Flanging machine

HOMAG EDGETEQ T 200 / OPTIMAT KTD 720

Condition: excellent (used), Year of construction: 1995, Max. panel width 4400 mm Max. panel length 4300 mm Main saw blade projection 110 mm No of Grippers 8 Front Loading Beam Panel Saws Max. saw blade projection 110 mm Front support tables Nkodpfx Ajmt Hhwofhst no. tables 4 Control system NC 410 Safety standard CE mark Total installed power 20 KW

Condition: excellent (used), Horizontal Panel Beam Saw - With rear lifting table Numerical Control MCS Evolution Software Outside Rollers table for pre-loading (mm 4500 x 2200 ca.) Lifting table (mm) 4300 x 2200 Turning device (rotating unit) at 90° No. 2 Rear pushers (one with clamps / grippers) Twin Pusher No. 10 clamps / grippers Max. cutting width (mm) 4300 Useful stroke of the pushing system (mm) 4300 Max blade projection (mm) 135 Max clamps opening (mm) 133 Scoring Unit (max saw diameter / power) 200 mm Nkedpfjq Rfahjx Afhet Main Sawing Unit (max saw diameter / power) 460 mm - Kw 27 Adjustable speed of the saw carriage (m/min) 0 - 150 Front supporting tables with Air blowing system (N.) 4 Total power (Kw) 36 (ca.)

Condition: used, machine/vehicle number: 007875, Max. panel width: 3800 mm Nkedswkf Axepfx Afhst Max. panel length: 2200 mm Main saw blade projection: 130 mm No of Grippers: 7

Condition: used, machine/vehicle number: 005107, Stock dimension length: 18800 mm Stock dimension width: 15000 mm Nkjdpfx Afeiiipuehet

Condition: used, Shredding Machine LINI LW 40 - used - Hydraulic feed, PLC control, ----- Technical Specifications ----- Nodpfxswi Stne Afhokt Hopper opening: 600 x 820 mm, Hopper volume: 0.5 m³, Rotor diameter: 200/250 mm, Rotor length: 600 mm, Motor power: 18.5 kW, Weight: 1,050 kg, Dimensions (LxWxH): 2,070 x 1,260 x 1,640 mm, Screen hole size: 15 mm.

Condition: good (used), Year of construction: 2008, machine/vehicle number: 0-260-20-1170, Kantfräs & kap Brandt Type: Optimat FTK 130 No: 0-260-20-1170 Year: 2008 The FTK 130 has been conceived as complementary to edge banding machines. The main application of the FTK 130 is shaped workpieces, where internal as well as external radie can be processed. Also straight workpieces can be easily processed. Shaped workpiece trimming technology For small shops the FTK 130 is offering a flexible and cost effectiv solution for their trimming requirements. In order to process internal and external shapes, the trimming motors are mountedvertically. Milling and cutting units for simultaneous upper and lower radius/clean milling of excess edging material on workpieces with straight edges and on rounded workpieces with internal and outside radie. Cutting unit to precisely cut excess front and back edge trim material. in the longitudinal direction of the working pressure. Techn info: Milling unit Workpiece thickness approx. 12-55mm Workpiece width min approx. 30mm Inner radius min.ca.35mm Edging thickness max. approx. 3mm Milling tool 2xWPL radius cutter r=3, diameter 67x21x16mm Milling motors 11000v/min Cutting unit Workpiece thickness 12-55mm The thickness of the edging material max. 3mm Saw blade diameter 100mm Sawing width 3mm Center hole 36mm Compressed air 6 bar, connection 1/2", approx. 2000PA Nkodeq Ehpaopfx Afhjt Air consumption per stroke approx. 10NL Extraction power diameter 80mm, 510m3/h, air speed 28m/sec Current 400 volts, 2.5kw 50 hz, 3 phase, 16A Dimensions: 1130x765x1480mm (lxwxh) Weight 320 Kg Stock no: 2001877BXA

Condition: used, functionality: fully functional, power: 164.75 kW (224.00 HP), fuel: diesel, Year of construction: 1996, Equipment: additional headlights, parking heater, Firefighting Vehicle Body: Ziegler Water tank: 1,200 litres Foam tank: 100 litres Roof: walkable/non-slip High-visibility marking Outline marking Pump Manufacturer: Ziegler Normal pressure: 1,600 L/min at 8 Bar Chassis: MAN 10.224 Year of manufacture: 1996 Engine power: 224 HP Fuel: Diesel Twin tires/manual transmission Cab: Nodpowa R Tzsfx Afhskt MAN crew cab (1+1+7 occupants) Plug connections: 12V/24V Auxiliary heater Lighting Surround lighting Equipment compartment lighting Pump compartment lighting Cab lighting Roof lighting Additional spotlights Equipment Compartments Three equipment compartments each (left+right) 1 pump compartment (rear) Generous storage space, secure load securing Special Signal System Two blue rotating beacons Front strobe lights on bonnet Rotating beacon on rear body Electronic siren with multiple tones Additional Equipment Rapid intervention system > with 50m rigid hose Hygiene board optional Battery maintenance system Surround lighting Illuminated control elements Reversing camera optional Roof monitor optional All information is given to the best of our knowledge and belief, without guarantee for completeness or accuracy. This advertisement does not constitute an offer but serves as information. Subject to prior sale!

Condition: excellent (used), Year of construction: 2020, Shredder, ideal for pallet shredding, with inclined conveyor belt and magnetic drum. Rotor width 1000 mm, rotor diameter 368 mm. 56 knives on the rotor, 40 x 40 mm concave. 45 kW motor. Various screen sizes included. Nkjdpfjw Tyfljx Afhot

Condition: excellent (used), Year of construction: 1994, - Cutting length: 3200mm - Diameter: 76mm - Main motor: 7.5kW Njdewq Sl Tspfx Afhjkt - Scoring unit: 1.5kW

Condition: good (used), Year of construction: 2009, Motor 18.5 kW PLC control Rotor diameter 248 mm Hopper opening approx. 620 x 800 mm Sieve: Standard 30 cutting knives Suction nozzle 160 mm L x W x H approx.: 1732 x 1157 x 1650 mm Njdpfxowyiw Sj Afhskt Further technical data available upon request All information provided without guarantee