Four sided planer Griggio G 22 QUADRO

Griggio G 22 QUADRO

Condition: as good as new (ex-display), 1 roller table 3.0 m long x 0.77 m wide with 7 support rollers, with pneumatic lifting/adjustment chain with worm gear and bellows cylinder, with a timber transfer roller carriage with rubber turntable for 1-man timber feed, with 2 lift-up stop rollers for planks from the band saw that have already been trimmed on one side. Phsdpfet E Nw Tox Ah Uoa 1 roller table 3.5 m long x 0.77 m wide with 8 support rollers, with or without transfer roller carriage. Other similar roller tables also available.

Condition: reconditioned (used), Year of construction: 1989, Dear Sir or Madam, Phsdpfxepy Elde Ah Uja For sale is a partially overhauled Deckel FP1 milling machine equipped with a 3-axis Heidenhain TNC113 active control, notable for its ease of operation. This modern version, built in 1989, features central lubrication, an electric coolant pump, and a machine lamp, among other benefits. The machine has undergone extensive partial refurbishment in our workshop and is therefore in excellent condition. You are welcome to inspect the machine on-site at any time. Delivery time: on request Machine no.: 2102-xxxx Table: Rigid angled table or rotary-tilt-swivel table Travel (X/Y/Z): X 300 mm / Y 160 mm / Z 340 mm Quill travel: 60 mm Connected load: 1.9 kW Number of spindle speeds: 16 Speed range: 40–2000 rpm Tool taper: SK40 Feed: Infinitely variable 5–500 mm/min Rapid traverse: 1200 mm/min Equipment and accessories: 3-axis Heidenhain TNC113 digital readout with active control, infinitely variable feed regulation on all 3 axes, coolant unit, central lubrication, technical documentation, leveling feet, safety equipment (optional) Our service promise to you: - We are a certified master workshop specializing in mechanical engineering - All machines undergo thorough inspection - All lubricants and any worn parts are replaced in advance - Upon request, we can fully or partially overhaul your selected machine - If required, you can order additional accessories such as tools, etc., directly - We can also install further equipment such as safety devices upon request - We are happy to handle shipping and/or installation

Condition: good (used), Year of construction: 1998, Concrete mixing plant Imer Betomatik 508 -year of construction 1998 -Power approx. 10 cbm/h -Cement silo 40 t -mixing portal with mixer and control Phodpfx Ahom Uyvkj Usa -scraper arm with chain for 2 kinds of gravel Reference picture

Condition: used, Tenoning spindle 1 St. Number of milling agregates 5 St. Spindle diameter 50 mm Control Weinig, PC-Nexus # 2774 Weinig Unicontrol 6 with NC spindles Machine will be cleaned and completely checked before delivery ----- Technical data summary (please enquire about any additional accessories included) Item 1: Cross-cut saw ----- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3 kW > Radial adjustment path pneumatically controlled to 8 positions, e.g. for edge rounding from above > Laser aiming light for detecting the saw section Item 2: Rounding unit horizontal below ----- > Position: horizontal below > Motor power: 1.5 kW > Spindle diameter: 20 mm > Clamping length 25 mm > Spindle speed: 9,000 rpm > Max. tool flight circle: 130 mm > Axial adjustment path mechanically coupled with Crosscut saw > Adjustment path radial pneumatically controlled on/off Length stop NC controlled ----- > Length 3500 mm > Electronic length stop Item 3: Tenon and slot spindle ----- > Number of tools: variable, stepless adjustment, NC > Tool clamping length: 320 mm > Vertical spindle stroke: variable 254 mm, stepless adjustment, NC-controlled > Spindle speed: 3500 rpm > Tool flight circle max. 320 mm > Spindle diameter: 50 mm > Tool diameter max.: 320 mm > Motor power: 11 kW Item 4: 1. Profiling spindle (same and opposite rotation) ----- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 7.5 kW Item 5: 2nd profiling spindle ----- > Position: vertical right > Number of tools: variable, stepless adjustment, NC > Tool clamping length: 320 mm > Vertical spindle stroke: variable 254 mm, stepless adjustment, NC-controlled > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 11 kW 2 feed rollers axially pneumatic opposite the spindle controlled, 2 positions Rung guide consisting of: Guide ruler in the stop (area of ??the synchronous spindle), Rung support bar from above in the area of ??the profile milling unit vertically on the right and profiling spindle. Pos. 6: Profile milling unit horizontal top ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed ??9,000 rpm > Tool flight circle max. 130 mm > Axial adjustment range 30 mm, 8 positions > Radial adjustment range 125 mm, 8 positions Pos. 7: 3rd profiling spindle (fitting spindle) ----- Phjdpfsvu Hghex Ah Uoa > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment range 115 mm, 8 positions > Radial adjustment range 110 mm, 8-way turret > Spindle speed: 5850 rpm > Spindle diameter: 40 mm > Tool flight circle max.: 210 mm > Motor power: 3.0 kW Item 8: Profile milling unit/grooving unit from below ----- > Motor power: 3.0 kW > Tool clamping length: 125 mm > Axial adjustment range 100 mm, 8 positions > Radial adjustment range 1...

Condition: new, Year of construction: 2025, flue capacity: 510 kW Conventional yeld capacity: 407 kW flue diameter: 250 mm hot air delivery pipes: 4 x 350 mm flue length: 1900 mm oven width: 900 mm oven hight: 900 mm air flow: 26000 m³/h power consumption: 4500 W aproximate surface to heat up: 8000 m³ area to be heated: 1800 m² heater height without hot air conveying pipes: 3000 mm heater width: 1220 mm heater length: 2700 mm Phedpfx Ask Utrwjh Uoa weight: 1575 kg

Year of construction: 1977, condition: refurbished (used), I sell the double mitre saw Rapid DGS, year 1977. Tilting heads Phodpod N Rb Dsfx Ah Usa Drilling front heads on each side included Very good condition. Available immediately.

Condition: used, Miter cold circular saw KALTENBACH type KKS 400 NA Machine. No. 101701 Year of construction 1983 saw blade diameter 400 mm cutting range at 90° round Ø 130 mm sawing range at 90° square 120 x 120 mm sawing range at 90° rectangle 305 x 20 mm Cutting range at 45° round Ø 130 mm Sawing area at 45° square 110 x 110 mm Cutting range at 45° rectangle 245 x 30 mm Clamping range of collet feed 30 to 140 mm Working height 1000 mm miter cut 0 - 180 feed path 600 mm Saw blade speed 10 + 20 m/min. 2 steps motor power 1,7 and 2,6 kW hydraulic motor 1,5 kW Mains connection 380 Volt, 50 Hz - Hydraulic material clamp feed with infeed roller conveyor left 1500 mm - Feed path via double feed up to 1200 mm (2x feed, then sawing) Podpfjd N H A Njx Ah Ujha - Hydraulic material clamping with vertical clamping cylinder - miter cut - saw angle with manual adjustment - hydraulic feed control, cutting speed manually adjustable - 2 motor speeds for the saw blade speed - saw blade stroke steplessly adjustable - coolant unit with electric pump in the machine base - Hydraulic unit fixed to the basic machine - Parts counter with zero cut-off space requirement of the saw 2600 x 1200 x 1900 mm weight of the saw approx. 1400 kg good condition

Condition: used, CNC cycle controlled lathe HARRISON type Alpha 400 Plus Machine No. P30180/150 Year of construction 1998 center distance 1250 mm turning diameter over bed 400 mm center height 200 mm Swing diameter over cross slide 245 mm Swing diameter in the bend 585 mm bed width 313 mm face travel (X-axis) 250 mm Tailstock spindle diameter 73 mm Tailstock quill stroke 140 mm Tailstock quill mount MK 5 spindle bore 54 mm spindle head size Camlock D1 size 6 Phodpsh Hvk Asfx Ah Usa Spindle speed 20-2500 rpm. Spindle speed range (stage 1) 15-275 rpm. Spindle speed range (stage 2) 35-795 rpm. Spindle speed range (level 3) 110-2500 rpm. Feed rate X and Z 0.03 - 0.6 mm/rev. Rapid traverse speed X axis max. 2000 mm/min. Rapid traverse speed Z-axis max. 4000 mm/min. Threading function Metric / Inch / Diametral / Module Spindle drive power 7.5 KW Mains connection 400 Volt, 50 Hz, 23,5 kVA - cycle control Harrison Alpha / GE FANUC - language in French (France) - automatic gear range shifting in 3 steps (15-275, 35-795, 110-2500 rpm.) - electronic handwheels with different transmission ratios (1/10/100) - 3-jaw face spiral lathe chuck FORKARDT Ø 250 mm type CSN, 1 set of soft top jaws - quick-change tool holder MULTIFIX size B with 2 inserts - 1 piece of centering point running with the tool - 1 piece quick-action drill chuck RÖHM, 3-16 mm - hinged lathe chuck guard - hinged working area protection doors - chip tray with coolant device under the machine bed - Switch cabinet fixed to the machine - Interface RS 232 Space requirement L x W x H 2600 x 1450 x 1550 mm weight 1950 kg good condition

Condition: new, Type SK-1000-P6 Working width 1000 mm Min.working length 500 mm Working thickness 2-150mm Polishing roller speed - Frequency control Feeding speed 3-12,5 m/min Total motor power 13.87 kW Disc motor 1.5 kW*1 Cross motor 1.5 kW *1 Phsdpedmi Nijfx Ah Uja Screw roller motor 2.2 kW *2 Feeding power 2.2 kW Up and down motor 0.37kW*4 Swing motor 0.37kW *2 Working table up and down 0.55 kW Transport dimensions 3650x1850x2100mm Weight 4200 kg

Condition: new, saw blade diameter 370 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 100 mm 180x100 mm Working height 925 mm saw blade turning speeds 15 - 70 U/min total power requirement 1,8/2,2 kW weight of the machine ca. 0,71 t dimensions of the machine ca. 1,9 x 1,45 x 2,1 m ACTION PRICE!!! High-performance vertical circular saw hydropneumatic fully automatic.(20192) · miter left 60° + right 45° · Hydro-pneumatic control of the saw unit · Electro-pneumatic material feed unit · Smooth-running, powerful worm drive with large Phsdpjd Iin Hofx Ah Uoa Transmission ratio, integrated in a stable cast housing for Achieving optimal cutting results · Vice with double clamping arm for low-burr cuts Lateral quick shift when changing the miter · Precision prism guide of the gear head, laterally adjustable · Particularly stable base frame with built-in automatic cooling system · Large chip drawer · Chip removal brush in the saw blade protective hood MPS control: · Save cut start/end · Display of current consumption, number of pieces, cutting time... · Adjustable water cooling · Cutting pressure regulator ATTENTION: Price is without saw blade!!! (saw blade price EUR 204)