Punching and shearing system
HEIDEL MB W 140 OP 4

Name: HEIDEL MB W 140 OP 4
Brand: HEIDEL
Availability: InStock

Year of construction

1991

Condition

Used

Location

Germany

Punching and shearing system HEIDEL MB W 140 OP 4

Show map

Machine data

Machine type:: Punching and shearing system

Manufacturer:: HEIDEL

Model:: MB W 140 OP 4

Year of construction:: 1991

Condition:: used

Price & Location

Location:: , Germany

Call

Details about the offer

Listing ID:: A17631843

Reference number:: 1087-0100639

Update:: 09.12.2024

Description

Technical details:

operating pressure: 160 bar
distance between columns: 2000 mm
throat: 1000 mm
operating pressure: pneum. min/max 6/8 bar
operating pressure: hydr. min/max 160/210 bar
voltage: 380/50 V /Hz
table surface area: 1900x1000 mm
height over floor: 1000 mm
Cedpfx Afeu Icxdsleaa
tool clamping area: 1600x350 mm
quantity of oil : 400 l
total power requirement: 25,0 kW
weight of the machine ca.: 7,1 t
dimensions electric cabinet LxWxH: 1,0x0,3x1,4 m
dimension machine xH: ca. L:2,2xB:3,4xH:2,2 m

CLIP PUNCHING DEVICE or CUTTING PRESS or CLIP PRESS hydraulic
- There are two machines on sale!
- type of machine: folded punching device

The machine has been used to punch holes in dashboards of cars. (incl. upper and lower tool)
On the table are mounted the material intake and the sliding unit for the cut and hole punching.

equipment:
- light curtain
- hydraulic pack
- electric cabinet
- control panel
- workpiece counter
- manual- and automatic operation possible
- emergency stop

On sale as is.
i.D.

*

Seller

Registered since: 2012

809 listings online

Call

Send inquiry

Telephone & Fax

+49 341 6... show

+49 341 5... show

Fax:

These listings may also fit your interest.

Listing

Band Saw - Vertical MOESSNER REKORD SSF 1050

Eislingen/Fils

1,164 km

Band Saw - Vertical
MOESSNER REKORDSSF 1050

Call

Condition: used, Year of construction: 1973, machine/vehicle number: 20591, roll diameter:500 mm Caodpfx Afjcxxr Esloa throat:1050 mm workpiece height:400 mm volt:400 V table-size:750 x 800 mm total power requirement:5,5 kW weight of the machine ca.:1,5 t dimensions of the machine ca.:2,4 x 1,0 x 2,2 m stable cast stand construction, cutting speed adjustable via manual gearbox and variator, band tensioning device, tilting work table +/-40°, rear add. table, various saw band guides, grinding device, work light, foot pedal

See details

Listing

Centrifugal evaporation unit Centritherm CT-6

Hradec Králové

1,411 km

Centrifugal evaporation unit
CentrithermCT-6

Call

Condition: used, Used Alfa Laval model CT-6 "Centritherm" stainless steel contact parts centrifugal evaporation unit. Approximate water evaporation capacity 800 kg/hr. Evaporation unit consists of: 1) CT-6 Centritherm evaporator mounted on skid 2) Alfa Laval model P2-HL plate heat exchanger/condenser 3) Control panel 4) Duplex filter 5) Feed pump model 6) Concentrate pump model 7) Condensate centrifugal pump 8) Vacuum pump Pompe Travaini model TRMB 40-150/F 9) Flash cooler 10) Piping Cajdpfx Aolc Dwvsflja 11) Tools for lifting cones and the bowl 12) Original technical documentation in German.

See details

Listing

Pipe + section plant / tube welding line MEER/ SMS MEER/ ELOTHERM

Germany

856 km

Pipe + section plant / tube welding line
MEER/ SMS MEER/ ELOTHERM

Call

Condition: excellent (used), Year of construction: 2012, section dimension max. 150 x 50 mm pipe Ø 50 – 150 mm wall thickness 1,5 - 5,5 mm reference material (tensile strength) 600 N/mm² coil Ø max. 2.100 mm coil weight max. 10 t finish pipe length max. 9.000 mm round pipe Ø according to list rectangular pipe according to list speed 100 m/min working direction left → right The line consists of: 1. entry part: double carousel decoiler coil opener/pinch roll unit/leveller crop shear strip tail end welding machine strip guide strip twister/pinch roll unit/strip accumulator entry strip accumulator Caedsuc Sw Ajpfx Aflja edge trimming exit twister 2. forming part: No. of horizontal stands: 4 No. of vertical stands: 3 3. welding part (HF) 4. calibrating part 5. separation 6. edge bevelling 7. blowing out 8. bundling 9. hydraulics 10. electrics

See details

Listing

Hradec Králové

1,411 km

Anhydro Spray Dryer
AnhydroPSD 52

Call

Condition: used, Year of construction: 2004, Used APV Anhydro model PSD 52 stainless steel (AISI 316) spray dryer. Unit rated 9,3 kh/hour water evaporation capacity at 350°C maximum air inlet temperature. Drying tower has diameter approx. 1000 mm x 700 mm height of straight side x 1100 mm conical height. Includes (1) rotary atomiser CMT model AF07 driven by 0.7 kW IBAG motor, diameter of wheel 63 mm, speed range 10.000 - 60.000 rpm. Unit also includes 12 kW electrical air heater, cyclone, fan and main switchboard with integrated control panel. Caedpfxjuk Ehxj Aflsa

See details

Listing

Low loader semitrailer DOLL Tiefbett T2E-S3FS21 panther FORST

Oppenau

1,103 km

Low loader semitrailer
DOLLTiefbett T2E-S3FS21 panther FORST

Call

Condition: new, maximum load weight: 29,500 kg, overall weight: 42,000 kg, axle configuration: 2 axles, loading space length: 6,100 mm, loading space width: 2,550 mm, total width: 2,550 mm, total height: 300 mm, Year of construction: 2025, Equipment: ABS, * DOLL panther running gear + 5-year warranty * DOLL tronic operating and control system incl. radio remote control * Hydraulically detachable gooseneck * Reinforced chassis platform * Rear ramps * External main frame * Hydraulic steering * Comprehensive load securing package * Low bed length: 11,750 mm (6,100 mm + 5,650 mm) or 12,400 mm (6,700 mm + 5,700 mm) * Unladen weight: 13,700 kg (+/- 2%) * Optional: extensive range of accessories This semi-trailer is available with a low bed length of 6,700 mm or 6,100 mm and a short delivery time. Caodpfjgvr T Hjx Afloa Images may differ from the original. All information provided without guarantee. Contact: Tel.:

See details

Listing

Stamping- and forming machine BIHLER GRM 80

Grebenau

1,004 km

Stamping- and forming machine
BIHLERGRM 80

Call

Condition: excellent (used), Year of construction: 1981, functionality: fully functional, equipped with: 1 Right hand feeding system 1 Eccentricpress 250 kN 4 Standard slide unit 1 Narrow slide unit working range: wire diameter range: up to 6,0 mm stripmetal width: up to 80 mm feeding length: up to 520 mm Csdpfx Ajr D N Eqefljaa output: 10 - 250/min

See details

Listing

Borrby

1,110 km

Profile bending machine
RoundoRS 5 CNC

Call

Listing

Grebenau

1,004 km

Roll pointing machine
KROLLMANNDWU 1

Call

Listing

Gretzenbach

1,191 km

Fire/Rescue
Mercedes-Benz1428 AF 4x4

€25,250

Fixed price VAT not applicable

Call

Condition: used, mileage: 19,950 km, first registration: 11/1989, fuel type: diesel, axle configuration: 4x4, gearing type: mechanical, Year of construction: 1989, Equipment: all wheel drive, Mercedes-Benz 1428 AF 4x4 (central and rear axle lock, gear reduction) with 7 seats Water tank: 2,500 liters Pump: Metz with 2,800 l/min Additional equipment: Quick attack on the right with 50 meter hose Dimensions (LxWxH): 7100 x 2300 x 3000mm Wheelbase: 3800 mm Tires: 275/70 R22.5 Csdefarx Uopfx Afljaa

See details

Listing

Laser cutting machine TRUMPF TruLaser 5030 FIBER + Liftmaster Compact

Slovakia

1,603 km

Laser cutting machine
TRUMPFTruLaser 5030 FIBER + Liftmaster Compact

Call

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 45,208 h, laser hours: 32,072 h, laser power: 3,000 W, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness aluminum (max.): 8 mm, sheet thickness brass (max.): 6 mm, sheet thickness copper (max.): 6 mm, table length: 3,000 mm, table width: 1,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 150 mm, feed rate X-axis: 240 m/min, feed rate Y-axis: 240 m/min, feed rate Z-axis: 240 m/min, positioning speed: 240 m/min, positioning accuracy: 0.02 mm, year of last overhaul: 2024, feed length X-axis: 3,000 mm, feed length Y-axis: 1,500 mm, feed length Z-axis: 115 mm, working range: 3,000 mm, Equipment: cooling unit, documentation/manual, safety light barrier, The laser is in operation, can be inspected and tested. Regularly serviced in good technical condition. The machine is also sold as a Liftmaster Compact. Casdpfx Aev Im Irjflja

See details

Advertise here