Centerless grinder cnc

GHIRINGHELLI M100

Condition: used, Year of construction: 1995, Centerless Cylindrical Grinding Machine Ghiringhelli M100SP400 Workpiece diameter: 1–50 mm Maximum plunge grinding length: 100 mm Grinding wheel diameter max.: 406 mm Iajdpfx Asxz R U Eoddjl Grinding wheel diameter min.: 260 mm Grinding wheel width: 80 mm Grinding wheel speed (new): 2,140 rpm Grinding wheel speed (worn): 2,579 rpm Peripheral speed: 45 m/s Drive wheel indexability: ±6° Drive wheel diameter max.: 200 mm Drive wheel diameter min.: 80 mm Drive wheel speed: 0–140 rpm Dressing speed: 200 rpm CNC control: Siemens 810 GA3 Machine width: 3,100 mm Machine depth: 2,700 mm Machine height: 2,000 mm Total weight: 2,500 kg Total power: 12 kVA Supply: 380 V/50 Hz Hydraulic pressure: 2–3 MPa Pneumatic pressure: 0.5 MPa No guarantee is given for the correctness, completeness, or accuracy of the information provided.

Condition: good (used), Year of construction: 2006, operating hours: 119,571 h, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 45,000 m/min, rapid traverse Y-axis: 45,000 m/min, rapid traverse Z-axis: 45,000 m/min, controller model: Siemens 840 D, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Hermle C30 U Siemens 840D Machine ON: 119,571 h, Spindle ON: 56,792 h Ijdpfx Aexcp Sreddeal - Spindle HSK-A63 10,000 rpm - 32 tool stations - Rotary table SRT 280 mm with integrated clamping system HSK100 (if not needed, it can be covered or alternatively converted to a zero-point clamping system) - External coolant supply - Internal coolant supply with 80 bar paper band filter - Chip flushing gun - Chip conveyor - Handheld control module - Automatic cabin door - 32 tool stations plus 87 additional stations ZM87 - Thermal compensation - BLUM tool measurement on the side - Renishaw probe - Chip container - Status light The machine has been thoroughly inspected and comes with a geometry report as well as circularity test measurements. The machine can be viewed and tested under power at any time. Very well-maintained condition.

Condition: refurbished (used), Centerless grinding machine - centerless Ghiringhelli M100 CNC 1A 400x100mm wheel CN 1 axis plunge + through feed grinding The machine can be seen working in our warehouse in Gussago BS. Mimu(dot)com machine tools Centreless grinding is a procedure for grinding cylindrical bodies and is used for mass production of rollers cylindrical, conical rollers, jet needles, pump pistons, hydraulic sliders, crosses, drills etc. During centerless plunge grinding, the workpiece is ground in one pass thanks to the translation of the grinding wheel. For this purpose, the grinding wheels and the adjustment discs have a negative profile of the piece to work which is given to them with the aid of a tool. The through-feed grinding or also through grinding and longitudinal grinding: pieces to be worked proceed uninterruptedly with axial feed through the rectification gap. Wheel width: 100 Iaodpfxjh D It Nj Addol Wheel diameter: 400

Condition: used, TECHNICAL DETAILS - Workpiece diameter : 0.5 - 40 [mm] - Max. plunge grinding length : 95 [mm] WORKING GRINDING WHEEL - Grinding wheel width : 100 [mm] - Peripheral speed : 35 [m/s] - Grinding wheel speed : 2228 [rpm] - Minimum wheel diameter : 260 [mm] - Maximum wheel diameter : 406 [mm] REGULATING WHEEL - Grinding wheel width : 100 [mm] Iajdpsuhb Rcefx Addol - Wheel tilt : +/- 6 [°] - Min. diameter of drive wheel : 150 [mm] - Max. diameter of drive wheel : 205 [mm] SUPPLY - Installed power : 20 [kW] - Supply : 400V, 50 [Hz] DIMENSIONS - Floor dimensions : 4090 x 1640 [mm] - Machine height : 2.100 [mm] - Machine weight : 2.700 [kg] EQUIPMENT - CNC : SIEMENS SINUMERIK 840 D

Condition: good (used), Manufacturer ESTARTA Model 301 MV Condition Used Stock number 4576 Location Badajoz, Spain Dimensions 1520x1020x1260mm Weight 1550 kg Opening between grinding wheels 1,5/50mm Max. grinding wheel width in plunge grinding plunge 125mm Dimensions of the working wheel (od x id x width) 300x125x175mm Øext.min. working wheel working wheel 220mm Max. depth of profile of working profile depth 8mm Dimensions of the driving wheel (od x id x width) 220x125x125mm Øext.min. of driving wheel drive wheel 165mm Max. depth of Ijdpfor Ezfpex Addsal profile of the driving wheel profile depth 8mm Grinding wheel motor power motor power 7,5Kw Motor power of grinding wheel driving motor power 0.75Kw Tilting angle angle of working working +/- 5º

Condition: used, Year of construction: 2021, control Heidenhain TNC 640 Isdjx A H Scopfx Addoal travel -x axis 3.500 mm travel -y axis 1.200 mm travel -z axis 1.500 mm turning speeds 4.000 U/min Maximum power 37 kW max. torque 644 Nm indexing 2,5 ° working area 3.700 x 1.000 mm max. table load 9.000 kg diameter of tools max. 125 (250) mm tool length - max. 400 mm General: - Gear spindle: SK 50 Milling head (spindle): - Technology: Diagonal head with gear spindle Tool magazine: - Technology: Chain magazine - Tool changer: Double gripper - Number of stations: 40 Equipment/accessories: - Position measuring systems: Direct in all axes - Chip disposal: Chip conveyor - Coolant supply: IKZ system, 20 bar - Workpiece measurement: Renishaw measuring probe - Setup mode: Electronic handwheel - Software option: Adaptive Control

Year of construction: 2012, condition: good (used), Muratec MW120 GT for sale Used, in excellent condition. Iaodjifi D Tepfx Addjl The machine can be viewed by appointment. Delivery is the customer's responsibility, but we can help with packing and loading of need. Delivery: EXW Székesfehérvár

Condition: good (used), Year of construction: 2001, functionality: fully functional, Grinding wheel 508x254 (305) mm, regulating wheel 330x254 (305) mm, regulating wheel speed 0-115 rpm, grinding wheel rotation speed 45 m/sec, grinding diameter 2-150 mm, grinding wheel drive 45 kW, machine weight 6.5 tons, space requirement approx. 3.0x1.5 m The machine will be equipped with a new Siemens S7 control system with new control panel, dressing quill SS electrically controlled via servo motor. Machine will be completely checked, defective parts repaired or replaced. Iodpjuy Ifgsfx Addjal Various options possible (KM system, infeed/outfeed, workpiece rulers etc.)

Condition: excellent (used), Year of construction: 2011, EMCOturn E45 CNC lathe with C-axis Year: 2011 turning diameter 220 mm turning length 310 mm control Siemens 828D turning diameter over bed 430 mm spindle bore 45 mm spindle tunring speed 6.300 U/min x-travel 160 mm z-travel 310 mm number of tool places 12 Positions C-axis driven tools Iedpfx Adexvcrxodjal total power requirement 17 kW Transport dimensions ca. 3,3 x 1,5 x 1,95 m machine weight ab. ca. 3.300 kg Accessories/options: - C-axis and driven tools - driven tool holders axial and radial - static tool holders - documentations - backup - footpedal - tailstock - parts cather - 3-jaw hydraulic chuck - coolant tank Runned hours: 8173 Under power in our warehouse!

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 800 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, controller manufacturer: HEIDENHAIN, controller model: TNC 530i, table width: 870 mm, table length: 3,500 mm, table load: 3,500 kg, rotary table diameter: 800 mm, overall weight: 24,000 kg, spindle speed (min.): 60 rpm, spindle speed (max.): 12,000 rpm, coolant supply: 20 bar, spindle motor power: 22 W, spindle nose: ISO 40, number of slots in tool magazine: 60, tool length: 300 mm, tool diameter: 76 mm, tool weight: 8 g, input voltage: 400 V, Equipment: documentation/manual, Used 5-axis universal traveling-column machining center with Heidenhain TNC-530 CNC, Isdpfxjxixn Nj Addsal swivel head, integrated rotary table.