Pillar Drilling Machine

HUVEMA HU 40 Prof.

Condition: new, Year of construction: 2026, The CORMAK HBS275 band saw for cutting tubes, profiles and bars is widely used in all locksmith and metalworking workshops where precision, quality and cutting speed matter. The model is equipped with a 0-60° swivel arm; the saw guides are based on sintered carbide. The frame construction ensures accurate and quiet operation. Machine characteristics The horizontal metal band saw with swivel arm enables cutting in a plane perpendicular to the axis of the material being cut and at any angle within the range from 0 to 60°. The material to be cut can be fed manually or by any mechanical device, while the tool feed is automatic. The blade guides are equipped with special carbide plates and bearings. This has a major impact on blade guidance, service life, straightness, accuracy and cutting quality. Carbide guidance greatly reduces wear of the machine and blade. The machine is equipped with an efficient coolant pump with a closed coolant circuit. The saw arm is made of a single cast-iron casting and, together with the 27 mm wide cutting blade used in this saw, fully enables multi-series cutting of both profiles and solid materials. The vice is located in an adjustable bed and is equipped with a quick clamp. The blade guides are equipped with hard metal plates – sintered carbide and a rolling bearing system. It is precisely the SINTERED CARBIDE GUIDES that are responsible for the precision and straightness of the cut. The arm has been inclined at an angle of 25°, which increases blade durability and improves cutting conditions. A cleaning brush is mounted at the bottom of the arm to achieve excellent cleanliness and blade operation. The machine drive is transmitted via a worm gearbox. The machine has a three-phase motor with two cutting speeds and motor thermal protection. The shape of the upper part of the base forms a tray for draining coolant and collecting chips generated during material cutting. A cast-iron work table with a swivel arm and a control panel on a separate arm is mounted to the base. In the cutting process, the main cutting movement is the movement of the cutting blade, while the feed is the lowering of the arm. The arm lowering speed (cutting speed) is regulated by a hydraulic cylinder. The feed speed is adjusted on the saw control panel. Two cutting blade speeds are available: 37.5 and 75m/min. In the lower position of the arm (after cutting the material), the cutting blade drive is switched off automatically. Safety is ensured by cutting blade guards and micro-switches that stop the motor after the cutting cycle is completed or when any guard is opened; additional protection consists of automatic shutdown of the saw in the event of cutting blade breakage. The machine drive is transmitted by a motor with a worm gearbox. The motor with thermal fuse protects against overheating during operation. Technical data TOTAL POWER 1.5kW POWER SUPPLY 400V 50Hz ARM LOWERING ADJUSTMENT hydraulic cylinder BLADE LENGTH 2450 x 27 x 0.9 mm BLADE SPEED 37.5 / 75m/min VICE BASE HEIGHT 900 mm MACHINE DIMENSIONS (WITH ARM RAISED) (L x W x H) 1720 x 800 x 1800 mm Codpfxeudi Une Apbsrh WEIGHT 215 kg

Condition: used, Column drilling machine ALZMETALL, type AB 3 ESV Machine no. 15967, year of manufacture 1977 Drilling capacity 32 mm Spindle mount MK 3 – short quill Distance from spindle nose to table 545 mm (short quill) Distance from spindle adapter to table 395 mm (MK adapter) Overhang 290 mm Quill stroke 160 mm Table size Ø 545 mm Column diameter 220 mm Spindle speed 55 – 1450 rpm, continuously variable Motor power 1 / 1.6 kW Power connection 380 volts, 50 Hz - Spindle speed controlled via 2 gear stages, 2 motor speeds, and continuously variable via a variator gearbox - Pre-selection stage for high torque at low speeds - MK adapter from MK3 to MK4 - Automatic feed 0.1 - 0.2 - 0.3 mm/rev - Rotatable drilling table - Table height adjustment via hand crank - Heavy machine base with machined workpiece support surface (not original Alzmetall) - Lighting for the work area Cedeharwvepfx Apbjrh Space requirement L x W x H 1150 x 650 x 2000 mm Weight 850 kg Good condition

Condition: used, Year of construction: 1989, Technical details: bore capacity in steel (diameter): 28 mm throat: 285 mm bore stroke: 165 mm drill capacity in cast iron: Ø 35 mm spindle taper MT: MK 3 spindle speed:: 65 - 1.750 / 4x steples U/min feed: 0,1; 0,2; 0,3 manuell/automatisch mm/U Distance spindle/table max.: 80 - 680 mm table clamping surface:: 500 x 370 mm table rotating: 360 ° drill table adjustment: 600 vertical mm column diameter: Ø 130 mm total power requirement: 7,5 kW weight of the machine ca.: 273 kg dimension machine xH: 0,9 x 0,6 x 1,9 m Crsdpfxsu Idkzj Apboh The machine can cut threads, change of direction left/right selectable via foot switch and/or depth stop Table can be swiveled and adjusted in height. *

Condition: new, cutting diameter 235 mm dimensions of saw-band 2645 x 27 x 0,9 mm cutting width 280 x 190 mm cutting speed 45/90 m/min 120 mm 120 mm 190 mm Cedpfop Scqyex Apbsrh Impact energy 170 mm connected load frequency 400 Volt total power requirement 1,1 kW weight of the machine ca. 290 Kg dimensions 1,2 x 0,8 x 1,2 m Double miter band saw -Miter cuts up to 60° left and 45° right -Vice with quick clamping device -Band tension control -Electr. Automatic cooling

Condition: new, Bernardo BM 32 SB pillar drilling machine Maximum drilling capacity: 32 mm Drill chuck: 1 - 16 mm / B 18 Morse taper: MK 4 Spindle speed: (12) 150 - 2450 rpm Overhang: 255 mm Swiveling drilling table: 360° Distance spindle / table, max.: 750 mm Distance spindle / base plate: 1210 mm Quill stroke: 120 mm Column diameter: 92 mm Table size / T-slot size: 385 x 335 mm / 14 mm Credpfxed Tcchj Apbjh Work surface of base plate: 380 x 335 mm Motor output: S1 100% 1.1 kW / 400 V Motor input: S6 40% 1.6 kW / 400 V Machine dimensions (W x D x H): 450 x 800 x 1730 mm

Condition: reconditioned (used), Year of construction: 1987, Universal Tool Milling Machine Manufacturer: DECKEL Crodpfsx A Eddsx Apbjh Model: FP 2 Aktiv Year of manufacture: 1987 – overhauled, newly painted with new machine electrics RAL7035 light grey / RAL7012 basalt grey RAL5008 grey blue Machine no.: 2202-11579 Milling head type: 2271 Milling head no.: 300-3606 with warranty Geometric acceptance with inspection report Accessories: - 3-axis active digital readout HEIDENHAIN TNC 113 - Fixed table 660 x 380 mm (T-slot: 12 mm) - Vertical milling head SK 40 with drawbar thread S 20 x 2 - Central lubrication, hand-operated - Coolant system - Operating manual - used, as seen -

Condition: used, Year of construction: 2007, machine/vehicle number: 1377, SECOND HAND PNEUMATIC END CUTTING SAW STROMAB MOD. TR500 - CE RULES - with electronic positioning stop TIGERSTOP of 4000mm - infeed roller table of 4500mm - outfeed roller table of 4500mm - blade diameter: 500mm - maximum cutting capacity: 360 mm (L) at 60 mm (H), 135 mm (H) at 280 mm (L) - 10 hp motor - 415 volts - serial number: 1377 - year 2007 Crodpfx Apst U Izpjbsh

Condition: good (used), Type: SSB 3 A Machine No.: 5607 Year of manufacture: 1973 Crodpfx Apjxlqxfeboh Equipment: - MK3 quill - Machine lamp - Quick-action drill chuck incl. morse taper arbor, clamping range 3-16 mm - Infinitely variable speeds Range 1: 0-900 rpm Range 2: 0-1700 rpm - Thread cutting device Condition: good, workshop-tested, speed variator with new bearings

Condition: ready for operation (used), A used, but well-maintained SB 25 pillar drill is for sale, as shown in the pictures. Credpeit Rfbsfx Apbeh

Condition: used, bore capacity in steel (diameter) 40 mm throat 300 mm bore stroke 170 mm 4 speeds 70 - 1400 U/min table-size 600 x 450 mm total power requirement 3,0 kW weight 350 kg dimensions 1200 x 800 x 2150 mm Features: - Automatic feed - Coolant device Csdpfxovvnlne Apberh - Infinitely variable speed control - Adjustable fixed depth stop - Drill chuck