Manufacturer: VG Machines Type F/G 455 2 KS / 2KS Iielhcdjv Tnatjw Nob Year of manufacture: 2018 Machine originates from a parquet manufacturer Line design / road machine (movable upper section) for calibrating and sanding from below and above in one pass Working width: approx. 400 mm Equipped with: 1x calibrating roller from above, approx. 11 kW 1x sanding pad from above, 5.5 kW 1x calibrating roller from below, approx. 7.5 kW 1x sanding pad from below, 5.5 kW Sanding belt dimensions: 455 x 1900 mm Infinitely variable feed rate, max. 16 m/min., motor approx. 2.2 kW Voltage: 400 V Total connected load: approx. 34 kW Dimensions: approx. 3350 x 1900 x 2000 mm Weight: approx. 4800 kg

Condition: used, Electric chain hoist, electric hoist ELEPHANT / FBH (Japan) Type F(S)2-A(B4-B6)M(P-G) Serial no. 03278 Year of manufacture 1997 Load capacity: 2000 kg Hook path 2.6 meters Lifting speed 3.8 m/min. Fine lifting speed 1 m/min. Chain size 7.1 x 21 / grade 8 Cable length of operating block approx. 2.5 meters Mains connection 400 Volt, 50 Hz. Iijlhcjvcdv Aodw Nsb 2 load lines = 2000 kg - Emergency stop Own weight 70 kg Good condition

Condition: good (used), Gear motor, electric motor, electric gear motor, spur gear motor -Manufacturer: KEB, spur gear motor type G 2.2A DK 80 G 4 F -Speed: 84 rpm -Power: 0.75 kW -Shaft: Ø 25 x 50 mm -Protection class: IP55 Iiolhcjt Rl T Iodw Nob -Dimensions: 480/180/H175mm -Weight: 21.8 kg

Condition: used, Year of construction: 2015, machine/vehicle number: 917, 5-Axis CNC Gantry Milling Machine HG GRIMME SysTech GmbH G-DT-F 12/10 SB Machine Data Year of Manufacture: 2015 Serial Number: 917 Operating Hours: 12,613 h External Dimensions: 6,382 x 3,568 x 3,180 mm (L x W x H) Workpiece Material: Plastic Workpiece Size: Max. 1,200 x 1,000 x 400 mm (L x W x H) Travel Paths: X = 1,800 mm, Y = 1,600 mm, Z = 815 mm, C = +365°/-95°, A = +/-181° Electrical Data Voltage: 230/400 V Power: 24.5 kW Frequency: 50 Hz Milling spindle Manufacturer: Jäger Type: Z80-K530.04 Tool holder: WK25 Power: 4.6 kW Speed: max. 30,000 Balancing: Quality level Q < 0.4 Control system Manufacturer: SIEMENS Type: SINUMERIK 840D sl Operator panel: OP 10 C Iioljwfid Nohcdw Nob Note: This is a starting price. The sale will be made via an online auction to the highest bidder (plus premium and VAT). Please follow the link for further information and photos of this lot.

Condition: new, Year of construction: 2025, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 80 m/min, rapid traverse Z-axis: 60 m/min, workpiece length (max.): 2,500 mm, workpiece width (max.): 1,300 mm, workpiece height (max.): 800 mm, spindle speed (min.): 36,000 rpm, spindle speed (max.): 12,000 rpm, CNC Machines from HG GRIMME SysTech - CNC 5-Axis Milling Machine G-S-F/Universal Perfect for: Applications in model and mold making, but also for milling other materials – a universal powerhouse with a rapid traverse of 80 m/min Materials: Plastics, composite materials such as CFRP/GFRP, model making materials, aluminum Industries: Automotive, aviation, transport & logistics, leisure industry, plumbing, boat building, automation Reference number: 1208 Availability: July 2025 CNC Machine Type: 5-Axis CNC Milling Machine G-S-F/B (25-13) Spindle specifications: 8 kW / 6.4 Nm; 12,000-36,000 rpm; HSK E 40 Iolhcdwjwdt Ipo Neib Rapid traverse X/Y/Z: 80/80/60 Component dimensions X/Y/Z: 2500 x 1300 x 600 Control: SIEMENS – Sinumerik 840D sl with HT 8 Tool changer: 13 tools Tables: 1 table Vacuum system: yes Tool breakage and length control: Renishaw-TS 27 R Other: upon request Year of manufacture: 2025 Condition: new

Condition: new, Grundfos CRN32-5-2 A-F-G-E-HQQE Vertical centrifugal pump CRN 32-5-2 A-F-A-E-HQQE Vertical, multistage centrifugal pump with opposing suction and discharge connections (inline design). The pump components in contact with the medium are made of high-quality stainless steel. The cartridge seal promises high reliability and ease of servicing. Power is transmitted via a rigid, split coupling. The pipe connection is made via combined DIN flanges. The pump is equipped with a 3-phase, fan-cooled asynchronous motor. Manufacturer: Grundfos Manufacturer Product Group: Vertical Centrifugal Pumps Manufacturer Product Group: Vertical Centrifugal Pumps CRN Centrifugal pump CRN Manufacturer article number: 96122358 Connection inlet side: Flange Connection outlet side: Flange Connection standard inlet side: EN 1092-2 Nominal diameter, connection outlet side: DN 65 Design: Vertical Speed: 2924 min Motor output power: 11.0 kW Protection class: IP55 Max delivery head: 90.2 m Max working pressure: 16 bar Weight: 193.2 kg Iiolhcdwswbfigo Njb List price: 14,844.00 € You can find more items in other sizes - new and used - in our store! International shipping costs on request!

Condition: new, overall weight: 35,000 kg, empty load weight: 6,400 kg, maximum load weight: 28,600 kg, axle configuration: 3 axles, loading space length: 10,500 mm, loading space width: 2,440 mm, loading space height: 2,000 mm, loading space volume: 51 m³, next inspection (TÜV): 06/2023, suspension: air-lift, color: grey, tire size: 385/65R22,5, gearing type: other, total length: 2,500 mm, total width: 3,650 mm, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, aluminum body, 3-axle, BPW axles, air suspension, 1st axle liftable, ABS (anti-lock braking system), roller tarpaulin, catwalk, grain outlet, supports Body: Aluminum box body manufacturer Fudickar approx. 51.8m³ low pressure cylinder 190Bar, floor 7mm, side walls 30mm hollow chamber profile with 2.7mm inner wall thickness, front wall straight 4mm, rear wall as combination door (1/3, 2/3) with double bearing and steel frame incl. grain slider 400x400mm, replaceable rubber seal, saddle height 1,180-1,210mm, construction of the trailer like Langendorf! New vehicle from stock with daily registration on 08.06.2022! ACCESSORIES WITHOUT WARRANTY, subject to changes, prior sale and errors excepted! Ielhcdwjvhhvqs Njib - .

Condition: used, Year of construction: 2014, Functionality: fully functional, The Brouillon 550L-F-G kettle is designed to meet the needs of food industry professionals. Thanks to its gas heating system, it ensures even, precise cooking. What's more, its flexibility is ideal for managing different temperatures, making it a versatile tool for a wide range of recipes. In fact, this kettle can be used to prepare large volumes without compromising quality. What's more, its regulation system offers precise temperature control, guaranteeing optimal results with every use. What's more, its 550-liter capacity is perfect for companies looking to increase production while ensuring consistent quality. With its robust construction, the Brouillon 550L-F-G offers durability and reliability. As a result, it's easy to maintain, reducing maintenance costs and production downtime. In short, this kettle is an essential asset for professionals seeking to optimize their cooking processes while maintaining high quality standards. Technical specifications: Gas kettle Max. temperature: 165 °C Iolhceu Iaarjdw Njib Min. temperature: 10 °C Year: 2014 Volume : 550 L Heating capacity : 120 kW

Condition: new, Year of construction: 2025, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 80 m/min, rapid traverse Z-axis: 60 m/min, controller model: Simens Sinumerik 840 D SL mit Handterminal HT 2, workpiece length (max.): 3,500 mm, workpiece width (max.): 1,500 mm, workpiece height (max.): 700 mm, spindle speed (min.): 12,000 rpm, spindle speed (max.): 24,000 rpm, CNC machines from HG GRIMME SysTech - CNC 5-axis milling machine G-S-F/Universal Perfect for: Applications in model and mold making, but also for milling other materials – a universal powerhouse with a rapid traverse of 80 m/min Materials: Plastics, composite materials such as CFRP/GFRP, model making materials, aluminum Industry: Automotive, aviation, transport & logistics, leisure industry, plumbing, boat building, automation Reference number: 1210 Availability from: July 2025 CNC machine type: 5-axis CNC milling machine G-S-F/UNI (35-15) Spindle specifications: 13 kW / 10.3 Nm; 12,000-24,000 rpm; HSK F 63 Rapid traverse X/Y/Z: 80/80/60 Component dimensions X/Y/Z: 3500 x 1500 x 700 Control: SIEMENS – Sinumerik One with HT 2 handheld terminal Tool changer: 10 tools Tables: 1 table Ielhcdswdt Ezjw Neib Vacuum system: yes Tool breakage and length control: Renishaw-TS 27 R Other: upon request Year of manufacture: 2025 Condition: new

Condition: new, overall weight: 14,000 kg, empty load weight: 3,100 kg, maximum load weight: 10,900 kg, axle configuration: 2 axles, loading space length: 3,400 mm, loading space width: 1,630 mm, loading space height: 813 mm, suspension: air, tire size: 285/70R19.5, color: silver, Year of construction: 2021, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: in transit, 2 axles, BPW axles, tandem, air-sprung, lifting + lowering, ABS (anti-lock braking system), lashing eyes, front support, rear support, drawbar height adjustable Ielhei Rrvvjcdw Noib Construction: for demountable containers, drum brakes, hot-dip galvanized, load securing, BPW axles type KMBMH 7008! 10.9t payload, pre-installation for attachable ramps for transporting construction machinery. The loading area of our pre-run trailers can be extended on request and for an additional charge! German production! ACCESSORIES INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! - .

Condition: new, Year of construction: 2025, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 80 m/min, rapid traverse Z-axis: 60 m/min, controller model: Simens Sinumerik 840 D SL mit Handterminal HT 2, workpiece length (max.): 3,500 mm, workpiece width (max.): 1,500 mm, workpiece height (max.): 700 mm, spindle speed (min.): 12,000 rpm, spindle speed (max.): 24,000 rpm, CNC machines from HG GRIMME SysTech - CNC 5-axis milling machine G-S-F/Universal Perfect for: Applications in model and mold making but also for milling other materials - universal powerhouse with a rapid traverse speed of 80 m/min Materials: Plastics, composite materials such as CFRP / GFRP, model making materials, aluminum Industries: Automotive, aviation, transportation & logistics, leisure industry, sanitary, boat building, automation _____ Reference number: 1204 Availability: April 2025 Model: 5-axis CNC milling machine G-S-F/Uni Spindle data: 13 kW / 10.3 Nm; 12000-24000 1/min; HSK F 63 Rapid traverse X/Y/Z: 80/80/60 Component dimensions: 3500 x 1500 x 700 Control: Siemens Sinumerik 840 D SL with manual terminal HT 2 Tool changer: 10 tools Iislhsvcax Tscdw Nsb Tables: 1 table Vacuum system: yes Tool breakage and length control: Renishaw-TS 27 R Other: pneumatic sliding door Year of construction: 2025 Condition: new

Condition: new, overall weight: 35,000 kg, empty load weight: 6,900 kg, maximum load weight: 28,100 kg, axle configuration: 3 axles, loading space length: 11,000 mm, loading space width: 2,420 mm, loading space height: 2,000 mm, loading space volume: 53 m³, suspension: air, color: silver, tire size: 385 / 65 R 22,5, Year of construction: 2009, gearing type: other, total length: 2,550 mm, total width: 3,900 mm, driver cabin: other, Vehicle location: in feed / in transit, aluminum body, 3-axle, SAF axles, grain outlet, portal doors Body: Body approx. 53.2m³, ARCHIVE PHOTO! Drum brakes, The vehicle is still under construction and will be completed! Location: Hoym ( FAG ) ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Iijlhjvhg Hbocdw Neb - .

Condition: good (used), The scope of delivery includes: 1x Bracket for rear wall grille, used Material color: Sendzimir galvanized Total length: approx. 165 mm Total width: approx. 78 mm Total depth: approx. 40 mm Grid spacing: approx. 50 mm Drill hole diameter: approx. 10 mm Material thickness: approx. 2.50 mm Weight per piece: 0.270 kg Your contact person: Mr. Andre Evening Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item is subject to additional costs, which can be requested separately from us depending on the delivery location and scope of delivery. Iislhcdewkgk Row Nob

Condition: used, Stainless steel hoppers (original Arburg) for Arburg machines in various sizes with clamping piece and bar (not available for all) lightly used hoppers (almost as new) available in these sizes: hoppers capacity 50 liters (corresponds to Arburg part number: 103307) - 7 pieces Ielhcdweuhit Se Neib price per piece EURO 200,00 hoppers capacity 100 Liter - 3 pieces price per piece: EURO 250,00

Year of construction: 1980, Condition: used, Tank trailer - semi-trailer with bright beer tank for beer transport; the construction year of the trailer is 2012. Volume: 25250 Liter Operating pressure: 3 bar Systemic volume: 25250 Liter Iislhcsvcqlkodw Neb

Condition: good (used), Machine type:Screw compactors Manufacturer:H&G Model:HG/SV 11 Year of manufacture:2007 Condition:good (used) Drive power 11 kW Diameter worm flange 600 mm Dimensions filling opening without hopper 1200 x 1400 mm Weight: 1800kg Iielhcsiqt Nrodw Neb

Condition: good (used), TMZ F-102 76x106cm die cutting machine The machine is fully operational, ready to work. Made in Spain. Format 760x1060mm Weight 3600kg Iolhewha Dlocdw Neib Power supply 380V Installed power 4.5 kW Equipment: – pneumatic clutch – control panel – mounting frame – 3 operating modes: continuous, with time delay, manual – central lubrication – safety guards – operating tools – sheet metal for pressure

Condition: excellent (used), Year of construction: 2003, Functionality: fully functional, machine/vehicle number: 420/1007, power: 43 kW (58.46 HP), K+G Wetter 120 Liter Bowl Cutter Iislhcdwswit Efs Njb Year of manufacture: 2003 with ejector surface, bowl lid with baffle and stainless steel bowl, noise-proof lid, membrane keypad, infinitely adjustable blade shaft speed (40-4,400 rpm) infinitely adjustable bowl speeds (5-18 rpm) infinitely adjustable reverse mixing speed (40-500 rpm) digital display for blade shaft, temperature, and bowl Accessories: 3-blade cutter head, spare blades, wrench, operating instructions, and spare parts list

Condition: used, Year of construction: 1978, Functionality: fully functional, machine/vehicle number: 150 359 - 11683, For sale are the PS160 (2 units) and the PS140 (1 unit). One is 250 metric tons, the other is 140 metric tons. The PS160 is one of the complete machines and is in operation; the PS160 does not have the control cabinet. The machines are for sale as a single unit and individually. Ijlet Ucpbehcdw Noib Inquire by phone or email!

Condition: repair required (used), Year of construction: 2004, Functionality: not functional, We are offering the following machine for sale: Damaged precision surface grinder - Manufacturer: Präzisions Maschinen Nürnberg GmbH - Type: MPS2-R220 Iijlhcdwswhc Hvj Neb - Year of manufacture: 2004 - Weight: 320 kg - Storage: Bolted to a transport base with four bolts Damage from falling or tipping: - Spindle head warped - Spindle drive housing missing - Handwheel broken off - Column shifted on stand - Housing deformed - Oil leak - No longer functional - See photos Sold as seen, without warranty or guarantee, no exchange. Sales basis: ex warehouse in Erlangen

Condition: good (used), Year of construction: 2006, G. Mondini with 2 heads. Type VF/SPE-2. Year of manufacture - 2006 Iijlhcdstp I Rnsw Njb Piston dimensions - Diameter - 80mm. Length - 230mm. Volume approx 1000ml, completely stainless steel. click on photos for more photos.

Condition: excellent (used), Year of construction: 2002, operating hours: 146,161 h, Functionality: fully functional, operating hours of spindle: 4,486 h, First commissioned: 2002 Control: Fidia C20 with HPX control panel X-axis: approx. 3,000 mm Y-axis: approx. 2,360 mm Z-axis: approx. 1,500 mm A-axis: ± 105° C-axis: ± 300° Clamping table Clamping area: approx. 5,000 x 2,000 x 400 mm T-slot spacing: 18H12 / 250 mm Table load: 15,000 kg/m² 2-axis milling head AC3 (2003) Spindle power: 28 kW Spindle speed: max. 18,000 rpm Torque: 90 Nm Tool holder: HSK 63A Tool clamping: hydraulic Minimum quantity lubrication: External Iiolhcdwjwdv N Aj Njb Linear axis drives X-, Y-axis feed rate: up to 20 m/min Z-axis feed rate: up to 20 m/min X-, Y-, Z-axis acceleration: up to 1.5 m/s2 Connection data Connected load: 40 kW Back-up fuse: approx. 80 A Dimensions, weights Space requirement (machine with peripherals): approx. 7,300 x 5,600 x 5,600 mm Total weight: approx. 16,500 kg Color Housing, gantry, control cabinet: light gray Milling head and applications: turquoise Additional equipment - 18-position chain tool changer - 3-sided housing, without extraction ducts Optional for an additional charge: - Wired measuring probe Machine condition Fully functional, in very good condition. Available from 01.05.25 and still powered until the end of June 2025.