Wide belt sander

HEESEMANN KSA 8 et KSA 8-U

Condition: excellent (used), Year of construction: 1996, OTT ALPHA 110 wide-belt sander - machine in stock - after the technical review - very good condition - German production - year of production 1996 - segment shoe - a perfect solution for varnish / veneer TECHNICAL SPECIFICATIONS: - grinding width 1100 mm - grinding height 1-150 mm Iodpfogi Dryox Aa Isar - combi unit with task-controlled membrane sanding shoe - engine power 11 kW - blowing on the belt - pneumatic oscillation - two types of belt speed 4.5 and 18 m / s - aggregate with felt roller - engine power 0.75 kW - shaft oscillation - aggregate with a cleaning brush - engine power 0.75 kW - smoothly regulated feed - feed speed range 4-18 m / min - 1.5 kW feed motor power - electric height adjustment - vacum table - 3kW fan motor power - diameter of nozzles 4 x 120 mm and 1 x 150 mm Transport dimensions: - length 200 cm - width 245 cm - height 210 cm - weight 2500 kg 1. The Alpha Combi aggregate is a grinding unit with a contact shaft with a diameter of 150 mm and a hardness of 90 shor. It is integrated with a sectional pneumatic shoe with a section width of 27 mm 2. EMS 27 optical system - detects minimal unevenness and adjusts the pressure force of a particular section of the shoe at a given point of the ground element. 3. It is possible to control the individual sections of the shoes adjacent to each other in the range -2 to +4 -

Condition: used, machine/vehicle number: 008027, Max. machining width: 1350 mm Min. machining thickness: 200 mm Working Table: Fixed pass height Vacuum feed belt: yes No. Operating units: 4 Nr Iajdpfx Aaowvq E Ao Ijr

Condition: new, Year of construction: 2025, New Machine Year of manufacture: 2025 Iajdow Tfxwopfx Aa Isr Equipment and technical specifications: - Base unit: Vertical panel saw SECTOR 1257, cutting height 2200 mm x cutting length 5300 mm - PowerPackage 400V incl. TRK extraction system, SuperCut scoring unit, digital vertical readout, stepless speed control (9 kW power) - Strip stop for repeat horizontal cuts, millimeter scale, max. strip height 650 mm - Alignment laser - Cut optimization package incl. touchscreen on operator panel Availability: Short-term Location: Flörsheim

Condition: used, Year of construction: 2001, Abrasive belt length, 1st unit: 2150 mm Max. working width: 1300 mm Number of belts: 3-belt Iedpfxsxzi S Ns Aa Ijar 1st unit: Cross belt design 1st unit: Cross belt sanding shoe 1st unit: Electronic segmented shoe Abrasive belt width, 1st unit: 150 x 4800 mm Drive, 1st unit: kW 2nd unit: Longitudinal roller design 2nd unit: Steel calibrating roller Abrasive belt length, 2nd unit: 2150 mm Abrasive belt width, 2nd unit: 1350 mm Abrasive belt speed, 2nd unit: 18 m/sec 3rd unit: Shoe unit design 3rd roller: Electronic segmented pressure beam SDS Sy Sanding shoe, 3rd unit: Electronic individual segments, 32 mm width Abrasive belt length, 3rd unit: 2150 mm Abrasive belt width, 3rd unit: 1350 mm Suitable for lacquer sanding: Yes Belt blow-off: Yes Vacuum conveyor belt: Yes Feed speed, fixed: stepless 5-15 m/min Control: Touchscreen control Electr./pneum. belt oscillation: electric Infeed height: variable (lower table runs) Table stroke: electro-motor Digital table display Working height or feed table height: 880 mm Location: Nattheim

Condition: excellent (used), Year of construction: 1997, total length: 4,400 mm, working width: 1,400 mm, height adjustment type: electric, input frequency: 50 Hz, input voltage: 400 V, Good day, We present for sale Heesemann LSM 8 wide-belt grinding machine in a system of four grinding units: transverse unit / longitudinal unit with calibration roller / longitudinal unit with reverser / longitudinal unit + dust collection brush. Machine after mechanical overhaul and inspection, checked and set up, ready to work. Year of construction: 1997 Feed speed: 5-25 m/min - infinitely adjustable from the control panel Working height: 880 mm Workpieces machined: 3-80 mm Energy demand: 107 kW - at full load Total weight: 10250 kg Control: control panel with physical buttons and display Controls: and side of abrasive belt change: right Iedpfx Aaou Hlzfj Ioar Single conveyor belts, perforated, perforated table with channel and vakuum fan - for safe transport of short workpieces. Part pressure: rubberized rollers fi 70 mm. Abrasive belt Q aggregate: 5400 mm x 150 mm Motor power: 13/17 kW - two-speed motor - belt speed: 12 m/s / 24 m/s Belt "sergeant": 4850 mm x 141 mm Longitudinal belts L aggregate: 2620 mm x 1450 mm Motor power: 16.5 kW / 21 kW - two-speed motors - 10 m/s / 20 m/s Pressing: Pressure beams with computer-controlled selective pressure control - CSD® system with infinitely variable pressure adjustment of individual pressure elements for trouble-free multi-row loading. Reading control roller distance: 16 mm. The abrasive belts have a cleaning system - blow-off and dust extraction. Workpiece tolerance compensation to a maximum of 2 mm by maintenance-free pressure electromagnets. Working width, as well as the beginning and end of the grinding of the pressure bar electronically controlled. Cleaning of the abrasive belts by means of blow-off tubes, dust extraction by means of integrated exhaust channels, activation of the blow-offs automatic, upon detection of workpieces in the machine. At the end, a cleaning/deblasting brush fi 150 mm with an exhaust duct for dust removal. Additional blow-off rotors at the exit of the machine with an exhaust channel. Commissioning at the new site and initial training in operation - to be agreed. Price negotiable on request, machine available immediately.

Condition: like new (used), Year of construction: 2017, operating hours: 108 h, functionality: fully functional, working width: 1,650 mm, power: 370 kW (503.06 HP), type of input current: three-phase, workpiece height (max.): 160 mm, input frequency: 50 Hz, input voltage: 400 V, workpiece width (max.): 1,650 mm, space requirement length: 7,660 mm, COSTA LEVIGATRICI 1650 CALIBRATOR/SANDING MACHINE This machine is in really new condition with only approximately 100 hours of operation. It is fully functional and operates without any issues. Technical Specifications * Machine Type: Automatic sanding / calibration line Iajdpfeyt H Dnjx Aa Isr * Working Width: 1650 mm * Feed System: Motorized conveyor belt with variable speed control * Working thickness: 3 to 160 mm Lower Section: * 3 sanding steel roller units * 1 finishing pad unit * Cleaning system with blowers and brushes Upper Section: * 3 sanding steel roller units * 1 finishing pad unit * Cleaning system with blowers and brushes Unit Power: * From 18.75 kW up to 75 kW (depending on the unit) Control System: * PLC control with touchscreen interface Safety: * Safety sensors * Emergency stop system

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 5350x4650x1820 mm Isdsvz Hdyepfx Aa Isar Weight 7500 kg Total power requirement 47 kw

Year of construction: 2004, condition: ready for operation (used), A 5-roller Heesemann wood sanding machine is available. Sanding belt dimensions: 2620 x 1350mm, sanding width: 1300mm, working height: 1000mm, roller diameter: 250mm, belt speed: 24m/s, suction volume: 89.5m³/min, suction nozzle diameter: 250mm + 180mm, air speed: 20m/s. Dimensions X/Y/Z: approx. 5200mm/2300mm/2300mm, weight: approx. 13000kg. Documentation available. On-site inspection is possible. Iajdpfx Aet Amc Uea Ijr

Condition: used, functionality: fully functional, Year of construction: 2024, operating hours: 112 h, load capacity: 4,999 kg, lifting height: 7,600 mm, fuel type: diesel, construction height: 2,580 mm, empty load weight: 10,780 kg, drive type: Diesel, construction width: 2,490 mm, Rigid telehandler Technical condition: New Front tires condition: 80 - 100% Rear tires condition: 80 - 100% Rear work lights, front work lights, full cab, CE certificate, Iedetunnyopfx Aa Ijar Pictures may serve as sample images - Heated rearview mirrors - 4x additional LED work lights - LED road lighting front - 7 inch display - Wheel chocks - LED work lights on telescopic boom, fixed section 2x - Manual hand throttle lever - TÜV preparation 40 km/h - Flow limiter - Height-adjustable automatic trailer coupling, 40 mm pin - Remote control button for the Easy Connect System (ECS) - Hydraulic quick-change system - Car radio USB Bluetooth with external microphone 100W - Air-suspended low-frequency textile seat Grammer - Start/Stop automatic system - Manual air conditioning - Premium package - Safeview camera pack, rear right side - Remote control button for Easy Connect System (ECS) - Tilt lock - Complete trailer coupling kit - Easy Link STD module additionally for pneumatic trailer brake and Comfort Stee - Regenerative hydraulic vibration damping Active CRC

Condition: excellent (used), Working width: 1,360 mm Workpiece thickness: 3 – 160 mm Abrasive belt dimensions: 1,360 x 1,900 mm Variable feed speed: 7 - 14 m/min Feed motor power: 1.1 kW, 400 V, 50 Hz Extraction port diameter: 2 x 160 mm Compressed air supply: 6 bar Dimensions (L x W x H): 2,160 x 2,260 x 2,025 mm Weight: approx. 2,200 kg 1st unit: Steel contact roller Motor power: 15 kW, 400 V, 50 Hz 2nd unit: Sanding pad, rigid for fine sanding of solid wood & pneumatically controlled (timed) for veneer sanding 3rd unit: Cleaning brush Abrasive belt oscillation with selector switch Feed conveyor oscillation pneumatic Motorized workpiece thickness adjustment with LED display Units equipped with emergency brake device Emergency stop button at infeed Roller table extension at infeed Complete documentation included Iajdpjych Igofx Aa Ijr Note – Used machines: • Subject to technical changes and prior sale. • Prices quoted are ex location – loaded on truck! • The machine has been cleaned and functionally tested. • All machines are sold as inspected, with no warranty or guarantee. Buyers are free to inspect the machines at the site. • Special agreements are only valid in writing. (We will only respond to inquiries that include your address and telephone number!)