Joinery machine

Hundegger SC1

Condition: good (used), Bandsaw line for big logs 1. Log conveyor 2. Buffering log deck and one piece feeder 3. Log conveyor and centering infeed with turner 4. Söderhamn AKE 245A Twin reducer bandsaw (ARI 6 knife heads) 5. Board separator with block turner 6. Side transfer of blocks 7. Block infeed 8. ARI BKR-600 9. ARI DS-75 multi rip saw 10. Edging line with ARI KT-52 Edger Cjdpfxsikvlie Ad Negn Price: 2 100 000 SEK, in existing condition on site. Line is complete but not all conveyor in bottom floor. Bruks 1503M chipper. No power on electric cabinets (no PLC software) Can be dismantled and loaded by UJ Trading AB Sawmill is located in Sweden.

Condition: used, mileage: 230,556 km, power: 368 kW (500.34 HP), first registration: 09/2017, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 6x2, wheelbase: 4,600 mm, fuel: diesel, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: automatic, suspension: air, total length: 10,320 mm, total height: 3,450 mm, loading space length: 6,430 mm, Year of construction: 2017, Equipment: ABS, AdBlue, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, lane keeping assist, parking heater, seat heater, traction control, trailer coupling, = Additional Options and Accessories = - Alarm system - Differential lock - Remote central locking - Lift axle - Air suspension - Towing jaw coupling Cedsv Uin Ispfx Ad Negn - PTO (power take-off) - Radio - Reversing camera - Disc brakes - Sun visor - Lane departure warning system - Auxiliary heater - Toolbox = Notes = Volvo FM 500 6x2*4 Lift and steering axle Full air suspension HMF 3220 K7 4 x hydraulic outriggers 7 x hydraulic extensions Scanreco radio remote control 4.70 m - 5,910 kg 6.50 m - 4,000 kg 8.40 m - 2,870 kg 10.30 m - 2,170 kg 12.40 m - 1,710 kg 14.50 m - 1,400 kg 16.70 m - 1,190 kg 18.90 m - 1,040 kg = Further Information = Technical Information Number of cylinders: 6 Axle configuration Brakes: Disc brakes Suspension: Air suspension Front axle: Tire size: 385/65R22.5; Steering; Left tire tread: 80%; Right tire tread: 80% Rear axle 1: Tire size: 295/80R22.5; Twin tires; Left inner tread: 80%; Left outer tread: 80%; Right inner tread: 80%; Right outer tread: 80% Rear axle 2: Tire size: 385/55R22.5; Steering; Left tire tread: 70%; Right tire tread: 70% Weights Unladen weight: 16,537 kg Payload: 11,463 kg Gross vehicle weight: 28,000 kg Functional Crane: HMF Environment Emission class: Euro 6c Financial Information Price: On request Identification Type number: FM500 / 6x2 / HMF 32TM / CRANE / = Company Information = ALL PRICES ARE NET FOR EXPORT. Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT), Russian spoken. We strive to provide correct information, but no rights can be derived from the texts provided.

Condition: good (used), Year of construction: 1990, RANDEK SP700 cut saw manufacture Randek Sweden Year 1990 in good condition Randek’s SP700 series provides reliable cut saws that are a major asset to roof truss and house producers around the world. The SP700 cut saw is effective, easy-to-use and accurate. It has been on the market for a long time and is continuously improved in close contact with our many customers. The blade on this semi-automatic saw supports angled cuts, which mean it can make any cuts you may require. You can also use the large diameter blade (700mm ) to cut several sections of stacked timber simultaneously. • Angled cuts from 0° to 360° • Cut heights up to 250 mm, possible to cut three boards each cutting cycle • PLC programmable saw • Fixation of timber near the cutting area resulting in accurate cutting roller conveyor system with 5 adjusteable pneumatic stoppers . Lenght 6,25m outfeeding roller conveyor 4,10m Complete line: 11,5m technical inforamtion under subjet of correction Cgsdpfx Ajh Ayyqsd Njn

Condition: new, capacity 90 degrees: round 350 mm capacity 90 degrees: square 330 mm 500 x 310 Cgsdpfxsfg E Hls Ad Nen band speed 15 - 100 m/min table height 844 mm dimensions of saw-band 4250 x 34 x 1,1 mm total power requirement 2,2 kW weight of the machine ca. 1,2 t dimensions of the machine ca. 1,4 x 2,4 x 1,935 m ACTION PRICE!!! 2-column double miter band saw K-tech DG 50/33 HA-I • 2-column miter saw • Solid, yet easy to use • Material height sensor (automatic cut start detection) • Smooth running thanks to bevel cut, feed controller + cutting pressure controller • Massive material infeed roller • Removable chip tray (disinfection) • Energy-saving and low-vibration thanks to bevel cut • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 -100 m/min. • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Large dimensioned wheels (520 mm) a. • Clear miter setting up to 60° Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Condition: excellent (used), Catalog number 6726 TECHNICAL DATA - Loading hopper inlet 280x300 mm - Discharge outlet for chipped wood Ø 310 mm - Rotor working width 340 mm - Main motor 22 kW - Number of knives 6 pcs - Dimensions (L/W/H) 1300x1150x1680 mm - Weight 720 kg ADVANTAGES – very good condition – used wood chipper Net price: 19,900 PLN Net price: 4,740 EUR Csdpoignt Ujfx Ad Negn Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Year of construction: 1977, condition: refurbished (used), I sell the double mitre saw Rapid DGS, year 1977. Tilting heads Drilling front heads on each side included Cgjdpfsd N Rb Dex Ad Nen Very good condition. Available immediately.

Condition: good (used), Offer freezer for freezer production. Various spare parts available. Motors only replaced two years ago. Fully functional. Csdpjt I Eycofx Ad Negn Collection only in 93437 Furth im Wald Sale without guarantee, warranty and return

Condition: new, Year of construction: 2024, MONOBLADE EDGER lenht of cut from 4,2 to 8,2 mt max depth of cut 160 mm Cgedsfw Nv Rspfx Ad Nen parallel guide hopper

Condition: used, Year of construction: 2010, Chalet construction machineused, good condition, little usedmake Krüsitype CMI 40year of manufacture 2010CE type-approvedbsi 140 mm round timber corner jointssaw 1xdrilling 1xrouting 3xworkpiece height 200 mmworkpiece width 250 mmweight approx. 2200 kgTotal connected load approx. kWStorage location 97447 Gerolzhofen, free loaded, unpackedHandover in actual condition as inspected,without guarantee and warranty Cgodpfsvwfqqjx Ad Nsn

Condition: good (used), Truck crane Renault 270 DCI 19 tonnes Year : 2002 470.000 km Echange standard engine done at 250 000 km Crane capacity : 5,5 tonnes Cgjdsrhzy Hjpfx Ad Nsn Technical check : OK Pas de télécommande de la grue