Decoiler - expansion mandrel 4 t

HEILBRONN

Condition: used, Year of construction: 1959, total length: 3,500 mm, total width: 1,200 mm, total height: 1,500 mm, Colour: Green Empty weight: 2.000 kg Ppedjy Idtwopfx Acror - Year: 1959 - Documentation available: No - CE certificate present: No - Serial number: 37 - Drive system: Conventional - Centre height [mm]: 270 - Swing over bed [mm]: 540 - Carriage turning diameter [mm]: 360 - Distance between centres [mm]: 1500 - Bed width [mm]: 450 - Spindle bore [mm]: 62 - Min. spindle speed [rpm]: 14 - Max. spindle speed [rpm]: 710 - Options: Fixed steady, Three-jaw chuck - Transport dimensions: 3500mm x 1200mm x 1500mm (l x w x h) - Transport weight [kg]: 2000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1970, pressure:63 t throat:250 mm stroke:8-100 mm table depth:710 mm table width:500 mm ram head dimension:450x280 mm Podpjcxxx Hofx Acrspr ram adjustment:63 mm no. of strokes:140 Hub/min total power requirement:7 kW weight of the machine ca.:3,5 t

Condition: excellent (used), Weisser Heilbronn Senior Lathe with Accessories: - special machine - motor can regulate the speed of spinning to perfection - center to center - 1500 mm - turning diameter over bed - 800 mm - turning diameter over support table - 500 mm - weight - 7 tons. Pedpfoh Ad N Uox Acropr - dimensions - 200 mm lenght; 1700 mm wide; 2100 mm height - accessories included - check pictures.

Condition: used, Year of construction: 1976, turning diameter over bed 455 mm turning diameter over slide rest 285 mm turning length 1.000 mm center height over bed 225 mm centre distance 1.000 mm digital readout 2-Achsen ANILAM bed width 330 mm spindle taper KK 6 DIN 55027 spindle bore 45 mm turning speed range 16 - 1.000 U/min power requirement 3,0 / 4,2 kW taper in tailstock-quill MK 4 Ppsdpfxsy Ezyvj Acrer dia. of quill 62 mm quill stroke 145 mm voltage 400 V total power requirement 4,5 kW weight of the machine ca. 1,95 t dimensions of the machine ca. 2,45 x 1,10 x 1,80 m - Serial-No.: 29-2561 - ANILAM 2-axis digital readout - 4-jaw tool holder - coolant equipment ATTENTION!!! Machine is sold without a chuck. Upon request and for an additional charge, the following 3-jaw spiral chucks can be included: - CENTER Ø 200 mm = 780.00 EUR - CENTER Ø 250 mm = 1,030.00 EUR

Year of construction: 1976, condition: good (used), strip width: 300 - 1.350 mm Ppodpfx Aebh Ubwecrer strip thickness: 0,35 - 3 mm coil weight: 12,5 t mandrel Ø: 508 mm

Condition: used, Year of construction: 1975, total length: 4,400 mm, total width: 1,450 mm, total height: 1,700 mm, Empty weight: 4.000 kg - Year: 1975 - Documentation available: Yes - CE certificate present: No - Serial number: 1677 Ppedpfx Asxixh Nocrsr - Drive system: Conventional - Centre height [mm]: 230 - Swing over bed [mm]: 460 - Distance between centres [mm]: 2000 - Spindle bore [mm]: 70 - Min. spindle speed [rpm]: 7.1 - Max. spindle speed [rpm]: 1400 - Options: Three-jaw chuck, Quick-change tool post, Travelling steady, Fixed steady - Transport dimensions: 4400mm x 1450mm x 1700mm (l x w x h) - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1978, machine/vehicle number: 4788, Capacity: 35 ton Throat depth: 225 mm Ram stroke: 8 - 80 mm Slide adjustment: 50 mm Ppjdpfx Acew Tukiorer Shut height (stroke down, adjustment up): 325 mm Table surface area : 600 x 450 mm Slide area: 300 x 225 mm Number of strokes: 160 s.p.m. Required power: 2,2 kW Dimensions L x W x H: 1000 x 1600 x 2200 mm Weight of machine approx.: 1,9 ton

Condition: refurbished (used), functionality: fully functional, Löser centerless tube grinding machine - belt grinding machine - polishing machine - Cylindrical grinding machine Centerless tube grinding / polishing machine for workpieces with a minimum length of 1100mm. The machine was built in 1988 and was completely overhauled in 2012. The machine was converted for polishing and then only polished around 10,000 parts. The machine was no longer used after that. During the general overhaul, the motors, bearings and the entire control cabinet with the frequency converters were completely replaced. The machine can be used for both wet grinding and polishing. Wastewater treatment including pumps is not yet available. We can retrofit these for you free of charge according to customer requirements. The transport systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. The machine can process pipe diameters from 10mm to 160mm. The grinding motors / polishing motors have an output of 7,5kW per station. Ppedpfx Aopugwijcror The system can be viewed by appointment in our warehouse in D-63128 Dietzenbach.

Condition: used, Year of construction: 1973, machine/vehicle number: 104530, pression: 100 t throat: 350 mm table size: 690 x 840 mm clearance hole in the die: 160 mm Ø Pedpfx Acjddhw Sjrspr tappet area: 450 x 600 mm tappet adjustment: 80 mm stroke adjustment: 8 - 100 mm number of strokes: 60 /min engine: 380 V, 5,5 kW space needed: 1850 x 1850 x 2650 mm weight: 6800 kg

Condition: excellent (used), Year of construction: 1980, turning diameter 300 mm Ppodpfeytg Uysx Acror turning length 1700 mm swing diameter over bed slide 600 mm total power requirement 12,5 kW

Condition: new, Year of construction: 2025, Sheet metal folder ZGR-3140/1.0 We have a new, high-quality folding machine of 3140 mm/ 1.0mm. This machine guarantees very high quality and agility of the work doing by the roofers. Our main task is the production of folding machines, with which we are concerned many years. Pedpfxechwa Do Acrepr The bending machine is equipped in degree scale, Romans screws, rear frame and gas struts. Directly from manufacturer! - max. working length 3140 mm - steel plate to 1.0 mm - our machines bend both a copper sheet and aluminum sheet - the total weight of machine is 600 kg - the clearance between the lower beam (fixed) and the upper beam (pressed) of 80 mm - bending angle of 145 degrees - thickness of the bending beam of 20mm - new, full machine - delivery to the client - certificate CE - TAPPING ANGLE IS FREE !! Price excl. shipping We provide invoices with 0% of tax. Delivery every week :)

Condition: ready for operation (used), Year of construction: 1983, turning length 1500 mm Pjdpfx Ajxfwc Rjcrspr turning diameter 475 mm turning dia. over face-slide 290 mm turning dia. in gap 655 mm turning speed range 14.0 - 2000 U/min feeds - longitudinal 0.05 - 0.736 mm/min spindle passage 61.0 mm tail stock MK 4 quill stroke 200 mm diameter of quill Ø 70.0 mm spindle head DIN 55022 GR 6 bed width 330 mm voltage 380 V total power requirement 7.5 kW weight 2400 kg range L-W-H 3080 x 1160 x 1485 mm From a maintenance workshop (university hospital) in good condition (!!) With original documentation + machine card Features: - Robust electric motor-driven conventional lathe - KLOPFER 4-jaw chuck Ø 200 - MULTIFIX steel holder with 3x inserts - Movable steel holder guard - Adjustable bed stop - Movable tailstock incl. center point - Swiveling machine light - Machine swing feet - Chip guard (movable from behind) - EMERGENCY stop button at the front - Original operating instructions + machine card

Condition: used, Year of construction: 1988, strip width (20) 44 - 320 mm strip thickness 0,66 – 4 mm strip cross section max. 930 mm² Pedpfx Acelil Eweropr reference material (tensile strength) St42-2 (500 N/mm²) yield stress max. 280 N/mm² coil weight max. 4 t coil-dia max. 1.500 mm

Condition: excellent (used), Year of construction: 2009, decoiler - expansion mandrel Pjdeupg Scspfx Acrspr type: AE-050 strip width: 400 - 1.500 mm strip thickness: 0,5 - 3 mm coil weight: 20 t coil OD: max. 1.800 mm mandrel Ø: 508 mm year: 2009

Year of construction: 1988, condition: used, strip width (20) 44 - 320 mm strip thickness 0,66 – 4 mm strip cross section max. 930 mm² reference material (tensile strength) St42-2 (500 N/mm²) yield stress max. 280 N/mm² coil weight max. 4 t Pedpfjbicz Hsx Acropr coil-dia max. 1.500 mm