Hydraulic plate shears

hämmerle AS 10

Condition: used, functionality: fully functional, Year of construction: 2008, Used RAS 86.33 swing-beam guillotine shear with newly ground upper and lower blades, always serviced and rarely used. Dcjdpfsv Tk Exjx Alzeh Technical specifications: Year of manufacture: 2008 Weight: 6,800 kg Max. sheet thickness at 400 N/mm²: 6.3 mm Working length: 3,190 mm Stop depth: 5-1,000 mm Working height: 800 mm Stroke rate per minute: 30-64 N/min Connections: 400 V / 50 Hz / 40 A 3 PE / three-phase AC Power consumption: 18.5 kW Machine width: 3,830 mm Machine depth without angle stop: 2,195 mm Machine depth with angle stop: 3,275 mm Machine height: 1,725 mm Air pressure: 5 bar Frame overhang: 100 mm Tank capacity: 150 l

Condition: reconditioned (used), functionality: fully functional, LVD 4000 x 200T Press Brake Type PPBL 200/40 Capacity 4000 x 200T Maximum stroke 150 mm Weight 13.5T Dcjdpfx Aljwtmi Eozsh With mobile blade rack

Condition: new, Year of construction: 2025, functionality: fully functional, The CNC BAYKAL Hybrid Press Brakes combines all the benefits of both hydraulic and all-electric press brake systems into one. If you’re looking for press brakes that are fast, accurate, and energy-efficient, BAYKAL is the way to go. The CNC BAYKAL Hybrid Press Brakes can significantly save energy, save fuel, improve bending efficiency, reduce the risk of oil leakage, reduce installation costs, extend the service life of consumables, improve bending accuracy, reduce noise, and improve the working environment. Dodpfx Alerq D Niozsch The CNC BAYKAL hybrid press brakes system are designed with an individual electro-hydraulic servo drive system and servo pumps to control the for each of the left and right cylinders. The servo motor controls the output flow of the oil pump according to the program setting, and then controls the movement speed and position positioning of the slider, and there is no throttling phenomenon in the whole process. Therefore, all the energy output by the oil pump is supplied to the left-right oil cylinder. This control method does not have any energy loss, and the energy-saving effect is very prominent. With this system the hydraulics run on demand when the foot pedal is activated, rather than having a pump running continuously. This results in lower energy usage than a standard hydraulic machine as well as faster cycle times and extremely high accuracy. The flow and pressure of Y1 and Y2 oil cylinders are respectively controlled by two sets of servo bidirectional pump systems, and the oil in the upper chamber of the oil cylinder is directly pumped into the lower chamber of the oil cylinder through the oil pump to realize the lifting of the beam. The reverse rotation of the oil pump pumps the oil in the lower chamber of the oil cylinder directly into the lower chamber of the oil cylinder to realize the pressing and bending of the upper die. Applicable between from 100 Tons to 1250 Tons, the synchronization of the left and right of the upper beam of the CNC BAYKAL hybrid press brakes is controlled separately by two sets of servo bidirectional pumps.

Condition: used, operating hours: 22,327 h, Fiat-Hitachi Fh 220 | Used Tracked Excavator | 22327 hours 📍Location: Germany, Meppen 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 15000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* Dcsdpfx Asx N Havelzjh 👷‍♂️ Inspected by an independent expert 63 inspection points 37 approved ✅ 19 imperfect ℹ️ 7 issues ⚠️ 📌 Inspector's Comment: Heavily used machine. Air conditioning not available. Windshield wiper is defective. Ventilation of the hydraulic oil is defective. Operating hour meter is defective; no reliable information available. Track shoes can be cut at an additional cost to reduce transport width. The year of construction is unknown and cannot be verified. The operation manual states 1980 or 1990, but this cannot be confirmed. The operating hour meter is from another machine, the displayed hours are incorrect. The machine has possibly between 20,000 and 30,000 hours. The cabin has been replaced and is not original. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39638 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: ready for operation (used), Year of construction: 1969, Centre height: 355 mm Centre distance: 3000 mm Max. swing diameter over bed/gap/cross slide: 715/790/520 mm Spindle bore: 86 mm Dcodpfsxpuu Eex Alzeh Spindle mount according to DIN 55027: Size 11 Quill taper of tailstock: MK 5 21 spindle speeds: 5.6 - 560 rpm 42 feeds longitudinal/cross: 0.09 - 5.6/0.045 - 2.8 mm 22 Whitworth threads: 2 - 28 TPI 28 metric thread pitches: 1 - 14 mm 27 module thread pitches: 0.25 - 3.5 module 32 module threads: 4 - 56 module 32 diametral pitch threads: 8 - 112 DP Drive motor, pole-changeable: 380 V, 7/11 kW Weight approx.: 7 t Space requirement approx.: 6000 x 2300 mm

Condition: used, Year of construction: 1993, Technical details: sheet width: 3050 mm plate thickness: 6,0 mm distance between columns: 3460 mm no. of strokes: min./max.: 9 / 17 Hub/min back gauge: 750 mm (motorisch) mm cutting angle: 0,5° - 3,0° ° cutting gap adjustment: manuell mm Djdpfx Aou Rni Hslzech down holder: 18 Stück (hydraulisch) Stück Table dimensions: 380 x 3100 mm total connected load: 7,5 kW weight of the machine ca.: 4,56 t dimensions of machine: L: 3,64 x B: 2,55 x H: 1,58 m Equipment: With side stop L: 1000 × W: 100 × H: 60 mm and stop bar 990 mm, with 8 supports Operation via control panel and foot switch Cutting zone lighting Stroke counter Machine feet *

Condition: used, Year of construction: 1973, pressure 200 t chamfer lenght 3600 mm distance between columns 2650 mm dayligth 500 mm throat 300 mm stroke 250 mm working feed 10,5 mm/sec return speed 100 mm/sec ram stroke speed 150 mm/sec table height 900 mm oil volume 500 l total power requirement 37 kW weight of the machine ca. 17800 kg dimensions of the machine ca. 3710 x 1800 x 3390 mm Equipment: - Controlled axes Y1 + Y2 - Manual X-axis with digital position display - Set of upper and lower tools - 2x stop fingers - 2x front support arms - Hand and foot controls - Side + rear safety guard - Operating instructions Dcjdpjt I D U Ejfx Alzoh

Condition: new, fuel type: diesel, color: yellow, operation weight: 2,000 kg, chain condition: 100 %, emission class: euro5, Year of construction: 2026, Equipment: UVV, additional headlights, cabin, gripper hydraulics, hammer hydraulics, hydraulics, onboard computer, rubber tracks, standard shovel, NEW: Shantui SE20 Mini Excavator (2.0 t) Premium features at a great price – Now available for pre-order at Bagger2go! The brand-new Shantui SE20 is here! Compact, powerful, and equipped with high-quality features – ideal for gardening and landscaping, civil engineering, construction companies, and rental companies. Impressive technology: • Engine: Kubota D902 – powerful, reliable, and low-maintenance • Rotator: Original Danfoss – proven quality • Hydraulics: Hengli components – robust and efficient • Chassis: hydraulically adjustable from 99 cm to 130 cm – ideal for narrow access routes • Articulated boom: maximum flexibility even in confined spaces • Two speeds: precise maneuvering or fast routes • Hydraulic control: AUX 1 & AUX 2 digitally controlled – flow rate precisely adjustable • Control: Proportional joysticks with rocker switches – intuitive and precise operation Your advantages: Djdpswg Etiofx Alzech • Secure your order now – special conditions for a limited time only • Lease-to-own available – we offer flexible financing solutions • Directly from Bagger2go GmbH – your partner for compact construction equipment

Condition: good (used), Year of construction: 1993, Pressure 150 t folding length 3550 mm column width 3050 mm Control Cybelec DNC 880S stroke 700 mm throat 350 mm machine weight approx. 15.000 kg machine height 3.900 mm Accessories/equipment: - Bending aid in front of the machine - Parking space for bending aid - 3 pieces stop fingers Djdjgz S S Sopfx Alzsch

Condition: good (used), functionality: fully functional, Year of construction: 2000, sheet thickness steel (max.): 16 mm, back gauge: 1,000 mm, cutting length (max.): 3,150 mm, foot switch motorized arrester behind cutting angle adjustment Technische Daten / technical details: Schnittleistung / max. cutting capacity 16 mm max. Schnittlänge / max. cutting length 3150 mm Anschlag / limit stop 1000 mm Gewicht der Maschine / weight 16300 kg Dcsdpfxov Syyvo Alzsh Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.