Jointer planer & thickness planer combination

HUNDEGGER HM-C

Condition: refurbished (used), Complete Cutting Machine Group from LINCK: Nsdpfjrvh Tmsx Aacoku 1.Pre-cut feed table Linck EV20 (condition:good) 2.Chipper canter LinckV18 (condition: good) 5.Boad separator unit Linck SE (condition: refurbished) 1. EV20- Pre-cut feed table Linck EV20 for smaller logs. Hydraulic unit is included. 2. Chipper canter LinckV18. 2x85 KW motor with direct drive. Completely refurbished set. We can also offer full electrical installation and assembly of line on site.

Condition: used, Year of construction: 2002, operating hours: 37,000 h, machine/vehicle number: 1651, arm reach: 15,200 mm, load capacity: 1,900 kg, track width: 3,000 mm, Equipment: cabin, crane, Year of manufacture: 2002 Machine number: 1651 Track, m: 3.0 Crane type: OBX II (year of manufacture 1997) Reach: 15.2 m Load capacity without grab: 1,900 kg / 15.0 m Grapple: included Nsdpfx Ajv Hwk Ueacsku Crane arrangement: behind the cabin Cab side: middle !! Sold on behalf of the customer!!

Condition: used, Year of construction: 2005, functionality: fully functional, REX BIGMASTER 410-K (A+D+FR+FL+AFV4+MVG+2.FR+2.FL+HFRo+HFRu+AZG) REX Georg Schwarzbeck GmbH & Co. KG Year 2005 REX= HEAVY DUTY 4-SIDE PLANING AND MOLDING MACHINE TYPE BIGMASTER 410 - K Machine with exchangeable cutter heads K lower planing shaft A upper planing shaft D vertical shaft/right side FR vertical shaft/left side FL chamfering device (4 spindles) AFV4 mid feed device MVG Nksdsu Sg T Tjpfx Aacju 2. vertical shaft/right side /profiling shaft 2.FR 2. vertical shaft/left side /profiling shaft 2.FL upper horizontal molding/profiling shaft HFRo lower horizontal molding/profiling shaft HFRu Heavy type out feed device AZG Machine with constant table height and adjustable upper part (height adjustment by 8 columns)

Condition: used, Year of construction: 2001, Wood dimensions to be processed: Input lengths min/max 500 - 6500 mm Full optimization up to max. 1500 mm Input widths min/max 40 - 300 mm Input thicknesses min/max 15 - 120 mm Wood cross-sections max. 300 x 40 mm max. 200 x 120 mm Fixed lengths after sawing min. 510 - 2800 mm Special application: Cutting blocks, length min/max. 100 - 200 mm (Caution: Multiple block lengths at the sorting line; blocks are transported to the end of the sorting line and fall into the customer's grid box). Cutting/cutting tolerance +/- 0.8 - 1.5 mm (for wood types with minimal resin content and an even surface. Tolerance up to 1 m fixed length, max. tolerance for longer pieces up to 2.5 m). Thickness tolerance +/- 3 mm. Curvature of the wood in all directions: max. 10 mm per meter in length. Wood types: soft or hardwood. System performance: Feed speed, continuously adjustable up to max. 230 m/cutting cycle 0.6 - 1. To obtain the practical output per day, an effectiveness factor dependent on the customer's production conditions must be calculated. Infeed and saw height: 900 mm (placed on customer's platform, saw requires concrete base). Sorting working height. 2000 mm Connection values: Total electrical connection value approx. 18 kW Operating voltage 380 Volt / 50 Hz Voltage fluctuations max. 5% Air consumption approx. 1200 NL/operating pressure approx. 8 bar Extraction speed approx. 30 m/nd Color pebble gray RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Item 1 Infeed and marking station with 1 side support table, adjustable 1 table as stop edge Item 2 Support roller without drive, front side in front of sheet metal table for easier feeding Item 3 Length measuring station with built-in fluorescence camera for detecting error markings Item 4 Automatic width measurement, contactless Item 5 OptiCut 304 optimizing cross-cut saw - right-hand version with built-in waste chute including equipment package for large wood cross-sections Graphic input terminal (16 x 40 characters, Numeric keypad) with software package for optimization and system control. Available for processing: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Item 6: Outfeed conveyor as sorting station with drive unit, length 7500 m Item 7: 2 ejectors mounted on the outfeed conveyor Nodpsw Sy T Hofx Aacsku Storage location: Nattheim

Condition: reconditioned (used), Year of construction: 2008, functionality: fully functional, saw blade diameter: 600 mm, working height: 900 mm, saw drive: 7,500 W, Mitre saw adjustable to 45° equipped with 6-meter pusher Nkjdpfx Aowzg E Neacju discharge deck with 6-strand loading chains for faster loading machine overhauled and fitted with a new digital touchscreen

Condition: used, Year of construction: 1998, functionality: fully functional, planing height: 250 mm, working width: 410 mm, overall weight: 5,500 kg, Planer REX TIMBERWORK 410x250 mm + 4x chamfers + saw spindle Year of manufacture: 1998 Location: France, Savoie Nodpfx Aowmm Alsacoku

Condition: like new (used), Min. input length: 500 mm, max. 6 m. Cross section: max. 140 X 250 Motor: 5.5 kW Sawing stroke servo swing arm Nedpfxor A Et To Aacsku Feed by means of rollers, 6 pieces top, 6 pieces bottom CNC control Maxi 8.0 1 X sorting unit per 11.5 m Machine is set up according to your wishes

Year of construction: 1990, condition: good (used), Sideloader used Kalmar, unit was well maintained Rest see pictures Nodjh Et E Nepfx Aaceku

Condition: ready for operation (used), Logintake with butt end reducer and debarker. Nksdotrd Hfepfx Aaceu Below parts included: - Log deck with log unscrambler and log singulator - Butt-end reducer type Bruks RR1000 - Debarker type cambio 70-66 - Out-feed log conveyor with logkicker

Condition: used, Working width 630 mm Working height 220 mm Nsdpfxex U Dvfe Aacsku Feed speed 7/9/14/18 m/min. Knife CentroFix Z4