Plate Bending Machine - 3 Rolls

HESSE by ISITAN RM 1550 x 90

Condition: used, Year of construction: 2024, Rear section Primera DMC 4200 l 1-fold conveyor section Single-shoot distributor heads / f. 16 rows Long loading board for rear section Drawbar with folding support foot / lower linkage attachment Cat. 3 braked axle with parking brake / dual-circuit air brake system Ljdjuhnwvspfx Anxshl

Condition: used, Year of construction: 1982, Technical details: faceplate diameter: 2600 mm turning diameter over support: 2500 mm turning length: - mm centre distance: 1600 mm turning diameter over bed: 2900 mm spindle bore: 100 mm revolution per minute: gear steps U/min feed range: Überdrehen 0,12-31,5 Plandrehen 0,12-45 mm/min bed guideways length: 2900 mm max. workpiece weight between centres: 400.000 kgs total power requirement: 45 kW weight of the machine ca.: alle Komponenten zusammen: ca. 29,0 t machine dimensions LxWxH: 5.2 x 5,0 x 3,1 m 3-way measuring system with digital display RSF electronics Control panel Cooling unit for Rittal electric cabinet * Lodpfswtctysx Anxshl

Year of construction: 2004, condition: good (used), Build in 2004 Description/configuration: Complete line for automatic pallet strapping, automatic stretch-wrapping of pallets. Includes fully automated pallet conveying. Line with ""straight""-configuration, built with chain conveyors and configured as follows: > Straight chain conveyor, motorized, travel is long side leading, l~1100 mm, REF 25778.01 > pallet strapper Cyklop XZE-3111, REF 25778.30 > Straight chain conveyor, motorized, travel is long side leading, l~1100 mm, REF 25778.02 > Straight chain conveyor underneath wrapper, motorized, travel is long side leading, l~2600 mm, REF 25778.03 > ring style pallet film wrapper Cyklop GL 2000, REF 25778.40 > Straight chain conveyor, motorized, travel is long side leading, l~1100 mm, REF 25778.04 > Straight chain conveyor, motorized, travel is long side leading, l~1100 mm, REF 25778.04" Layout available Ledpfohrmlkjx Anxohl max speed in pallets/h: 50 pallets/h Chain conveyor Pallet width of up to 800 mm Pallet length of up to 1200 mm max height full pallet (max passage height): ~1700 mm Height of pallet conveying (min=300mm): ~400 mm max weight full pallet: ~1500 kg Over all length equipment: ~8000 mm Over all width equipment: ~6000 mm Over all height equipment: ~3500 mm Input Power: ~15 kw (whole line) Voltage: 400 V, 3 Ph, 50 Hz Air requirement: 6 bar Equipment at central warehouse Helmstedt with nearest airports: Hannover (~1,5 hrs), Leipzig (~2hrs), Berlin (~2,5 hrs) Condition: cleaned & in working conditions Machine available: upon request

Condition: used, Year of construction: 2014, total length: 1,500 mm, total width: 1,150 mm, total height: 2,400 mm, Weight: 3.600 kg - Year: 2014 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 441 Lhedpjxapftsfx Anxol - Power [kW]: 3.0 - Press force [ton]: 28 - Max. working width [mm]: 1000 - Column gap [mm]: 950 - Throat depth [mm]: 220 - Backgauge depth [mm]: 415 - Transport dimensions: 1500mm x 1150mm x 2400mm (l x w x h) - Transport weight [kg]: 3600kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 2008, Technical specifications: Working length: 2550 mm Frame width: 2050 mm Pressing force: 80 tons CNC control: OPERATOR II Graphic 14” TFT color monitor Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Automatic crowning Stroke: 350 mm Overhang: 420 mm Working height: 960 mm Ljdey D T Rwspfx Anxshl Motor power: 9 kW CE marking Dimensions (length x width x height): approx. 3400 x 2050 x 2550 mm Weight: approx. 6 tons Accessories: 1 set of tools: 1 upper tool punch: 120 mm 1 segmented die: V50, V35, V22, V16 Condition: Very good condition, little used, only approx. 5,350 operating hours The seller is not liable for typographical or data transmission errors. The machine’s appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: ready for operation (used), Year of construction: 2023, operating hours: 4,937 h, pressing force: 102 t, overall weight: 7,200 kg, number of axes: 8, This 8s AMADA HRB 1003 press brake was manufactured in 2023. It features a press force of 1000 kN and a stroke of 250 mm, making it suitable for various applications. With a weight of 7200 kg and a control system of AMNC3i with Lite Mode, it offers advanced capabilities. Consider the opportunity to buy this AMADA HRB 1003 press brake. Contact us for further details. • Stroke: 250 mm • Voltage: 400 / 415 V • Frequency: 50 Hz • Phases: 3 • Installed power: 18.6 kW • Full load current: 29.8 A Lodpjyk Dc Nsfx Anxehl • Noise level: 72 dB(A) • Press beam length: 3110 mm • Opening width: 520 mm • Axes: 7 programmable • Control: AMNC3i with Lite Mode • Configuration: Without crowning • Tool clamping: S-GRIP DUOTools available:3 Amada punches no. 831206, 835 mm long, and 1 split version 3 Amada punches no. 820806, 835 mm long, and 1 split version Plus dies: 3 pieces V 16 / H 120 / 85° x 835 mm long and 1 piece split design 2 pieces V 16 / H 120 / 88° x 835 mm long 3 pieces V 32 / 85° x 835 mm long and 1 piece split design 3 pieces V 8 / V 12 / 88° x 835 mm long and 1 piece split design 3 pieces V 16 / V 25 / 88° x 835 mm long and 1 piece split design 3 pieces V 8 / V 12 / 30° x 835 mm long and 1 piece split design

Condition: like new (used), Year of construction: 2008, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 45 m/min, rapid traverse Y-axis: 45 m/min, rapid traverse Z-axis: 45 m/min, controller model: Heidenhain iTNC530, table width: 960 mm, table length: 600 mm, overall weight: 9,000 kg, spindle speed (max.): 40,000 rpm, operating hours of spindle: 22,800 h, spindle nose: HSK E 40, number of spindles: 1, number of slots in tool magazine: 38, input voltage: 400 V, Equipment: documentation/manual, rotational speed infinitely variable, This machine has been used exclusively for copper processing. The coolant water supply is present but has not been used to date. In other words, a superb machine that has always done very light machining, has never seen coolant, and is equipped with a Weiss spindle running at 40,000 rpm. The machine comes as standard including: - Original documentation for the machine and the Weiss spindle - BLUM tool laser - Heidenhain TS-440 3D probe - Spindle and emulsion cooler Lhjdpfsxgukbex Anxel - Lockable roof (harmonica style) The machine can be inspected under power by appointment.

Condition: new, weight max. 5,0 t workpiece diameter 100 - 2500 mm Lhodpfxegvwgcj Anxel total power requirement 2 x 0,37 kW load capacity drive unit max. 2500 kg load capacity rotating unit max. 2500 kg table turning speeds 100 - 1000 mm/min diameter of running wheel 250 x 140 mm weight of the machine ca. 0,9 t Incl. double foot pedal (start-stop / left-right) Incl. remote control (on the cable)

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, total length: 3,100 mm, Equipment: documentation/manual, STANDARD EQUIPMENT Special beam and column design, implemented as a complex structure, automatically ensures the bending process without requiring separate control or manual adjustment. The two upper press cylinders are individually controlled (on the Y1 and Y2 axes), allowing for angle correction in seconds. AKAS safety light curtain (motorized) Electric foot pedal with 2 pedals and panic stop function Electronic selection for “Teach-In” programming of each axis Upper tool clamp, two-sided, with mechanical quick tool clamping Inverter – reduced energy consumption High-speed function, 100 tons up to 3 m Operating hour counter, first oil fill AMNC 3i graphic control with 18.5" touchscreen: Y1, Y2 – left and right press cylinders X1, X2 – front-to-back movement of rear backgauges Z1, Z2 – lateral manual movement of rear backgauges (4-axis) R – simultaneous height adjustment of rear backgauges Operation from memory or directly from USB Tool library (only for AMADA tools) Programming: 2D graphic, numerical angle, and Teach-In programming; 3D graphic with external software Modular tool system (835 mm, 415 mm, and segmented version – optional) DigiPro angle measuring system, infrared Technical data: Press force (kN) – 1,000 Table length (mm) – 3,110 Distance between columns (mm) – 2,705 C-frame opening (mm) – 420 Stroke (Standard) (mm) – 200 Stroke (Long Stroke option) (mm) – 350 Installation height (Standard) (mm) – 470 Installation height (Long Stroke option) (mm) – 620 Table width (mm) – 180 Table height (mm) – 960 Speed (approach) max. (mm/s) – 200 Speed (working) (mm/s) – 15 Speed (return) (mm/s) – 150 Number of controlled axes – 7 Rear backgauge travel range (X-axis) (mm) – 700 Rear backgauge travel range (X-axis, backgauge tilted) (mm) – 1,020 Rear backgauge travel range (R-axis) (mm) – 250 Travel speed (X-axis) (mm/s) – 500 Travel speed (R-axis) (mm/s) – 160 Travel speed (Z-axis) (mm/s) – 1,000 Electrical requirement (kW) – 16.5 Oil tank (liters) – 160 Control – AMNC 3i graphic control with 18.5" touchscreen DigiPro angle measuring system, cable-free – standard accessory Communication options with the machine – USB, UTP network Lodpfozcg Ixsx Anxjhl External programmability – with BendCAM software

Condition: new, - Capacity: 100 tons - Cylinder stroke: 400 mm - Working width: 1500 mm - Cylinder is movable - Electrically or manually operated - Pressure gauge Lhedpfxoilvb No Anxel - Emergency stop - 400V