HOMAG Optimat BHX200 Vertical CNC Machining Center (2016)

HOMAG Optimat BHX200

Condition: good (used), Year of construction: 2011, machine/vehicle number: 2212.287, Automatic panelsaw Schelling Typ:FH 6 430 Maskin nr:221.287 År:2011 Panel beam saw Schelling with automatic, rear-feed,lifting table. For sawing board material, chipboard, MDF, Plywood, Board, Laminate etc. Techn info: Software MCS Evolution 2.0, SPS, Soft-SPS-Siemens WinAC Operating system WINDOWS XP PC with keyboard and mouse TFT monitor 17" Cutting length 4300mm, automatic detection of the start of the plate Cutting width 4300mm Machine accuracy of the cut length 3m +-0.1mm Positioning accuracy measured at input +-0.1mm Max diameter saw blade 460mm, spindle 30mm Pre-scoring blade 200mm, spindle 20mm motor operation is set from the control console Max panel thickness 120mm Panel stack aligner Main saw blade motor 27kw Saw blade over table 135mm Safety curtain Air cushion table with 3pcs air ball nozzles, radial ventilator fan Table sizes 2650x850mm 620x850mm 2650x2550mm Nwjdpfetk It Sox Afwsk Pressure beam with automatic adjustment of pressure to cut length and package height Package straightener before and after the pressure beam Max package height 120mm (incl. sum of curvature and board thickness tolerance) Pusher with 12 grippers Max clamp opening (gripper) 133mm Min-max force package straightener 400/2000N Speed saw carriage forward 6-150m/min Speed saw carriage back 150m/min Forward feed speed (pusher) up to 25m/min (according to EC Europa EN1870-13) other countries 80m/min Speed feeding back up to 80m/min Push-off device 3 pcs Lift table length x width 4350x2550mm Hydraulic unit Standard version 1600mm lifting height 1.25/2.5m/min raising speed, 1.25/5m/min lowering speed Maximum load 1200 kg/m2 total 9 tons Roller track driven rollers, frequency controlled for stack on lifting table 4100x2600mm Max stack weight 6500 kg Max stack length 1060mm Slots for forklift 4 pcs, distance in the middle 1200mm, slot width 300mm Light curtain for personal protection Roller conveyor driven for package frequency controlled input to lifting table left 5600x2600mm max load 6500kg Roller conveyor driven for packages frequency controlled input to lifting table right 5600x2600mm max load 6500kg Slots for forklift 2 pcs, center distance 900mm, slot width 400mm 2 positioning stops with roller for stack alignment Light curtain (double beam) for personal protection Roller table after saw depth 4300mm, free-running ployamide rollers Angle stop at the rolling table Infeed guide two-lane (beam length 7200mm) 2-sided hardened precision guides rack and pinion drive, two-sided Input carriage (pusher) gear rack servo drive, non-contact measuring system Gripper, (scissor clamps) in pusher 12 pcs Automatic adaptation of the clamping force to the package height (progressive clamping force) can be set to 0 Pusher for panels thickness greater than 6mm,material thinner than 6mm is fed manually Central cleaning system feed trough (pusher) Compressed air 6-8 bar, approx. 1600l/min Power 38 kw, 70 A. 3x400 volts, 50 Hz, operating voltage 24 VDC Dust extraction 4000m/h, air speed 30m/s Diameter connection 80mm (angle connection), 120mm /pressure beam), 150mm (sawdust channel) Total setup area without driven roller conveyors including protective grid approx: 11650x7300mm Driven roller tracks left-right 5500+5500mm Stock no: 2002125BXACEO Subject to incorrect technical data presented

Condition: used, Year of construction: 2025, functionality: unexamined, Homag Centateq P110 PROFI BMG110/3115/F/K CNC machining centre (2025) with  Almig Combi XP15 receiver mounted air compressor (2025) Nwodszc Rzpspfx Afwok Air Plants Dust Extraction Ltd dust extraction system (2025)

Condition: excellent (used), Year of construction: 2021, operating hours: 140 h, functionality: fully functional, feed length X-axis: 3,050 mm, feed length Y-axis: 1,250 mm, feed length Z-axis: 80 mm, input frequency: 50 Hz, input current: 29 A, working width: 3,050 mm, We offer this very good HOMAG DRILLTEQ V-500 throughfeed drilling machine, year of construction 2021. Working dimension X 3.050 mm Working dimension Y 1.250 mm Working dimension Z 80 mm Number of milling spindles 1 Main motor power 10 kW Rotation speed max 24.000 rpm Tool clamping system HSK-F63 Tool changer positions 4 Vertical drilling spindles Nwedpjylp Slofx Afwok 15 Horizontal drilling spindles in X 6 Horizontal drilling spindles in Y 4 Groove saw 90° turnable Vertical working surface Machine table Feed-through technology Special workpiece clamping system clamp gripper Barcode reader Safety device enclosed cabin Control Homag powerTouch, HOMAG POWER CONTROL Software HOMAG WOODWOP 7.2 Conformity marking CE mark Category: Machining centre Type designation: DRILLTEQ V-500 Subtype: OPTIMAT BHX200 Machine number: 0-250-73-7195 Wiring diagram: 0-250-73-7195 Supply voltage: 400Y/230 V Neutral conductor: yes Phases: 3 Frequency: 50 Hz Maximum operating full load current: 29 A Fuse rating: 35 A Control voltage: 24 V If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), Code: 0348 Brand: VITAP - ITALY Model: POINT K2 TOP - CE Standard CNC working centre for the precise and flexible drilling and milling of panels, furniture, custom-made furniture, kitchens, bathroom furniture and various – CE Standard – Year 2017 Technical specifications: Compact machine Nwjdpfoyzrxzsx Afwjk Patented D.D.T. (double dynamic transport) system with continuous panel movement without any repositioning of the workpiece, using two clamps. Technical data: Panel dimensions: Min/max length 270/3000 mm Min/max width 180/1100 mm Max height 50 mm Horizontal panel feed on X-axis 25 mt/min Vertical feed on Z-axis 15 mt/min Horizontal feed on Y-axis 30 mt/min Drilling head: Motor 2 Hp 12 vertical spindles side 1 Z-axis 2 horizontal spindles side 4 Y-axis 2 horizontal spindles side 6 of the Y-axis 2 horizontal spindles side 3 X-axis 2 horizontal spindles side 5 X-axis Centre-to-centre distance between spindles 32 mm Max horizontal bit diameter 15 mm Max horizontal drilling depth 30 mm Max vertical drilling depth 55 mm Router unit: Motor power 5 Hp - 24.000 rpm Blade unit: Diameter mm 100 x 4 - 7.000 rpm TPA software Horizontal milling unit Infeed roller conveyor 800 x 600 mm Outfeed roller conveyor 800 x 600 mm Suction port diameter : 1 mm 50 - 2 mm 100 Compressed air 7 bar Overall dimensions mm 2530 x 1700 x 1900 h Weight kg 833

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 - in stips / lippings mm max 1 Panels thickness (min/max) mm 14 / 60 (LASER - Max 50) Numerical Control ICOS Open Feeding speed (adjustable) m/min 6 - 30 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Panels in-feed (servo) system A1 / 15 Pre-milling Unit (vertical joint trimmers) 08.378 (2 x Kw 4,5) adjustable by N.C. Glueing Unit (P.U.R. Glue + Quick Melt unit) 283.201 + 283.203 Glueing Unit (Thermofusion with Laser) Laser System LASERLINE Spraying Unit (for anti-release liquid) Band Pressure zone + Edge coils supporting unit (No. 36 + 12 reels) Snipping (end-cutting) 08.42 (Kw 0,2 x 2) work speed up to 30 m/min (0°-25°) Rough Trimming unit 08.0555 HS/LS1 (Kw 1 x 2) Fine Trimming unit (Multi-profile, by N.C. adjustment, for 4 profiles) 08.0587 (Kw 0,66 x 1) Multi-Profile Copying unit by N.C (fine + contour trimming) KFA 30 (Kw 0,5 x 1) max 30 m/min Profile Scraping unit (Multi-profile, by N.C. adjustment, for 4 profiles) 08.0516 Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.614 (Kw 0.25 x 4) Nsdoi Hn Srspfx Afwewk No. 2 Milling grooving units 08.190 (Kw 4,5 x 2) swivelling 90°/180°/270° (adjustable by CN)

Condition: used, Shredding Machine LINI LW 40 - used - Hydraulic feed, PLC control, ----- Technical Specifications ----- Hopper opening: 600 x 820 mm, Hopper volume: 0.5 m³, Rotor diameter: 200/250 mm, Rotor length: 600 mm, Nwedpfx Aswi Stnjfwek Motor power: 18.5 kW, Weight: 1,050 kg, Dimensions (LxWxH): 2,070 x 1,260 x 1,640 mm, Screen hole size: 15 mm.

Condition: good (used), Year of construction: 2016, machine/vehicle number: 0-250-95-3820, operating hours: 13,696 h, Workpiece length X: 200-3050 mm including roller conveyor Workpiece width Y: 50-1250 mm Workpiece thickness Z: 8 - 80 mm Vector speed: X/Y = 50 m/min; Z = 15 m/min Equipment: VERTICAL BORING UNIT V 15 HIGH SPEED including quick-change system and spindle clamping HORIZONTAL BORING UNIT WITH 6 SPINDLES IN X DIRECTION HORIZONTAL BORING UNIT WITH 4 SPINDLES IN Y DIRECTION NUT SAW IN X/Y DIRECTION 90° PLAUSIBILITY CHECK (X/Y) TOOL CHANGING SPINDLE 9 KW including converter 4-POSITION PICK-UP CHANGER, side-mounted POSITIONING CYLINDER for workpiece positioning WORKPIECE CLAMPING SYSTEM Nsdpfx Aozlbwfjfwowk WORKPIECE HANDLING MACHINE CONTROL: POWERCONTROL with Powertouch MACHINE OPERATION: POWERCONTROL SOFTWARE: WOODWOP; TOOL DATABASE; MACHINE DATA ACQUISITION; PRODUCTION LIST SOFTWARE; OFFICE PACKAGE; WOODWOP DXF IMPORT BASIC; WOODASSEMBLER; 3D SIMULATION Operating voltage: 400 VOLT; Frequency: 50 HZ Energy-saving function

Condition: used, machine/vehicle number: 005910, X axis working area: 2500 mm Y axis working area: 1300 mm Main Electrospindle power: 6 KW Number of controlled axes: 3 axes Nodpfewuckhox Afwewk Total number of drilling spindles: 84

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, Equipment: CE marking, documentation/manual, Automatic edge bander with EVA glue pot, chain panel feed, pre-milling, and corner rounding units. Technical features and options: • Feed speed: 9 m/min • Permissible panel thickness: 8 – 50 mm • Permissible edge thickness in rolls or strips: 0.4 – 3 mm • Permissible edge thickness in strips (manual feed): max 5 mm • Maximum edge roll diameter: 800 mm • Minimum panel length: 110 mm Nedpfsy Izktsx Afwswk • Minimum panel length for cross-cut unit VR1/VS1: – With workpiece height h=18 mm: 180 mm – With workpiece height h=50 mm: 210 mm • Minimum panel width: 70 mm Machine equipment: • Conveyor belt with rubber pads • Pressure beam with bearing-mounted rubber rollers • Automatic edge feeder • Pressure rollers • Extendable support for safe positioning of large workpieces • Touchscreen control panel • Automatic cleaning agent spray unit (for easier removal of glue residue and to reduce glue buildup) • FLEX quick-change glue pot system • Internal LED lighting • CE certification

Condition: excellent (used), FLEXIBLE SYSTEM OF SINGLE-SIDE SIZING-EDGEBANDING (BATCH SIZE ONE) Composed of the following machines: M.01) PANELS HANDLING and RETURN SYSTEM "SIRIO" BATCH SIZE ONE M.02) SINGLE-SIDE RIGHT-HAND SIZE-EDGE BANDER "IMA" Novimat /I/R75/690/R3 Panels thickness (min/max) mm 8 / 60 - Working width (min/max) mm 200 / 1300 Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Numerical Control / Software ICOS Open (Batch Size One) Nwsdpfxjkt Uuae Afwjk Adjustable feeding speed (m/min ) 6 - 30 Panels in-feed system A1 / 15 N° 2 Pre-milling Unit (vertical joint trimmers) adjustable by N.C. 08.378 (4 motors x Kw 4,5) Glueing Unit (Hot Melt + Quick Melt Unit) VTG + 283.205 Edge coils supporting unit (No. 24 reels) Snipping (end-cutting) unit 08.42 / 30 / B / LS1 (2 x Kw 0,2) 0°-25° Rough Trimming unit 08.055.0.1680 (1 x Kw 0,85) Fine Trimming unit (Multi-profile, adjustable by N.C.) 08.0587 HS/LS1 (2 x Kw 1) Multi-Profile Copying unit by N.C. (fine and contour trimming) KFA x20 (1 x Kw 0,5) 20 m/min Profile Scraping unit (Multi-profile, adjustable by N.C.) 08.516 HS/LS1 Glue scraping unit 08.521 Buffing unit 08.617-2 (2 x Kw 0,18) N° 3 Milling grooving unit 08.190 (3 x Kw 4,5) Controlled by N.C. - (90°/180°/270°) M.03 ) PORTAL BRIDGE (UNLOADING/LOADING) "SIRIO"