Decoilers for Coils

HESSE by COILTECH CMC S 500 300 M D1200

Condition: new, Year of construction: 2025, Single band console decoiler 500 mm - Loading capacity 1.500 kg - Inner φ 480-530 mm - with 4 clamping arms, ball bearings and with disc brakes Nsdsfvbxqspfx Abvjkw - max coil width: 500 mm

Condition: as good as new (ex-display), Year of construction: 2021, machine/vehicle number: 06 61 218, Comm. no.: Lg 32821 Single side decoiler BBT ABH 2000/400 exhibition machine, unused machine no.: 06 62 218 year of manufacture: 2021 Technical data load capacity approx. max. 2.000 kg strip width max. 400 mm Coil inner diameter approx. 450 to 520 mm Coil outer diameter max. 1,500 mm Unwinding speed approx. 2 to 15 min.-1 With adjustable drive and loop control via ultrasonic sensor (analog). Drive by frequency-controlled three-phase geared motor. Spreading of the support segments manually by means of hand crank via joints Number of supporting segments 3 Coil side guide via strong limiting arms, clampable. Reel stand in strong box construction as welded design. construction. Additional equipment: Shutdown "belt loop too small" by antenna switch, attached to the column of the bottom housing of the loop control. Infinitely adjustable in height. Tape side guide at the bottom housing of the loop control, Nsdpfx Abjg U Utvovjkw by means of lateral guide rods. The passage width is continuously adjustable.

Condition: new, plate thickness 0,8 mm throat 180 mm weight of the machine ca. 22 Kg dimensions of the machine ca. 500 x 450 x 160 mm Flanging machine is equipped with: - Emergency switch Nodpfx Aboht R Hmjvskw - Footswitch - 7 pcs. Roll sets

Year of construction: 1986, condition: good (used), strip width: max. 200 mm Nodpfx Aebh Ucbsbvokw strip thickness: 0,1 - 1 mm coil weight: 0,5 t mandrel Ø: 304 mm

Year of construction: 2023, condition: new, pressure 40 t Nkjdpfjp Udupjx Abvew throat 195 mm stroke 8-78 mm no. of strokes 76-190 Hub/min ram - range of adjustment 60 mm table surface area 650x380 mm table height 840 mm hole in the table Ø 110 mm ram surface 250x350 mm tool hole in ram Ø 40 mm total power requirement 3 kW weight of the machine ca. 2,2 t dimensions of the machine ca. BxTxH 1450x1220x2110 mm

Condition: used, Year of construction: 1995, material width 300 mm coil weight 1,25 t material thickness 0,4 - 3,5 mm coil internal diameter 320 - 420 mm coil external diameter 1300 mm material cross-cut 750 mm² no. of straightening rolls 11 straightening roll diameter 60 mm number of draw-in rolls 4 roll diameter 60 mm Nkodpfx Abswc U Izevjw speed 5 - 30 m/min power requirement 5,0 kW Weight 1,4 t Dimensions (WxDxH) 3,3 x 1,85 x 1,7 m Straightening machine (Type 1675-B11-FQ) with infinitely variable drive, driven straightening rolls, manual individual adjustment of the roller cassette, cntralized adjustment of the material width, outlet rolls Decoiler, single (Type 2350 B-FPS) not driven, with pneumatic lag break, hydraulic centralized expansion, pneumatic snubber roll coil loop control via sensor

Condition: used, coil weight 2 x 0,15 t clamping range 265 - 485 mm band width 200 mm Thickness of sanding paper 0,1 - 4 mm total power requirement 0,25 kW weight of the machine ca. 180 kg dimensions of the machine ca. 1,2 x 0,9 x 1,2 m Nkjdpfxscdrmis Abvew - motorized double-turn coiler - newly painted

Condition: like new (used), Year of construction: 2025, functionality: fully functional, Reel - straightening - combination strip width: 360 mm Strip thickness: 0.6 - 3.5 mm Cross-section: 900 m² at 400 N/mm² - Straightening rollers: 7 - Single roller infeed - Infinitely variable speed control via frequency converter - 2 pneum. draw rollers Reel: - Coil weight: 2000 kg - manual spreading - pneum. pressure arm Nsdetq Sgnjpfx Abvjkw - common base frame

Condition: ready for operation (used), Year of construction: 1971, laoding capacity: max. 250 Kg. Nksdpfodx Rzmex Abvow coil diameter: max. 650 kg. strip metal width: max. 100 mm

Condition: used, Year of construction: 2013, TRUMPF - TRUPUNCH 5000 S10 with ToolMaster - 2013 - type S10 - system Siemens Sinumerik 840D - year of manufacturing August 2013 - regularly maintained - work area 3050x1550 mm - including ToolMaster - 220 kN punching press Nksdpfx Aeyl Izljbvew - max 8 mm sheet thickness - max sheet weight upto 230-280 kg - max strokes (punching) per minute 1,600 / min for punching (E = 1 mm) - marking / decorative operations speed2,800 / min marking speed - linear ATC for 21 tools (1600) + 4 sheet holders - tool holders (casettes) - weight appr. 17500 kg - OPTIONS: This machine already has ACTIVE DIES (c2 axis moves in the “Z” direction). MULTITOOL GROOVING THREADING / Gewindeschneiden ENGRAVING / Gravieren??? SIGN / Signieren HANDLING ROLLING TOOLS / Umgang mit Rollwerkzeuge REPOSITIONING CYLINDER / Nachsetzzylinder - used condition as showed on photos - regularly maintained, good condition - under power hours 84545 (not working hours, operating hours appr. max 25000) - reason for sale change to laser cutting, a new laser came and needed space - short videos available